• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.494-500
• /
• 2006

Life Cycle Assessment(LCA) is an environmental assessment tool for evaluating environmental burdens associated with products, processes and activities from the raw material acquisition stage to the end-of-life stage. End-of-life stage as well as other processes requires a reliant database in order to increase the confidence in the LCA results. In this study, the flow of Personal Computer(as PC) in the end-of-life stage was examined and the database of two scenarios has been established, i.e. one is part reuse and the other is no part reuse, in the end-of-life phase of PC. Also, key environmental issues were identified by carrying out LCA on a PC in the end-of-life phase for eight environmental impact categories. The 'ozone layer depletion' contributes the highest environmental impact due to generation of $Cl_2$ gas during the incineration of waste plastics. In addition, the scenario 1(part reuse) is more environmentally sound than the scenario 2(no part reuse) when comparing two scenarios.

• Clean Technology
• /
• v.8 no.4
• /
• pp.205-215
• /
• 2002

Can industry has grown up with growth of packing industry and its recycling activation in recent years. But profit has became low by oversupply. Therefore, can industry needs a reduction of environmental load and official loss by an optimization of process in order to maintain its competitiveness. In this study, the main issues of aluminium can production was investigated by life cycle assessment. As a result of LCA, it examined closely by main issues that reduce defective cans and remove tramp oil. In the present work, it was recommended that setup of R/O system, sterillizing tramp oil separation, and heating system of DI water. The ROI investigated 6.4 months. The operating cost with the advanced processes could be reduced annually by 300 million won.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.153-157
• /
• 2010

We studied the adsorption efficiency of steelmaking slag in removing volatile organic compounds (VOCs) for increasing the recycling rate of steel-making slag. Ceramic filter was prepared by mixing the steel-making slag and the diatomite which is used as adsorbents due to the advantage of the high specific surface area and regular mesopores. The adsorption efficiency for VOCs removal was about 80%, 96% and 85% in acetaldehyde, formaldehyde and ammonia, respectively. The adsorption efficiency over 80% for all The gases showed the practical possibility as the adsorption filter.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.117-120
• /
• 2005

21세기는 정보화 사회로서 정보와 지식이 사회를 움직이는 원동력이며 국가 경쟁력의 기반이 되고 있다. 정부에서는 정보 통신 기술(ICT) 교육 지침을 정하여 2001학년도부터 초등학교, 중학교, 그리고 고등학교에서 정보 소양 교육과 각 교과별 교수 학습에 ICT기술을 10%이상 활용하도록 권장하고 있다. 따라서 일선학교에서는 이러한 정보 사회의 교육환경 변화와 요구에 부응하여 ICT활용 교육을 위한 교수 학습 지도안을 여러 가지 방법으로 작성하고 있으나 현재까지 web을 통한 학습지도안 작성은 매우 미흡한 상황이다. 이에 본 연구에서는 ICT활용 학습지도안을 시공간의 제약 없이 작성, 수정, 검색, 그리고 활용이 가능한 학습지도안 작성시스템을 web을 기반으로 설계하여 학습지도안의 공유 및 재활용 등을 용이하게 함으로써 지도안 작성시간을 대폭 줄일 수 있도록 하였다. 또한 학습지도안과 수업자료를 데이터베이스에 저장하여 데이터의 효율적인 관리와 검색이 가능하게 하였으며, 수업활동 종료 후 형성평가 문제의 출제 및 평가 결과가 계속 누적되어 앞으로의 개인별, 수준별 학습활동에 참고자료로 활용될 수 있도록 하였다. 학습자도 시공간의 제약 없이 학습지도안 검색이 가능하므로 학습자의 예습 복습을 용이하도록 하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.61-70
• /
• 2002

This paper presents the engineering property of light weight soil made of soil mixed with recycled Styrofoam and stabilizer. Recycled Styrofoam is widely used for lightweight fill material because it has important geotechnical characteristics which are light, adiabatic, and effective for vibration interception. It is very easy to get the disposal styrofoam. For this study, dynamic compaction test, static compaction test and pH and leaching tests were performed. Based on the test results, it is concluded that the static compaction method is recommened to prevent from crushing materials and pH values of embankment materials are satisfied with these of domestic and RCRA configuration.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.465-472
• /
• 2012

