• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.79-87
• /
• 2008

There has been a strong demand for low altitude UAV development in rapid mapping not only to acquire high resolution image with much more low cost and weather independent, compared to satellite surveying or traditional aerial surveying, but also to meet many needs of the aerial photogrammetry. Especially, efficient geocoding of UAV imagery is the key issue. Contrary to high UAV potential for civilian applications, the technology development in photogrammetry for example direct georeferencing is in the early stage and it requires further research and additional technical development. In this study, two approaches are supposed for automatic geocoding of UAV still images by simple affine transformation and block adjustment of affine transformation using minimal ground control points and also evaluated the applicability and quality of geometric model compared to geocoded images generated by commercial S/W.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.65-66
• /
• 2014

좁은지역에 대한 지형정보의 획득은 저고도 UAV시스템을 이용하는 것이 경제적이다. 최근 자동항법 UAV의 발전은 저고도 고해상도 영상을 원하는 주기로 얻을 수 있어 많은 분야에 응용하고 있다. 이러한 UAV시스템은 지상관제센터와 비행체 간의 긴밀한 통신이 이루어져야 하며 촬영 중 영상의 획득 여부를 모니터링할 수 있어야 한다. 본 연구에서는 NASA가 개발한 Worldwind를 커스터마이징하여 실시간 영상획득 모니터링 s/w를 개발하였다. 또한 개발시스템을 이용하여 정사영상 모자익을 실시하였으며 이에대한 정확도 분석을 실시하였다. 분석결과 검사점에 대해 정사모자익영상의 수평위치 정확도를 분석한 결과 X좌표에서 평균 0.181m, Y좌표에서 평균 0.203m의 편차를 보임으로써 1:1,000~5,000축척의 수치지도제작이 가능할 것으로 판단된다.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.13-19
• /
• 2018

In this paper, we classified a flight pattern of unmanned aerial vehicle(UAV) which will be operating in UTM system and analyzed its flight pattern by purpose of use. Flight patterns of UAV are sorted into three patterns which are circling, monitoring and delivery. We considered four cases of industry areas using UAV which are agriculture, infrastructure monitoring, public safety & security(p.s.s) and delivery. It is necessary to build a simulation model as a verification tool for applying the flight pattern according to the use of UAV to the real UTM system. Therefore, we propose the simulation model of UAV with updating states over time. We applied simulation to UAV monitoring flight pattern, and confirmed that the flight was done by the given input data. The simulation model will be used in the future to verify that the UAV has various flight patterns and can operate safely and efficiently for the intended use.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.4
• /
• pp.789-796
• /
• 2015

The first phase of architecture design is the field survey of the site and its surroundings. To gather the information there are two methods :the traditional method of an onsite survey, and recently using 3D geometry data and high quality image mapping from online services such as Google Earth. However, the urban condition is fast changing, and information from online services may lack sufficient information. This paper presents the to fast and effective site survey method for urban site using an affordable and fully automated UAV for the architectural design field.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.37-47
• /
• 2006

In the last years a low-altitude image acquisition technology has been developed in application of frequent change monitoring in urban area md speedy surveillance in disaster area. A low-altitude photogrammetric system have advantages of accurate observation and free data-acquisition time. Especially, an unmaned RC-helicopter, improving safety, durability and portability, comes into the spotlight as a built-in vehicle in close range photogrammetric application due to their capability of safe near-by observation and effective flight performance. This paper gives a methodology for generating image map by development of low cost and timesaving low-altitude photogrammetric UAV(unmaned aerial vehicles) for collecting high-resolution image data, and implement of geo-rectification and image mosaicking.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.749-756
• /
• 2013

This paper presents an algorithm concerning the ground altitude measurement using a laser altimeter and an ultrasonic rangefinder for UAV(Unmanned Aerial Vehicle). A simple ground test conducted using the laser altimeter and ultrasonic rangefinder that are used for conducting the low altitude measurement of UAV and identify the characteristics of each sensor. Especially, the disadvantages of the laser altimeter were checked through the ground test. After that who those are participated in this paper planned the algorithm which is complemented by the ultrasonic rangefinder and the experiment was conducted. The laser altimeter and the ultrasonic rangefinder were fused by a loosely coupled method by Kalman filter. The paper shows that stable value of altitude complemented by the ultrasonic rangefinder that covers the laser altimeter's drawbacks can be measured through the ground test.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.45-58
• /
• 2020

According to the Ministry of Land, Infrastructure and Transport press release ('18.12.21.) The amendment of the Aviation Business Act will reduce the capital requirements for aviation leisure operators and make it easier to enter aviation leisure businesses by improving regulations on small air transportation business. In addition, as the scale of the UAV(Unmanned Aerial Vehicle) sector is expected to increase globally, the dramatic increase in low altitude operating aircraft, including this, must be taken into account. The low altitude aircraft category is divided into small airplanes, helicopters, light aircrafts and ultra-light aircrafts, and instructors include school instructor pilots and student pilots, military and national helicopter pilots, and aviation leisure operators. In case of low altitude aircraft, there are cases of canceling operations due to low visibility and low clouds, and aircraft accidents due to excessive operation and sudden weather phenomenon. Therefore, in order to prevent low-altitude aircraft accidents, a safe flight plan based on weather conditions and weather forecasts and more accurate and local weather forecasts and weather forecast data are needed to prepare for the rapidly changing weather conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1343-1351
• /
• 2014

Recent technological advances in wireless networks and microelectromechanical systems (MEMS) have led to the development of different types of mini-UAVs and their utilizations in various ways. This study endeavors to develop a low-cost mini-UAV with autonomous flight capability, in order to obtain geospatial information of a small or medium-sized area, and also assess its flight stability by comparing the predetermined flight paths against the actual flight paths. Based on a post-development flight test, stable flight has been proven achievable as follows: the maximum endurance speed is 1 hour, the flying distance is 50km, the horizontal accuracy of flight paths is about ${\pm}6{\sim}8m$, and the altitude accuracy is about ${\pm}8m$. Therefore, it is deemed that high-resolution images which can be utilized for geospatial information are obtainable. This indicates that a UAV flying at an altitude of 200m can acquire images across a $2km{\times}3km$ area on the ground within 25 minutes, which validates its high usability for obtaining high-solution images at low altitudes in the future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.57 no.3
• /
• pp.28-35
• /
• 2015

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.