• Resources Recycling
• /
• v.5 no.1
• /
• pp.14-20
• /
• 1996

For recycl~ng alumhx~rn dross, the cbaraclcrislics of dross and ils reutll~zalin~af~te r plocsssing should he considered. Nurn~llumd ross was classified according to iB sire in this shldy. Tbe dross larger Illan 3001~1w as directly re-meltcd to recover aluminum, and the s~nallerd ~ossw as leachcd and riln~tedl o scparalc 111s eri~lerls alt and to oxidize the rnelals contained in the dross. As a rcwlt, amount of the dross uscd lo be dircarded ahcr processing could hc reduced Also, lhc chem~cal culnposit~ons of a domzstic alumlnum dross and the changes in con~posilii~ndsu ring processings were investigated. and Cound that most mctaU'ic aluminum in the dross was changed inlu alu~n~numox ide lhruugli the roasting. Tile processed dross would he ulillzed for malerials such as alumina, alumma cemenl or tilcs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.168-173
• /
• 2012

We performed this study to develop antithrombotic agents from oriental medicine herb extracts. Polygonum cuspidatum has been traditionally used as an edible medical resources for the treatment of cancer, pyodermatitis, hepatitis, cystitis, and inflammation. However, the effects of Polygonum cuspidatum on thrombosis and platelet activation are not precisely understood. The antithrombotic and antiplatelet activities of Polygonum cuspidatum were investigated by assessing the effect of a 70% ethanol extract of Polygonum cuspidatum on blood coagulation, fibrinolysis, and platelet aggregation. Polygonum cuspidatum showed effective fibrinolytic activity at 10 mg/mL. Polygonum cuspidatum also inhibited adenosine diphosphate induced platelet aggregation. Furthermore, evaluation of anticoagulant activity showed that an extract of Polygonum cuspidatum prolonged coagulation time via activated partial thromboplastin time (APTT). Our results show that Polygonum cuspidatum can be a potential candidate for antiplatelet activity as well as a fibrinolytic agent.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.32-36
• /
• 2009

The physical properties of freeze-dried Aloe vera gel powders were examined according to the influence of the concentration degrees of the gel solutions as raw materials during freeze-drying. As a pre-treatment prior to freeze-drying, the gel solutions were vacuum-concentrated at three concentration levels (g water/g solids): high (H), 76; medium (M), 119; and low (L), 159. The water contents of the three powder samples were almost the same. For their viscosity measurements, non-Newtonian fluid behavior with shear thinning was observed in samples H and M, whereas Newtonian liquid behavior was found in sample L. In electrical conductivity measurements, sample H showed the highest conductivity upon dissolving the powder in water. For their water sorption isotherms, sample H was analyzed to have the least amount of bound water. Finally, it was determined that the degree of concentration caused only slight differences in the physical properties of freeze-dried Aloe gel powders.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.85-93
• /
• 2003

Droplet vaporization at various ambient pressures is studied numerically by formulating one dimensional evaporation model in the mixture of hydrocarbon fuel and air. The ambient pressure ranged from atmospheric conditions to the supercritical conditions. The modified Soave-Redlich-Kwong state equation is used to account for the real gas effects in the high pressure condition. Non-ideal thermodynamic and transport properties at near critical and supercritical conditions are considered. Some computational results are compared with Sato's experimental data for the validation of calculations. The comparison between predictions and experiments showed quite a good agreement. The droplet lifetime increases with increasing pressure at temperature lower than the critical temperature, however, it decreases with increasing pressure at temperature higher than the critical temperature. The solubility of nitrogen can not be neglected in the high pressure and it becomes higher as the temperature and the pressure go up.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.56-62
• /
• 2011

Zirconium is used in nuclear reactors as a structural material due to its excellent corrosion resistance and to low neutron crosssection. Variation in the distribution and solubility of Zr(IV) with solution pH was obtained. Distribution of Zr(IV) containing species in HCl and $HNO_3$ solution was analyzed by considering the complex formation of Zr(IV) species with the anion of the inorganic acid. Bromley interaction parameter between $ZrO^{2+}$ and nitrate ion was estimated by using the reported data on the solvent extraction of Zr(IV) by Cyanex272 from $HNO_3$ solution. This Bromley parameter can be utilized in calculating extraction isotherm of Zr(IV) and in predicting the separation factor between Zr(IV) and Hf(IV).

