• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.167-186
• /
• 2002

The encryption of a file on a PC before saving can maintain security of the file. However, if the key for the encrypted file is lost or damaged, the encrypted file can not be decrypted, resulting in serious economical loss to the user or the user group. In order to minimize the economical loss a secure and reliable key recovery technology is required. Presented in this paper is the development and evaluation of PKRS (PC based Key Recovery System) which supports encryption and decryption of file and recovery of the encrypted file in emergency. The encapsulating method, which attaches key recovery information to encrypted file, is applied to the PKRS. In addition, the PKRS is developed and evaluated according to the requirements of Requirements for Key Recovery Products proposed by NIST and requirements of Common Criteria 2.0 to prove the safety and reliability of the information security system. This system is applicable to a PC and can be further extended to internet or intranet environment information system where in encryption and recovery of file is possible.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1515-1521
• /
• 2007

In this paper, a unified regenerative inverter system for railway with DC line voltage simulator is proposed. In order to determine the operation characteristics of the regenerative inverter, the DC line voltage simulator is proposed. The DC line voltage simulator, which is based on the AC-DC PWM converter, varies the DC voltage according to the fluctuating voltage which is measured in the actual DC line. The suitable operating point of the regenerative inverter can be estimated from the simulation result. The regenerative inverter operates two modes. When the DC line voltage exceed the operating point, already set up, it works as regenerative inverter to return the excessive power of DC line to the grid. When the DC line voltage is under the operating point, it works as active power filter to compensate harmonic currents. In this paper, the control algorithm of the DC line voltage simulator and that of the regenerative inverter is proposed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1473-1478
• /
• 2007

In the respect of energy saving and reusing, it is necessary to reduce greenhouse gases emission and to enhance the operation efficiency in electric railway system. Recently, as the power electronics technologies are advanced, some countries have focused on the regenerative inverter to use regeneration energy on each line. When the electric tractions are stopped or slowed down, it is useful to supply the surplus energy to the power source by regenerative system, which increases its energy efficiency. Also, the generated energy can be supply to other tractions or equipments inside traction. Thus, it may help reduce construction cost of additional power plants. The purpose of this study is to describe the development status of the regenerative inverter system which suppress extra DC-line voltage and regenerate the energy instead of using a resister.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.19-21
• /
• 2006

In contrast with DC source, Fell cell has non linear characteristics that has lange voltage fluctuation due to load variation, and slow dynamic characteristics. when the loads are increase, the ripples of input and output voltage, also power densities, of inductor, capacitor, and switching devices, are bulky. This paper presents Interleaved boost converter using Fuel cell stacks, proposed converter has merits to promote power densities without increasing loss. Because each converter has same switching frequency and constant phase difference. In this paper, Interleaved boost converter was design for 1[kW], it's validity was proved by simulation and experiments.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.515-518
• /
• 2002

A synchronous generator is equipped with an automatic voltage regulator(AVR), which is responsible for keeping the output voltage constant under normal operating conditions at various levels. The output voltage of Synchronous Generator is regulated constantly by field voltage control in excitation system. High frequency PWM converter (Buck converter) type excitation system for synchronous generator that can sustain prefer output voltage level even at the fault condition happened. The proper operation of the proposed excitation system was verified through the simulations and the experiments.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.981-986
• /
• 2003

Recently, a fuel cell is remarkable for new generation system. The fuel cell generation system converts the chemical energy of a fuel directly into electrical energy. The fuel cell generation is characterized by low voltage and high current. For connecting to utility, it needs both a step up converter and an inverter. The step up converter makes DC link and the inverter changes D.C to A.C. In this paper, full bridge converter and the single phase inverter are designed and installed for fuel cell. Simulation and experiment verify that fuel cell generation system could be applied for the distributed generation.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.99-103
• /
• 2003

Recently, a fuel cell with low voltage and high current of electronic output characteristics is remarkable for new generation system. It needs both a dc-dc boost converter and do-ac inverter to be used in domestic power. Therefore, this paper presents do-dc boost converter with ZVS for fuel cell generation system This topology has several advantages, which are ZVS characteristics of all of main and auxiliary switches, reduction of reactor component size because of high frequency switching, and low rated voltage stress of the switches. In this paper, theoretical analysis, operation principle, and design procedures are presented. And simulation results from Pspice are presented to validate the theoretical analysis.

• Transactions of Materials Processing
• /
• v.19 no.4
• /
• pp.248-252
• /
• 2010

In this paper, three-dimensional finite element analysis of thread rolling process of a 12 point flange head bolt is conducted using a rigid-plastic finite element method based metal forming simulator AFDEX 3D. A whole sequence of cold forming processes of a long shaft bolt composed of four forging stages and final thread rolling process is simulated to reveal the mechanism of thread formation. A mesh density control function is applied near the major plastic deformation region to achieve computational efficiency. It has been shown both numerically and experimentally that longitudinal lengthening or shortening is negligible in thread rolling.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.126-132
• /
• 1999

Accordance to being quickly in spread of internet, the colleges must be required the construction of internet and intranet environment. But, many colleges do not construct most suitable intranet model or manage integrated information system which costs a great deal. Therefore. in this paper, we inspect a based technology for the construction of intranet, define to stepwise the construction procedure used for these technologies, and propose the construction model to fit with the characteristics of college.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.96-101
• /
• 2000

Today, we live in the generation of the information and internet. For progressing the life quality of peoples and the competition of nation. we need new policy for constructing the health and welfare information system. In this study, we inspect and analyze for the information of health and welfare, and suggest the system model for the health and welfare information system(HWIS) on the web-environment, and suggest the database model for managing the information application.