• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.42-47
• /
• 1998

We have fabricated electron-optical lens for micro E-beam system that can overcome the limitation of current E-beam lithography. Our electron-optical lens consists of multiple silicon electrodes which were fabricated by micromachining technology and assembled by anodic bonding. The assembled system was installed in UHV chamber to observe the emission characteristics of focused electrons by the electro-optical lens. We used STM(Scanning Tunneling Microscope) tip for electron source. By performing lithography with the focused electrons with PMMA(poly-methylmethacrylate) as E-beam resist. We could draw 0.13${\mu}{\textrm}{m}$ nano-scale lines.

• Composites Research
• /
• v.13 no.3
• /
• pp.58-66
• /
• 2000

CARALL(Carbon fiber reinforced aluminum laminates) was fabricated with CFRP prepreg and A17075, using a autoclave. The mechanical properties of three samples i.e. A17075, CFRP and CARALL were also investigated as a function of size in circular holes. Theoretical approach into analysing mechanical behaviors near the circular hole notch was carried out to compare with experimental data, furthermore. By the adhesive bonding of A17075 to CFRP, abrupt strength reduction was prevented. From the consideration of modified point stress failure criterion, predicted results was well consistent with the experimental one.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.608-610
• /
• 1998

분산 M/VC 응용 프로그램의 조립식 작성기, DOC(Distributed Object Composer)는 M/VC(Model/View.Controller) 모델 기반 실시간 클라이언트/서버 응용의 신속한 개발을 지원한다. 본 논문에서는 DOC를 이용한 분산 M/VC 응용 프로그램의 조립식 작성 과정과 함께 그 구현을 소개한다. DOC는 개방화 및 표준화를 주도하는 CORBA 미들웨어를 기반으로 하여, 이질적인 통신 환경에서 클라이언트와 서버 객체간의 네트워크 투과성을 제공하고, 분산된 객체들 간의 상호작용(interaction) 패턴을 추상화하여 조립식 분산 응용 프로그램의 작성을 가능하게 한다. 분산 객체들 간의 상호작용을 처리하기 위해 자바의 관찰자/피관찰자(Observer/Observable) 패턴을 분산 관찰자/피관찰자 패턴으로 확장하여, serverDOC와 clientDOC로 구성된 DOC의 구현에 사용한다. 분산 피관찰자는 M/VC의 모델에 해당하고, 분산 관찰자는 뷰.콘트롤러에 해당한다. 개발자는 분산 환경을 고려하지 않고 필요한 관찰자/피관찰자 객체들을 생성하여 로컬상의 DOC에 조립식으로 연결하기만 하면 피관찰자의 상태 변화는 곧 관찰자에게 전달되고, 관찰자를 통한 사용자의 입력은 피관찰자에게 전달되어 반영된다. DOC를 이용한 응용 프로그램의 작성은 구성 객체들을 DOC에 plug-and-play 방식으로 조립하는 과정이다. 따라서 DOC는 분산 환경하의 컴포넌트 재사용성을 개선하고, 분산 응용의 생산성을 높인다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.32-39
• /
• 2015

So far, square concrete filled tubular(CFT) columns have been used in a limited width thickness ratio. The reason is that local buckling occurs in steel tube easily. Once the local buckling occurs, the confinement effect of steel tube on concrete disappears. In this study, we developed welded built-up square steel tube with reinforcement which are placed at the center of the tube width acts as an anchor. 3 specimens of slender welded built-up square CFT columns and 3 specimens of slender welded built-up square steel tube columns were manufactured with parameters of width(B) of steel tube, width thickness ratio(B/t). we conducted a experimental test on the 6 specimens under eccentric load, and evaluated the structural resistance and behavior of 6 specimens.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.196-204
• /
• 2010

In this paper, we develope a defect inspection method for each buttons of keypad of cellular phones before they are assembled. The proposed algorithm consists of the similar color checking and its classification, font error detection, and scratch detection based on the segmentation of keypad area and font, translation and rotation processing sequentially. Especially, the proposed segmentation method approximate the pad region as B-spline function to deal with illumination change due to the shape of key button with the slant and curved surface followed by simple thresholding. And also, the rotational information is obtained by using eigen value and eigen vector very fast and effectively. The experimental results show that the performance of the proposed algorithm is good when it is applied to in-line process.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1435-1442
• /
• 2004

