• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.379-387
• /
• 2017

The objective of this study is to develop sustainable PVA fiber-reinforced cementitious composites (FRCCs) that could exhibit comparable strength level to normal PVA FRCCs with no recycled materials. To evaluate mechanical properties of the FRCCs, compressive, flexural and direct tensile tests were conducted. In addition to the test, to calculate amount of carbon dioxide ($CO_2$) emission at the stage of manufacturing the FRCCs, life cycle inventory data base (LCI DB) were referenced from domestic and Japan. From the test results, the mechanical properties such as compressive, flexural and direct tensile strengths were decreased as the replacement ratio of recycled materials increased. And it was determined that the amount of $CO_2$ emission was reduced for the specimens with higher water-binder ratio (W/B) and replacement ratios. It was also found that binder intensity ($B_i$) value was higher as replacement ratio of fly ash (FA) increased. This result means that larger amount of FA is need to deliver one unit of a given performance indicator (1 MPa of strength) of FRCCs compared to that of ordinary portland cement (OPC). As a result, it could be concluded that FRCCs with W/B 45% replaced by FA 25% and recycled sand (RS) 25% is desirable for both target performance and $CO_2$ emission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1285-1290
• /
• 2017

We prepared ITZO thin films with various thicknesses on glass substrates using RF magnetron sputtering and investigated electrical, optical and structural properties of the thin film. Sheet resistance of ITZO thin film showed a decreasing trend on the increase of film thickness, but its resistivity exhibited a substantially constant value of $5.06{\pm}1.23{\times}10^{-4}{\Omega}-cm$. Transmittance of ITZO thin film moved to the long-wavelength with the increase of film thickness. Figure of merit in a visible light and an absorption area of P3HT:PCBM organic active layer of the 360nm-thick IZTO thin film was $8.21{\times}10^{-3}{\Omega}^{-1}$ and $9.29{\times}10^{-3}{\Omega}^{-1}$, respectively. Through XRD and AFM measurements, it was confirmed that all the ITZO thin films have amorphous structure and the surface roughness of films are very smooth in the range of 0.561 to 0.263 nm. In this study, it was found that amorphous ITZO thin film is a very promising material for organic solar cell.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.394-400
• /
• 2014

In this study, we fabricated ITZO thin films on glass substrates with various RF power from 30 to 60W and investigated the electrical, optical and structural properties. ITZO thin film deposited at 50W exhibited the largest figure of merit ($10.52{\times}10^{-3}{\Omega}^{-1}$) and then its resistivity and sheet resistance were $3.08{\times}10^{-4}{\Omega}-cm$ and $11.41{\Omega}/sq.$, respectively. As results of optical characterization, average transmittance of all ITZO thin films were over 80%. ITZO thin films had amorphous structure regardless of the RF power. The FESEM and AFM results showed that all ITZO thin films have a very smooth surface having no cracks and defects and the film deposited at 50W exhibit the smallest surface roughness of 0.254nm. We found that a amorphous ITZO thin film is a very promising material for replacing ITO in the next display device such as OLED.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.451-451
• /
• 2014

중고온 열전재료로서의 응용 가능성이 높은 HMS (higher manganese silicide)는 높은 제백계수, 낮은 전기저항, 높은 산화 저항성뿐만 아니라 구성 원소가 풍부하며 친환경적인 열전재료이다. HMS는 주로 용해/응고법, 단결정 성장법에 의해 합성되지만, 구조적인 불균질성 및 많은 합성 에너지를 소비하는 단점이 있다. 또한 진성 HMS는 비교적 낮은 열전특성을 나타내기 때문에 도핑에 의한 열전특성의 개선이 필요하다. 본 연구에서는 HMS의 한 종류인 MnSi1.73에 Cr을 도핑한 화합물 MnSi1.73:Crx (x=0, 0.005, 0.01, 0.02, 0.03)를 고상반응(solid state reaction)과 진공 열간압축성형(hot pressing)을 통해 제조하였다. XRD와 Rietveld refinement를 통해 상변화 및 상분율을 분석하였고, 323~823 K까지 전기적 및 열적 특성을 측정하여 열전 성능지수(ZT)를 평가하였다.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.516-527
• /
• 2009

We assessed fish fauna and habitat suitability indexes in the Geum river basin. Field monitoring was conducted for ecological and habitat condition assessment at 23 sites from October 2007 to March 2009. The habitat suitability indexes established for dominant fish species using the monitoring data were employed to assess riverine health conditions such as composition ratio of fish species, richness and dominance indexes, bio-diversity(dominance index, diversity, evenness and richness), and water depth, velocity and substrate size. Twenty-one species(42%) including Rhodeus uyekii and Pseudopungtungia nigra were found endemic out of the 50 species in 11 families sampled during this study period. The most frequently found one was Zacco platypus(34.3%) followed by Z. koreanus(10.2%) and Coreoleuciscus splendidus(8.4%). For Z. platypus, the dominant fish species in the basin, the favored habitat conditions were estimated to be 0.1~0.9 m for water depth, 0~0.9m/s for flow velocity and silt(<0.1mm)~cobbles(100.0~300.0mm) for substrate size, respectively. Overall, it was concluded that the Geum river basin has been relatively well protected from the anthropogenic disturbance for the legally protected species including the endemic species studied in this study.

