DOI QR코드

DOI QR Code

The adsorption efficiency of ceramic filter media prepared with the steel-making slag for the removal of VOCs

휘발성 유기화합물 제거를 위한 제강슬래그로 제조된 세라믹 여재의 흡착효율

  • Sin, Jun-Ho (Dept. of Materials Scienc & Engineering, The Center for Green Materials Technology, Andong National University) ;
  • Kim, Tae-Heui (Dept. of Materials Scienc & Engineering, The Center for Green Materials Technology, Andong National University) ;
  • Park, Kyung-Bong (Dept. of Materials Scienc & Engineering, The Center for Green Materials Technology, Andong National University)
  • 신준호 (국립안동대학교 재료공학과, 청정소재에너지기술연구센터) ;
  • 김태희 (국립안동대학교 재료공학과, 청정소재에너지기술연구센터) ;
  • 박경봉 (국립안동대학교 재료공학과, 청정소재에너지기술연구센터)
  • Received : 2010.03.29
  • Accepted : 2010.05.07
  • Published : 2010.06.30

Abstract

We studied the adsorption efficiency of steelmaking slag in removing volatile organic compounds (VOCs) for increasing the recycling rate of steel-making slag. Ceramic filter was prepared by mixing the steel-making slag and the diatomite which is used as adsorbents due to the advantage of the high specific surface area and regular mesopores. The adsorption efficiency for VOCs removal was about 80%, 96% and 85% in acetaldehyde, formaldehyde and ammonia, respectively. The adsorption efficiency over 80% for all The gases showed the practical possibility as the adsorption filter.

본 연구에서는 제강슬래그의 재활용 범위를 확대하기 위하여 제강슬래그를 접촉여재로 활용한 유기화합물의 흡 착성능을 평가하였다. 또한 표면에 미세한 기공을 가지고 있어 흡착여재와 여과필터로 많은 연구가 되어온 규조토를 제강 슬래그와 혼합하여 세라믹 여재를 만들고 유기화합물 흡착 특성을 평가하였다. 유기화합물로는 아세틸알데히드, 포름알데히드, 암모니아 기체를 사용하였으며, 각각 80%, 96%, 85%의 흡착 효율을 나타내었다. 사용된 모든 기체에 대해서 80% 이상의 흡착효율을 나타내어 흡착여제로의 활용 가능성을 확인할 수 있었다.

Keywords

References

  1. J.M. Kim, E.G. Kwak and K.S. Bae, "The properties of underwater hardening epoxy mortar used the rapidly cooled steel slag", J. KCI Structural 19(5) (2007) 549.
  2. K.H. Kim, I.S. Kil and D.H. Kim, "Adsorption characteristics of VOCs in activated carbon beds", J. KOSAE, 24(4) (2008) 455. https://doi.org/10.5572/KOSAE.2008.24.4.455
  3. B.B. weinberger and R.B. Garber, "Titanium dioxide photocatalysts produced by reactive magnetron sputtering", Appl. Phys. Lett. 66(18) (1995) 2409. https://doi.org/10.1063/1.113956
  4. J. Augustynski, "The role of the surface intermediates in the photoelectrochemical behavior of anatase and rutile $TiO_{2}$", J. Electrochem. Ata. 38(1) (1993) 43. https://doi.org/10.1016/0013-4686(93)80008-N
  5. J.H. Hyun, M.G. Kim, I.Y. Nam and J.S. Baek, "Removal of heavy from wastewater using steelmaking slag and sludge", J. of Korean Inst. of Resources Recycling 8(1) (1999) 11.
  6. S.S. Lee, J.S. Kim, C.Y. Yunn and J.H. Yi, "Adsorption characteristics of the sericite and diatomite for ammonia gas", Clean Technology 12(3) (2006) 175.
  7. D.Y. Shin, J.Y. Kim and S.N. Ji, "A study on the drinking water treatment by precoat filtration and activated carbon adsorption process", Kor. J. Env. Hlth 30(5) (2004) 402.