• Composites Research
• /
• v.12 no.6
• /
• pp.15-21
• /
• 1999

Carbon fibers were coated with carboxy modified poly(hydroxy ether)(C-PHE, water dispersed), water soluble polymers poly(hydroxy ether ethanol amine)(PHEA) or water insoluble poly(hydroxy ether)(PHE). Interfacial shear strength of polymer coated carbon fibers was measured by micro-droplet tests with vinyl ester resin, and approximately 30 samples were tested. The interfacial adhesion of poly-mers to carbon fibers was also evaluated, and diffusion behavior of polymer films in vinyl ester resin was investigated. The carbon fibers after testing and diffusion samples were analysed by SEM in order to understand adhesion mechanism. Interfacial shear strength of carbon fibers was enhanced by the coating of PHE and C-PHE which have good or marginal solubility in vinyl ester resin, respectively, but not by the coating of PHEA possibly due to the poor solubility in vinyl ester resin.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.146-152
• /
• 2001

To avoid the intrinsic problem of aggregation associated with the traditional solution-phase refolding process, we propose a solid-phase refolding method integrated with expanded bed adsorption chromatography. The model protein used was a fusion protein of recombinant human growth hormone and a glutathione S transferase fragment. It was demonstrated that the EBA-mediated refolding technique could simultaneously remove cellular debris and directly renature the fusion protein inclusion bodies in the cell homogenate with much higher yields and less agregation. To demonstrate the applicability of the method, we successfully tested the three representative types of starting materials, i. e., rhGH monomer, washed inclusion bodies, and the E. coli homogenate. This direct and simplified refolding process could also reduce the number of renaturation steps required and allow refolding at a higher concentration, at approximately 2 mg fusion protein per ml of resin. To the best of our knowledge, it is the first approach that has combined the solid-phase refolding method with expanded bed chromatography.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.262-270
• /
• 2019

Ferronickel slag, which is an industrial byproduct, is activated by mechanochemical reaction as a nonferrous metal and can be used as an admixture. Therefore, ferronickel slag is used as a substitute resource of admixture. In this study, to evaluate the effect of mixed of ferronickel slag powder and admixture, a mortar using a mixture of ferronickel slag powder, quicklime, gypsum and calcium chloride was fabricated by vibrated and rolled manufacturing method. Strength were evaluated by flexural and compressive strength tests, and durability was evaluated by performing chlorine ion penetration resistance and chemical resistance test. When the substitution ratio of ferronickel slag powder is constant, it is considered that the mixed use of quicklime, gypsum and calcium chloride as admixtures increases the performance.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.04a
• /
• pp.254-255
• /
• 2009

국내 경수로 원전의 경우, 원전의 효율적, 경제적 운영차원에서 장주기 운전으로 패턴을 바뀌면서 핵연료봉 표면상에 크러드(crud)의 침적량은 점점 증가하는 경향을 나타내고 있다. 이러한 경향은 원자로의 출력 제어와 직결되면서 이에 대한 문제 해결을 위한 대표성이 있는 시료의 채취와 재현성이 있는 부식 생성물의 측정이 요구되어져 왔다. 원자로 계통 내에서 부식생성물의 농도변화에 대한 평가, 특히 입자농도가 증가되어지면 축방향 출력편차(Axial Offset Anomaly, AOA)가 발생될 수 있는 위험에 노출되거나, 핵연료 교체를 위해 발전소 정지시(shut down) 부식생성물의 방출이 급격히 증가되는 것으로 나타났다. 특히 입자성을 띤 물질은 존재의 특성상 이들 물질에 대한 대표시료의 채취가 어려울 뿐 아니라 grab 채취로 인해, 분석결과에 대한 재현성이 낮으며 계통 선량율의 제어와 작업자 피폭관리에 많은 어려움이 뒤따르고 있어 선진 원전 운영국에서는 앞 다투어 대표시료를 채취 할 수 있는 capillary sampling 법이나 integrated sampling법을 적용해 오고 있다. 본 논문에서는 국내 경수로 원전에서 일반적으로 사용하고 있는 grab sampling 법에 대한 문제점 파악과 해외 원전에서 사용 중인 capillary sampling 법의 국내 적용 가능성에 대해 살펴보았다.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.183-190
• /
• 2010

We fabricated urethane material based on properties of reversible and unfading for antic-ceramics restoration. This material with low viscosity was made hardness control possible that user want. And it have very strong adhesion and shear strength properties and is shown the best properties for pigment filling, anti-contractibility, coloring as like epoxy system materials. Particularly, the yellowing and ir-reversibility problem in epoxy restoration material were finally solved. So, there is guarantee in the eternity and stabilization of restoration for antic-celamics. And in order to show the reversible state of the restoration, we successfully dissolve this urethane materials in solvent after perfect restoring subsequently.