Among many recent methods developing software, the method of component-based development (CBD), which refers to the method of treat-ing software as parts of a larger whole, and developing new applications through the assembly and synthesis of existing software, has been thoroughly studied. CBD, however, has demerits that cause difficulty in making inferences and understanding the code of components. and lack adequate documentation because the method of CBD divides systems according to the functional characteristics of these systems. Therefore, this study shows how to reuse components without difficulty and reduce the development time of systems and development costs by compensat-ing for the weak points of the method of CBD. Aspect-Oriented programming technique has been applied to the method of CBD and the UML diagram for this purpose.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.769-770
• /
• 2011

This paper presented a method constructing the ITSoC(Information Technology System-on-Chip). In order to implement the ITSoC, designers are increasing relying on reuse of intellectual property(IP) blocks. Since IP blocks are pre-designed and pre-verified, the designer can concentrate on the complete system without having to worry about the correctness or performance of the individual components. Also, embedded core in an ITSoC access mechanisms are required to test them at the system level. That is the goal, in theory. In practice, assembling an ITSoC using IP blocks is still an error-prone, labor-intensive and time-consuming process. This paper discuss the main challenge in ITSoC designs using IP blocks and elaborates on the methodology and tools being put in place for addressing the problem. It explains ITSoC architecture and gives algorithmic details on the high-level tools being developed for ITSoC design.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.281-290
• /
• 2003

In order to investigate recycling possibility as a construction material of oyster-shells, the geotechnical characteristics including permeability, confined compression and shear strength of crushed oyster shell were quantitatively examined in terms of fineness modulus and relative density of crushed oyster-shell. Experimental results show that the crushed oyster-shells are lighter than sand in weight, and have similar characteristics on permeability and shear strength to sandy soils. The oyster-shell can be considered as highly crushable material but not much crushable with existing high loads. Based on the laboratory test results, it is highly fudged that the crushed oyster-shell can be a substitute of sand as SCP materials.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.239-244
• /
• 2011

Nano Imprint Lithography(NIL) is technique for copying a pattern from stamp with nano size pattern in order to replicated the materials. It is very important to demold in order to make NIL process effectively. Self Assembled Monolayers(SAM) coater is manufactured by means of decreasing surface energy with the stamp surface treatment to improve release characteristics. Manufactured device contains tilting and rotation option for increasing process life time by coating on the sidewall of the pattern in stamp. The stamp coated with optimized tilting angle $30^{\circ}$ and rotation speed of 10rpm has more imprinting cycles than the stamping coated without tilting and rotation. Effective SAM coating on the sidewall of the pattern in stamp will improve by 50% of process life time.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.451-456
• /
• 2003

최근 대부분의 대규모로 추진되는 공공 서비스 목적이나 민간 사용 목적의 공간정보 구축 및 시스템 개발 분야는 실제 데이터베이스 구축이나 기술 개발에 앞서 ISP(정보화 전략계획: Information Strategy Planning)의 수립을 선행하는 경우가 일반적이다. 본 연구는 2000년부터 추진중인 한국전자통신연구원의 4S 기술개발 사업에 선행하여 수행된 4S 연계기술지원 사업의 ISP에 포함된 주요 기술사양을 분석하고, 분석 결과에 대하여 급속히 변화하고 있는 4S 관련 정보 기술동향을 반영함으로서 국내 상황에 적합하고 향후 사업에도 적용이 가능한 확장 모델로 제시하는 것을 목적으로 한다. 기본적으로 4S 기술개발 사업은 GIS-SIIS-GNSS-ITS 등 공간정보를 대상으로 하거나 주요 정보자원으로 이용하는 분야의 연계 기술을 컴포넌트 기반으로 개발하고, 개발된 컴포넌트에 대해서는 컴포넌트의 통합 또는 조립과 시험 검증과정을 통하여 국내외에서 전개되고 있거나 추진중인 다양한 공간정보 관련 사업에 적용 가능하도록 하는 것을 목적으로 하고 있다. 이러한 성과로 4S 기술개발 사 4S 모바일 컴포넌트 개발등과 같은 단위사업을 중심으로 소개되고 있었으나 이러한 단위 사업의 도출과정이나 추진 전략 또는 컴포넌트 연계 또는 재사용 과정등에 대하여는 체계적으로 알려진 경우가 거의 없다. 따라서 본 연구에서는 이러한 부문에 대한 내용을 기술적인 측면에서 분석하고, 이를 보다 확대하여 4S 컴포넌트 기반 단위 사업의 활용 가능성을 발전시킬 수 있는 확장된 아키텍처의 정립 과정으로 수행되고 있다.