Geocoding of Low Altitude UAV Imagery using Affine Transformation Model

부등각사상변환을 이용한 저고도 UAV 영상의 지형보정

  • 김성삼 (연세대학교 건설공학연구소) ;
  • 정재훈 (연세대학교 사회환경시스템공학부) ;
  • 김의명 (남서울대학교 지리정보공학과) ;
  • 유환희 (경상대학교 건설공학부) ;
  • 손홍규 (연세대학교 사회환경시스템공학부)
  • Published : 2008.12.30

Abstract

There has been a strong demand for low altitude UAV development in rapid mapping not only to acquire high resolution image with much more low cost and weather independent, compared to satellite surveying or traditional aerial surveying, but also to meet many needs of the aerial photogrammetry. Especially, efficient geocoding of UAV imagery is the key issue. Contrary to high UAV potential for civilian applications, the technology development in photogrammetry for example direct georeferencing is in the early stage and it requires further research and additional technical development. In this study, two approaches are supposed for automatic geocoding of UAV still images by simple affine transformation and block adjustment of affine transformation using minimal ground control points and also evaluated the applicability and quality of geometric model compared to geocoded images generated by commercial S/W.

위성측량이나 기존의 항공측량에 비해 경제적이면서 기상영향을 덜 받는 저고도 고해상 영상의 취득과 항공사진측량의 많은 수요를 충족하기 위해 신속한 맵핑을 위한 UAV(Unmanned Aerial Vehicle) 기술 개발이 요구되고 있으며, 특히 효율적인 지형보정에 관한 연구가 중요한 이슈로 부각되고 있다. 그러나, 민간분야 활용을 위한 UAV의 높은 잠재력에 비해 최근까지 직접 지형보정과 같은 사진측량측면에서의 기술개발은 초기 단계에 머물고 있으며, 지속적인 연구와 추가적인 기술개발 노력이 필요하다. 본 연구에서는 최소한의 지상기준점 정보를 이용하여 간편한 부등각사상변환식과 부등각사상변환의 블록조정에 의해 자동으로 저고도 UAV 영상을 기하보정하는 기법을 제안하였으며, 상용 프로그램 처리결과와 비교를 통하여 UAV 정지영상 기하모형식으로서의 적용가능성을 평가하였다.

Keywords