This research aims to find an effective mixing method for controlled low strength material (CLSM) using diverse recycled industrial byproducts. This study is a fundamental research to develop and commercialize a resource-recycling CLMS that can greatly contribute to cost reduction and environmental stress relief. In the past, few studies have been performed on CLSM in Korea. This research is expected to provide fundamental data not only for development and commercialization of the resource-recycling CLSM satisfying required material performances but also serve as a ground breaking study on utilization of recycled material in construction industry and ultimately leading to advanced resource-recycling practices at national level. From the comprehensive analysis of minimum unit quantity for maximum strength and material segregation prevention, it was found that the optimal mixing condition for mixing FSD, RSID and SD material to filler-aggregate ratio (f/a) was approximately 50.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.558-565
• /
• 2002

Coal fly ash, produced from a power plant in Korea was used for the production of glass-ceramics and the physical properties of glass-ceramics were evaluated. CaO and TiO$_2$ were added into the fly ash during the melting process to reduce the viscosity of molten glass and to induce internal crystallization of glass, respectively. Glass-ceramic was produced through a single stage heat treatment (at 950∼1050$\^{C}$ for 37∼240 min) after preparing glass (iota fly ash powder. As a result, a new tiny rod type crystals (a=7.4480, b=10.7381, c=4.3940 A, $\alpha$=94.9, $\beta$=98.6, γ=108.5°) was found in the glass-ceramics, which showed attractive mechanical properties, high hardness (7.1∼7.6 GPa) and wear resistance (by erosion test). Thus a glass-ceramic produced from thermal power plant fly ash and cell as a source for CaO exhibits a suitable treatment for the recycling and exploitation of waste materials and would be acceptable for a new application far building materials.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.4
• /
• pp.153-161
• /
• 2020

This study investigates the recycling potential of demolition waste (DW) according to building structure, while considering economic aspects. For that, this study surveyed 1,034 residential buildings to collect reliable information on demolition waste generation rates (DWGRs). This study suggested a method for operational cost calculation for each stage and carried out an inventory analysis. The economic value of recycled DW materials was also calculated. And then, the recycling potential(RP) was calculated by building structures and waste types. RP by building structure was low (27-40%), and RP was found in the order of masonry-block, wooden, RC and concrete-brick. By type of DWs, the RP of aggregates was considerably lower than 7%, and DWs such as wood, plastics, and metals showed more than 100% RP. Considering the results of this study, In order to improve the RP of buildings and DWs, the diversification of products that recycled waste like aggregates (i.e., mortar, concrete, bricks, blocks, tiles) and the development of high value-added products are considered to be the most urgent problems. Based on the above RP results, this study proposed a more advanced method for life cycle assessment of buildings and demolition waste.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.58-65
• /
• 2021

In this study, as a method to increase the recycling of circulating fluidized bed combustion ash(CFBCA), CFBCA was utilized to produce autoclave aerated concrete product since CFBCA contains quicklime and calcium sulfate components that are required for the manufacture of autoclave aerated concrete. Successful achievement of such objective will bring cost reduction with high value addition, saving of natural resources, and the reduction of environmental load. Various mixing designs were designed to evaluate the properties of autoclave aerated concrete made of CFBCA. Based on series of experimental program, prototypes mix design for factory manufacturing was obtained. According to the experimental results, it was confirmed that gypsum can be replaced with CFBCA through the method of pre-treating the CFBCA as a slurry. It was possible to produce competitive autoclave aerated concrete products using CFBCA.

• Clean Technology
• /
• v.22 no.3
• /
• pp.181-189
• /
• 2016

This research was performed to evaluate the food waste recovery facility using optimization performance index. In 2014, the generated amount of food waste occupied approximately 27% in total municipal solid waste. The 97.2% of the food waste was recycled and the others were treated through landfill and incineration in the portion of 0.9% and 1.9%, respectively. In food waste recovery facilities of year 2014, the composting and feed facilities were 49.5% and 22.9%, respectively. The feed facility showed higher scores in all technological, environmental, and especially economical evaluations than those of composting facility. As results of overall optimization performance index, the feed facility has higher score of 61.5 than 52.7 of composting facility. It was demonstrated that the feed facility has the advantage, compared with the composting facility.