• Composites Research
• /
• v.23 no.6
• /
• pp.47-54
• /
• 2010

Thermal vibration characteristics of a thin walled composite beam attached on spacecraft are investigated in this paper. The composite beam is assumed to have a thin CUS(circumferentially uniform stiffness) wall and modeled with several composite materials which are already space qualified such as T300/Epoxy, YS90AEpoxy. Steady state angle and peak to peak error in spacecraft attitude angle and tip displacement of composite beams are evaluated as a performance index for thermal vibration characteristics. Evaluation results shows that composite beam made out of YS90A has nearly 2 times better than T300 in terms of peak to peak attitude error angle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.565-575
• /
• 2011

The purpose of this study was to quantitatively evaluate the expression of both multi-metric qualitative habitat evaluation index (QHEI) and biological integrity index (IBI) for artificial structures eco-artificial fish reef (EAFR) for fishes asylum and habitat. Especially, both experimental evaluation and biological verification were performed in Water and Environmental Center's outdoor test-bed of Korea Institute of Construction Technology located in Andong-city, Gyeongsangbuk-do. The experimental conditions reflecting the situation of domestic river include the flow rate (e.g., $0.0{\sim}1.5m\;s^{-1}$), the width (e.g., 1.0~3.0 m), the depth (e.g., 0.05~0.70 m), and variable bed materials. Both QHEI and IBI were monitored for 8 months from May to December 2010. Whereas QHEI values were highest at experimental points of the E~F with an average of 83.1, those were lowest at B~C with an average of 78.1. However, QHEI values inside EAFR were more than 98.9, regardelss of space and time, and indicated more than the highest good of the state (Good) in the habitat. Overally, IBI values showed similar trend with QHEI, but were 44.2 in the winter dry season, compared to 32.8 of QHEI values. IBI values Also, IBI values inside EAFR were greater than those at the experimental channel by 5.7 to 11.4% and 18.7 to 34.8% in flow and stagnant conditions, respectively, indicating that EAFR can secure asylum and habitat for fish during the dry season. For comprehensive aquatic ecosystem assessment, the experimental channel showed generally fair conditions (Fair~Good), whereas EAFR showed good conditions (Good), suggesting that EAFR can be applied to aquatic ecosystem restoration and improvement.

• Fire Science and Engineering
• /
• v.15 no.3
• /
• pp.7-13
• /
• 2001

In this paper, we had analyzed comsbustion gases according to pyrolysis $600^{\circ}c$, $800^{\circ}c$ and $1000^{\circ}c$ for polymeric material using a GASTEC colorimetric gas detector tube in order to combustion gases toxicity evaluation for flame retardant untreated ply wood, flame retardant treated ply wood, flexible polyvinyl chloride and flexible polyurethane foam of polymeric material. As a result, comsbustion gases producted from small specimens of polymeric material had reached fatal to man at a 30 minute exposure time that had possesed toxicity index. Toxicity index at pyrolysis $800^{\circ}c$ of flexible polyvinyl chloride was 31.74. Flexible polyvinyl chloride was the highest toxicity index of flame retardant untreated ply wood, flame retardant treated ply wood, flexible polyvinyl chloride and flexible polyurethane foam. The comsbustion gases producted commonly no concern with pyrolysis temperature had analyzed carbon dioxide($CO_2$) and carbon monoxide(CO). Toxicity index had investigated differently according to pyrolysis temperature even a similar materal.

• Fire Science and Engineering
• /
• v.20 no.2 s.62
• /
• pp.1-7
• /
• 2006

The aim of the research is to estimate the effect of smoke and combustion gases on humane body indirectly through measuring the toxicity of those. For this purpose, the toxic index of smoke and combustion gases was investigated by smoke hazard test and analysis of smoke which were conducted by KS F 2271 and NES 713 method respectively. It i s proved by KS F 2271 method that PASCON trough is suitable to the testing standard of interior material and construction of building. In addition, it is identified by NES 713 method that combustion gases occurring in PASCON product were only carbon dioxide and carbon monoxide, and the smoke index of those was 0.944. This value means that the hazard effect of smoke gases on humane ! body can possibly happens when exposed to the smoke gases for more than 30 min. In aspect of the domestic situation that have not regulated the hazard estimation and the emissions of smoke when the flame retarding ability of the products have been requested, the toxic indexes of PASCON products are comparatively low.

• Journal of Korea Water Resources Association
• /
• v.42 no.6
• /
• pp.481-491
• /
• 2009

In this study, a comprehensive field monitoring was conducted to understand habitat conditions of fish species in the upper Geum river. Based on the monitoring data, riverine health conditions such as composition ratio of fish species, richness and dominance indexes, bio-diversity (dominance index, diversity, evenness and richness), and index of biological integrity were assessed, and optimal ecological flowrates were estimated using the habitat suitability indexes established for three fish species Coreoleuciscus splendidus, Zacco platypus and Pseudopungtungia nigra selected as icon species using the physical habitat simulation system (PHABSIM). The total number of species sampled was 20 species, and two sensitive species of C. splendidus (22.4%) and Z. platypus (22.0%) dominated the fish community. The estimated IBI values ranged from 34 to 42 with average being 38 out of 50, rendering the site ecologically fair to good health conditions. An optimal ecological flowrate of 9.0 cms was recommended for the representative fish species at the site.