• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.9-22
• /
• 2019

In this paper, we propose a method that can be applied to the efficient implementation of multi-channel active noise controller. Since the normalized MFxLMS (Modified Filtered-x Least Mean Square) algorithm for the multi-channel active noise control requires a large amount of computation, the difficulty has lied in implementing the algorithm using a low-cost MCU (Microcontoller Unit). We implement the multi-channel active noise controller efficiently by optimizing the software based on the features of the MCU. By maximizing the usage of single-cycle MAC (Multiply- Accumulate) operations and minimizing move operations of the delay memory, we can achieve more than 3 times the performance in the aspect of computational optimization, and by parellel processing using the auxillary processor included in the MCU, we can also obtain more than 4 times the performance. In addition, the usage of additional parts can be minimized by maximizing the usage of the peripherals embedded in the MCU.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.21-27
• /
• 2019

Recently, embedded systems have been introduced in various fields such as smart factories, industrial drones, and medical robots. Since sensor data collection and IoT functions for machine learning and big data processing are essential in embedded systems, it is essential to port the operating system that is suitable for the function requirements. However, in embedded systems, it is necessary to separate the hard real-time system, which must process within a fixed time according to service characteristics, and the flexible real-time system, which is more flexible in processing time. It is difficult to port the operating system to a low-performance embedded device such as 8BIT MCU to perform simultaneous real-time. When porting a real-time OS (RTOS) to a low-specification MCU and performing a number of tasks, the performance of the real-time and general processing greatly deteriorates, causing a problem of re-designing the hardware and software if a hard real-time system is required for an operating system ported to a low-performance MCU such as an 8BIT MCU. Research on the technology that can process real-time processing system requirements on RTOS (ported in low-performance MCU) is needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.421-430
• /
• 2003

In the embedded system, EPROM is difficult to replace a mask ROM for the applications using battery, because the low voltage characteristic of an EPROM is inferior to that of a mask ROM. In this paper, the new circuits such as a word line voltage hoosier scheme and a sense amplifier without reference input for an embedded EPROM in MCU are proposed. The circuits can detect bit line voltage a predetermined level, which is caused by the degradation of the battery. We fabricated a MCU embedded 32Kbytes EPROM. The proposed circuits well operated at 1.5V supply voltage and thus the low voltage performance was improved by about 30%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2820-2827
• /
• 2015

HSMS communication system using low-cost micro controller units(MCUs) is an essential technique for online semiconductor equipment system developments. It is intended as an alternative to SEMI E4 (SECS-I) for applications where higher speed communication is needed and the facilitated hardware setup is convenient. In this paper, an HSMS communication system using low-cost MCUS is designed and implemented. Using a MCU with a low price but high-performance as a main board, a module which processes HSMS communication is designed, and a circuit is designed to process BCR independently with a microminiature MCU. To convert tag data which is recognized from BCR into data based on HSMS communication protocol, SECS-II message is designed. Lastly, an HSMS communication system is implemented based on these designs. A low-cost HSMS communication module developed in this study can be applied in realtime monitoring and controlling system for semiconductor processes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.953-955
• /
• 2014

최근 차량 충돌 방지를 위한 다양한 기술이 상용화되고 있다. FMCW 기반의 레이더 시스템은 구현의 용이성으로 많은 상용차에서 전면 충돌 방지 시스템에 적용되고 있다. 측면 충돌 방지를 위한 BSD(Blind Spot Detection)와 차선변경 보조 시스템(LCA, Lane Change Assistant system)에서는 전방 레이더보다 인식거리가 줄어들고 갱신율이 낮아지므로 고속 FFT 등을 수행하는 신호처리부를 저가격으로 설계가 가능할 것이다. 본 연구에서는 TI사의 MCU인 F28335를 사용하여 근거리를 인식하는 신호처리부를 설계하였다. 이 MCU는 16채널 12bit ADC와 68KB RAM 및 512KB 플래시 메모리를 내장하고, 150MHz 부동소수점 연산을 지원하여 단일 칩으로 신호처리부의 구현이 가능하다. 구현된 시스템은 20m내외의 거리에 있는 장애물에 대하여 10Hz로 갱신이 가능하여 BSD를 위한 기본 기능이 확인되었다. 이러한 구현은 이전의 고가의 DSP나 FPGA를 사용하지 않고 15$이내의 단일 MCU와 간단한 아날로그 회로로 설계되어 저가격의 시스템으로 상용화가 가능할 것이다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.735-736
• /
• 2008

Recently Multi media industry require HDMI-CEC which is the system to integrate various product one action. So you need to implement CEC when you use HDMI1.3a. In this paper, presented how to make CEC protocol in MCU and how to reduce power consumption. This system implement CEC protocol and uart communication as using WELTREND MCU.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.110-120
• /
• 2016

A power-efficient neuromodulator is needed for implantable systems. In spite of their stimulation signal's simplicity of wave shape and waiting time of MCU(micro controller unit) much longer than execution time, there is no consideration for low-power design. In this paper, we propose a novel of low-power algorithm based on the characteristics of stimulation signals. Then, we designed and implement a neuromodulation software that we call NMS(neuro modulation simulation). In order to implement low-power algorithm, first, we analyze running time of every function in existing NMS. Then, we calculate execution time and waiting time for these functions. Subsequently, we estimate the transition time between active mode (AM) and low-power mode (LPM). By using these results, we redesign the architecture of NMS in the proposed low-power algorithm: a stimulation signal divided into a number of segments by using characteristics of the signal from which AM or LPM segments are defined for determining the MCU power reduces to turn off or not. Our experimental results indicate that NMS with low-power algorithm reducing current consumption of MCU by 76.31 percent compared to NMS without low-power algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.144-155
• /
• 2013

This paper presents a low-cost remote power-quality-failure monitoring system (RPMS) using Android App and TI MCU (micro-controller unit), which is appliable to a micro-grid. The designed RPMS testbed consists of smart nodes, a server, and Android APPs. Especially, the C2000-series MCU-based RPMS smart node that is low-cost compared to existing monitoring systems has both a signal processing function for power signal processing and a data transmission function for power-quality monitoring data transmission. The signal processing function implements both a wavelet-based power failure detection algorithm including sag, swell, and interruption, and a FFT-based power failure detection algorithm including harmonics such that reliable and real-time power quality monitoring is guaranteed. The data transmission function implements a low-complexity RPMS transmission protocol and defines a simple data format (msg_Diag) for power monitoring message transmission. We may watch the monitoring data in real time both at a server and Android phone Apps connected to the WiFi network (or WAN). We use RS-232 (or Bluetooth) as the wired (or wireless) communication media between a server and nodes. We program the RPMS power-quality-failure monitoring algorithm using C language in the CCS (Code Composer Studio) 3.3 environment.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.

• Journal of Broadcast Engineering
• /
• v.10 no.1 s.26
• /
• pp.77-82
• /
• 2005

We propose a highly Integrated motion estimation processor (MEP) for efficient video compression in an SoC platform. When compressing video by the standards like MPEG-4 and H.263, the macroblock related functions motion compensation. mode decision, motion vector prediction, and motion vector difference calculation require the frequent intervention of MCU. Thus the proposed MEP incorporates those functions with the motion estimation capability to reduce the number of interrupts to MCU, which can lead to a highly efficient SoC system. For low-power consumption, the proposed MEP can prevent the temporally static area from motion estimation or can skip the half-pel motion estimation for those macroblocks whose modes are decided as INTRA.