• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.369-378
• /
• 2003

This paper presents design and VLSI implementations of a reassembly processor for ATM/AAL. The assembly processor is responsible for processing ATM cells from the receive physical interface. It controls the transfer of the AAL payload to host memory and performs all necessary SAR and CPCS checks. We propose the improved structure of cell identification algorithm and smart scatter method for host memory management. The proposed cell identification algorithm quickly locates the appropriate reassembly VC table based on the received VPI./VCI channel value in the ATM header. The cell identification algorithm also allow complete freedom in assignment of VCI/VPI values. The reassembly processor uses a smart scatter method to write cell payload data to host memory. It maintains the scatter operation and controls the incoming DMA block during scatter DMA to host memory. The proposed reassembly processor can perform reassembly checks on AAL. OAM cell. For an AAL5 connection, only CPCS checks, including the CRC32, are performed. In this paper, we proposed a practical reassembly architecture. The design of reassembly processor has become feasible using 0.6${\mu}{\textrm}{m}$ CMOS gate array technology.

• Journal of the Korean Chemical Society
• /
• v.46 no.2
• /
• pp.125-138
• /
• 2002

The kiln at Chollanamdo Kwangjusi Ch'unghyodong, which produced punch'ong and white wares for a period of 70 to 80 years in the 15th century, is examined for their scientific technological param-eters. Punch'ong sherds were divided into seven different groups according to the location and the layer of the waste mounds from which they were excavated. Optical and scanning electron microscope were used for microstructural observations and X-ray diffraction and polarized microscope for mineral characteristics. For determining the firing temperature, sherds were refired at different temperatures and their micro-structural changes were observed. Some wares such as the group CHE2 was high quality wares fired at high emperature around 1200$^{\circ}C$ for palace use, but as the ceramics ware became more widely used and the white wares increasingly preferred over punch'ong, lower quality wares of rougher raw materials were firedat lower temperatures around 1100-1150$^{\circ}C$ in quantity. They used local raw materials of several types, all available locally.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.21-21
• /
• 2010

천연기념물 제395호 진주 가진리 새발자국과 공룡발자국 화석산지는 1997년 5월 20일, 경남과학교육원 신축 공사장에서 당시 경남과학고등학교 교사로 근무하던 백광석(현재 서상중고등학교 교장)에 의해 최초로 발견되어, 수 백 점의 새발자국 화석과 공룡발자국 화석들이 학계에 알려지게 되었다. 지금까지도 세계 여러나라의 중생대 새 발자국 중에서 가장 밀도가 높은 화석산지로 손꼽히고 있으며 많은 학자들의 관심을 받고 있다. 이곳의 지질은 백악기 하양층군 함안층 하부의 적색 이암 또는 셰일과 사암의 호층으로 구성되어 있고, 새발자국 화석들은 적색 이암에서 발견된다. 현재, 이 화석산지는 경남과학교육원 건물 내부에 위치하고 있으며, '화석문화재전시관'이라는 명칭으로 보호 및 관리되고 있기때문에 자연재해와 풍화에 의한 침식을 1차적으로 막고 있다. 이 화석산지는 우리나라에서는 천연기념물 제394호 해남 우항리 화석산지와 함께 현장을 그대로 보존하면서 화석의 보존과 관리를 동시에 할 수 있는 건물을 지어 자연사교육을 진행할 수 있는 곳으로 많은 학생들을 대상으로 우리나라의 소중한 화석을 직접 관찰하고 학습하는 체험교육이 가능하다. 원격조종카메라 시스템을 활용하여 관람객이 직접 자신이 원하는 발자국 화석을 세부적으로 관찰할 수 있게 장치한 interactive system은 과학교육 효과를 증진시킨다. 선행 연구에 의하면, 본 화석산지에서 익룡의 발자국 화석(KS 071)도 공룡이나 새발자국과 같은 층리면에서 서로 겹쳐서 나타난다고 보고되었으나, 본 연구에 의해 다시 조사된 결과 전형적인 익룡의 발자국 화석에서 보이는 분명한 특징들을 발견할 수 없었다. 물갈퀴를 가진 새발자국 가운데에서 Uhangrichnus chuni 와 Jindongornipes kimi 로 기재된 표본들에 대하여서도 새롭게 분석하였다. Uhangrichnus chuni로 기재된 많은 표본들은 II-IV번 발가락 사이의 각, 물갈퀴의 형태, 뚜렷한 hallux 등의 형태적 특징을 근거로 할 때, 대부분이 Ignotorinis yangi로 판단된다. Jindongornipes kimi로 기재된 표본들은 이미 기재된 표본보다 크기가 적어도 10%-25%가 작으며, II-IV번 발가락 사이의 각에서 차이를 보인다.

