• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1326-1332
• /
• 2000

본 연구에서는 Ka 밴드 대역의 LMDS에 사용될 수 잇는 저잡음증폭기를 MMIC로 설계하고 제작하였다. 능동소자로는 p-HEMT를 사용하였으며, 주파수가 높으므로 저주파 MMIC에서 사용되는 수동 소자인 spiral 인덕터나 MIM 커패시터를 사용하지 못하고 마이크로스트립라인을 이용하여 증폭기를 설계하였다. 증폭기 설계 시 안정도를 해결하고 잡음 지수를 낮추기 위하여 RC 궤환회로와 소스 인덕터를 사용하였으며, 제작된 증폭기는 4단 증폭기로 26.5 GHz에서 이득 27.4dB, 잡음지수 3.46 dB를 얻었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.829-831
• /
• 2012

본 논문은 차량 추돌 예방 레이더용 고 이득 저전력 저잡음 특성을 가진 24GHz 저잡음 증폭기(LNA)를 제안한다. 이러한 회로는 TSMC $0.13{\mu}m$ 혼성신호/고주파 CMOS 공정($f_T/f_{MAX}=120/140GHz$)으로 설계되어 있다. 증폭기의 전압 이득을 향상시키기 위해 2단 캐스코드 구조로 구성되어 있다. 제안한 저잡음 증폭기는 최근 발표된 연구결과에 비해 41dB의 가장 높은 전압이득과 3.7dB의 가장 낮은 잡음지수 및 2.8dBm의 가장 우수한 IIP3 특성을 각각 보였다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.03a
• /
• pp.297-303
• /
• 1998

본 논문에서는 게이트 길이 0.25um, 게이트 폭 150um(6 $\times$25)um 인 HEMT를 이용하여 11.7GHz~12.2GHz 대역 위성방송용 수신기의 기본회로를 설계하였다. 수신기는 저잡음증폭기, 믹서, 국부발진기, 중간주파수증폭기로 구성되어 있으며 LO 주파수는 10.75GHz 이고 IF 주파수는 0.95 ~1.45GHz 이다. 수신기의 설계목표는 전체이득 32dB 이상, 잡음지수 2.6dB 이하, 입출력 단의 반사손실은 각각 -10dB, -10dB 이하이며 저잡음증폭기, 믹서 및 중간주파수증폭기의 최소이득 및 최대잡음지수 14dB, 1dB, 믹서는 각각 0dB, 10dB, 중간주파수증폭기는 각각 18dB, 5dB 가 되게 설계하였다. 저잡음증폭기와 중간주파수증폭기는 2단으로 , 믹서는 이중 게이트구조로, 국부발진기는 반사형의 구조로 설계하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2015

In this paper, we present design and measurement of LNA(Low Noise Amplifier) based on GaN HEMT(Gallium Nitride High Electron Mobility Transistor) to reduce the total noise figure of radar receiver and for robustness of LNA. In radar receiver using LNA based on GaAs(Gallium Arsenide) technology, limiter is necessary at the very front of the radar receiver to protect LNA. As a result, total noise figure of radar receiver is deteriorated. In this research, measured noise figure of LNA based on GaN HEMT is below 2 dB. In the case of commercialized GaAs LNA, recommended maximum input power is about 30 dBm. On the other hand, GaN HEMT LNA which is designed and measured is burned-out when input power is 43 dBm and robustness is guaranteed at input power 45.4 dBm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1158-1165
• /
• 2004

This paper describes the design of a two stage 1V power supply SiGe Low Noise Amplifier operating at 5.25㎓ for 802.lla wireless LAN application. The achieved performance includes a gain of 17㏈, noise figure of 2.7㏈, reflection coefficient of 15㏈, IIP3 of -5㏈m, and 1-㏈ compression point of -14㏈m. The total power consumption of the circuit was 7㎽ including 0.5㎽ for the bias circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.485-491
• /
• 2003

In this paper, We designed the multi-stage amplifier having high gain/low noise characteristics for terrestial repeater of direct digital satellite broadcasting system. In the design the amplifier, we optimized the parameters to have the stable operation between gain, noise figure and stability. The first stage of amplifier can be specified low noise impedance matching, 2nd stage to 5th stage show constant gain and stable operation and final stage of amplifier shows high gain impedance matching. As a result of experiment at the frequency of digital satellite terrestial, show 68dB gain under 2,4dB noise figure and 63dB dynamic range in the 11.7GHz-12.7GHz frequency range, it is a good agreement of communication channel amplifier requirements for satellite terrestial repeater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.713-721
• /
• 2004

This paper presents a high Performance LNA based on InGaP/GaAs HBT for 5.4㎓ WAM band applications. During the past days, InGaP/GaAs HBT has been being used for mainly high power amplifiers, but InCaP/GaAs is recognized as a suitable device for RF single chip. At this point, the research about a high performance LNA based on InGaP/GaAs HBT must be preceded, and in this paper, a excellent linearity and noise characteristics LNA based on InGaP/GaAs HBT is desisted and fabricated. The LNA is integrated in new of 0.9${\times}$0.9$\textrm{mm}^2$ single chip with high Q spiral inductors and MIM capacitors. The proposed LNA is biased at current point for optimum noise figure and gain characteristics, futhermore, excellent linearity is achieved. The proposed LNA shows 13㏈ gain, 2.1㏈ noise figure, and excellent linearity in terms of IIP3 of 5.5㏈m.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.897-904
• /
• 2011

In this paper, a novel circuit topology of a low-noise amplifier tunable at 1.8GHz band for PCS and 2.4GHz band for WLAN using a CMOS active inductor is proposed. This circuit topology to reduce higher noise figure of the low noise amplifier with the CMOS active load is analyzed. Furthermore, the noise canceling technique is adopted to reduce more the noise figure. The noise figure of the proposed circuit topology is analyzed and simulated in $0.18{\mu}m$ CMOS process technology. Thus, the simulation results exhibit that the noise performance enhancement of the tunable low noise amplifier is about 3.4dB, which is mainly due to the proposed new circuit topology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.67-76
• /
• 2000

In this paper, a low noise amplifier has been developed, which is operating at L-band i.e., 1525-1575 MHz. By using resistive decoupling circuits, the resistor dissipates undesired signal in low frequency band. By adopting this design method the stability of the LNA is increased and the input impedance matching is improved. The LNA consists of the low noise GaAs FET ATF-10136 and the internally matched VNA-25. The low LNA is fabricated by both the RP circuit and the self-bias circuits in an aluminum housing. As a result, the characteristics of the LNA implemented show more than 32 dB in gain, lower than 0.5 dB in noise figure, 18.6 dBm output gain in 1 dB gain compression point.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.161-166
• /
• 2003

This paper presents a high gain LNA for a bluetooth application using 0.25$\mu\textrm{m}$ CMOS technology. The conventional one stage LNA has a low power gain. The presented one stage LNA using a cascode inverter LNA with a voltage reference and without a choke inductor has an improved Power gain. Simulation results of the 2.4GHz designed LNA shows a high power gain of 21dB, a noise figure of 2.2dB, and the power consumption of 255mW at 2.5V power supply.