• Journal of Korea Game Society
• /
• v.16 no.4
• /
• pp.25-34
• /
• 2016

Recent stealth games are mainly action games with frontal confrontation or combat features. In this paper, we designed and implemented an stealth game, where characters are weak person and play is conducted by avoiding the situation, not by frontal confrontation. We chose the light as the key factor for the avoidance. The players can survive and fulfill the missions by blocking the enemy's vision. After implementing the first version, we found that the game using only the avoidance is not as fun as expected. To make the game more interesting, we added limited attack function, provided mini map for better user interface, and this paper describes the options we had and experiences of the decision making process to make the better game.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.57-65
• /
• 1990

Newly developed LiF(Mg, Cu, Na, Si) thermoluminescence phosphors sealed in a plastic capsules (32mm dia., 0.9mm wall thickness) were used for in-phantom dosimetry of $^{60}Co$ $\gamma$-irradiation. The absorbed doses in water were determined by applying the general cavity theory to the absorbed dose in TLD cavity, which was computed from exposure. The absorbed doses at various sites in the water-phantom were measured by LiF(Mg, Cu, Na, Si) TLD and compared with doses obtained by the ionization method. Both results were consistent within the experimental fluctuation$({\pm}3%)$ Central axis percentage depth doses and phantom-air ratios measured by LiF(Mg. Cu, Na, Si) TLD showed good agreement with the published values[Br. J. Radiology, Suppl. 17(1983)].

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.336-342
• /
• 2007

Industrial HMI(Human Machine Interface) system is the main element among the factory automation processes and have been used to monitor and control operation and status of machine in factory with PLC. This HMI often brings heavy loads to the system development and difficult decreasing the system because it tends to use a specific system per each manufacturer. Therefore, in this thesis, we have developed an embedded linux-based embedded industrial HMI software modules which can be used for touch panel embedded system to solve these problem. In this module, we have used the Qt/Embedded software component because it can be used by all systems which support C++ compiler without modifying the existing codes. We can design more flexible system and network configuration because we have used the wireless communication module. In this thesis, we implement linux-based HMI software modules which are capable of wireless communication as well as bringing the mobility to the overall system and finally decreasing the system development loads by using the general purpose OS with competitive price.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2636-2641
• /
• 2010

To support anti-collision between ship to ship and sea-search and sea-rescue work, ship automatic identification system(AIS) that can both send and receive messages between ship and VTS Traffic control have been adopted. And port control system can control traffic vessel service which is co-operated with AIS. For more efficient traffic vessel service, ship recognition and display system is required to cooperated with AIS. In this paper, we propose ship detection system which is co-operated with AIS by using background estimation based on image processing for on the sea or harbor image extracted from camera. We experiment with on the sea or harbor image extracted from real-time input image from camera. By computer simulation and real world test, the proposed system show more effective to ship monitoring.

• Management & Information Systems Review
• /
• v.32 no.3
• /
• pp.247-261
• /
• 2013

Recently, the smart phone, a carrying along terminal connection technology such as Galaxytap/iPad etc. evolves, and supply is increasing rapidly, is included for smart phone because various sensor technologies are developed and service application that is acted in terminal with this is accompanied and grow. Continuously 4 generation to 3 Gs, Wibro Wireless network technology of communications a LTE technology from that is constructed, environment for Ubiquitous realization is being constructed fast. Therefore, in this paper it can inquire state of electronic, furniture devices through apartment complex web server and gear that control groove network at smart phone, and control, and confirms home state prevention of crimes state, and video inquiry of position that CCTV is placed in apartment complex was available. And it proposed integrated smart apartment with parking system and medical system using RFID system in ubiquitous environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.1-7
• /
• 2008

FlexRay is a new standard of network communication system which provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for future automotive applications. FlexRay communication controller (CC) is the core of the FlexRay protocol specification. In this paper, we first design the FlexRay CC protocol specification and function parts using SDL (Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay CC system was synthesized using Samsung $0.35\;{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 80 MHz. In addition, to show the validity of the designed FlexRay system the FlexRay system is combined with sound source localization system in Robot applications. The combined system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.535-540
• /
• 2015

A microstrip gas chamber (MSGC), applied to digital radiography system, was designed and constructed. The microstrip electrodes were fabricated with Chrome(Cr.). by photolithography process on Silicon(Si) wafer and glass substrate. The width of anode and cathode electrodes was $10{\mu}m$, and $290{\mu}m$, respectively. The distance of the electrodes was $100{\mu}m$, and the active area was $50{\times}50mm^2$. And the number of anode was 80. The microstrip electrodes were damaged when discharges occurred over the 600 V of anode voltage. As the result of experiments. It detected the typical output signals of the pulse width, 20 ns, under the condition that the detecting gas was Ar(90%) + $CH_4$(10%), X-ray tube voltage was 42 kV, and tube current was 1 mA.