• Title/Summary/Keyword: 잔류 AM

Search Result 18, Processing Time 0.03 seconds

A Performance Analysis of AM-SCS-MMA Adaptive Equalization Algorithm based on the Minimum Disturbance Technique (Minimum Disturbance 기법을 적용한 AM-SCS-MMA 적응 등화 알고리즘의 성능 해석)

  • Lim, Seung-Gag
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.16 no.3
    • /
    • pp.81-87
    • /
    • 2016
  • This paper analysis the AM-SCS-MMA (Adaptive Modulus-Soft Constraint Satisfaction-MMA) based on the adaptive modulus and minimus-disturbance technique in order to improve the stability and robustness in low signal to noise power of current MMA adaptive equalization algorithm. In AM-SCS-MMA, it updates the filter coefficient applying the adaptive modulus and minimum-disturbance technique of deterministic optimization problem instead of LMS or gradient descend algorithm for obtain the minimize the cost function of adaptive equalization. It is possible to improve the equalizer filter stability, robustness to the various noise characteristic and simultaneous reducing the intersymbol interference due to the amplitude and phase distortion occurred at channel. The computer simulation were performed for confirming the improved performance of SCS-MMA. For these, the output signal constellation of equalizer, residual isi, MSE, EMSE (Excess MSE) which means the channel traking capability and SER which means the robustness were applied. As a result of computer simulation, the AM-SCS-MMA have slow convergence time and less residual quantities after steady state, more good robustness in the poor signal to noise ratio, but poor in channel tracking capabilities was confirmed than MMA.

Performance Improvement of SMMA Adaptive Equalization Algorithm using Adaptive Modulus in QAM Signal (QAM 신호에서 Adaptive Modulus를 이용한 SMMA 적응 등화 알고리즘의 성능 개선)

  • Lim, Seung-Gag
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.16 no.1
    • /
    • pp.115-120
    • /
    • 2016
  • This paper deals with AM-SMMA (Adaptive Modulus-SMMA) adaptive equalization algorithm that is possible to improves the equalization performance using adaptive modulus which is propotional to the output signal power of equalizer in the current SMMA algorithm. The fixed statistic modulus of transmitted QAM signal is used in current SMMA algorithm in order to generate the error signal for updating the tap coefficient of equalizer. The adaptive modulus which is propotion to the equalizer output signal power is used in the proposed AM-SMMA. The computer simulation was performed in order to confirm the improved equalization performance of proposed algorithm. The performance index includes the output signal constellation, the residual isi and maximum distortion that is for the convergence characteristics, the SER. As a result of computer simulation, the residual isi, maximum distortion are better in the small weighting values. But in SER performance is better in the large weighting values.

A Performance Improvement of NM-MMA Adaptive Equalization Algorithm using Adaptive Modulus (Adaptive Modulus를 이용한 NM-MMA 적응 등화 알고리즘의 성능 개선)

  • Lim, Seung-Gag
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.18 no.6
    • /
    • pp.113-119
    • /
    • 2018
  • This paper relates the AM-NM-MMA algorithm which possible to adaptive equalization performance improvement using the adaptive modulus instead of fixed modulus in the NM-MMA algorithm. The NM-MMA emerged for the tradeoff the MMA and SE-MMA algorithm characteristics, the MMA provides the less residual values in the steady state and have a slow convergence rate, the SE-MMA provides the fast convergence rate and increae the risidual values in the steady state. But the fixed modulus can not give the zero residual values in the perfect equalization state and eqaulization performance were degrade, the adaptive modulus was applied in order to reducing the residual values, and its improved performance were confirmed by simulation. For this, the equalizer output constellation, residual isi, MD, MSE, SER were used for performance index. As a result of computer simulation, the AM-NM-MMA has more good performance in equalizer output signal constellation, residual isi, MD, MSE than the NM-MMA, but not in SER performance.

Effects of Stability and Volume Fraction of Retained Austenite on the Tensile Properties for Q&P and AM Steels (Q&P와 AM강의 잔류오스테나이트 분율과 안정도에 따른 인장특성 거동)

  • Byun, Sang-Ho;Oh, Chang-Suk;Nam, Dae-Geun;Kim, Young-Seok;Kang, Nam-Hyun;Cho, Kyung-Mox
    • Korean Journal of Materials Research
    • /
    • v.19 no.6
    • /
    • pp.305-312
    • /
    • 2009
  • The effects of Quenching and Partitioning (Q&P) and Annealed Martensite (AM) heat treatment on the microstructure and tensile properties were investigated for 0.24C-0.5Si-1.5Mn-1Al steels. The Q&P steels were annealed at a single phase ($\gamma$) or a dual phase (${\gamma}+{\alpha}$), followed by quenching to a temperature between $M_s$ and $M_f$. Then, enriching carbon was conducted to stabilize the austenite through the partitioning, followed by water quenching. The AM steels were intercritically annealed at a dual phase (${\gamma}+{\alpha}$) temperature and austempered at $M_s$ and $M_s{\pm}50^{\circ}C$, followed by cooling in oil quenching. The dual phase Q&P steels showed lower tensile strength and yieldyield strength than those of the single phase Q&P steels, and tThe elongation for the dual phase Q&P steel was partitioning 100s higher than that of that for the single phase Q&P steels as the partitioning time was less than 100s up to partitioning 100s. For AM steels, the tensile/yield strength decreased and the total elongation increased as the austempering temperature increased. The stability of the retained austenite controlled the elongation for Q&P steels and the volume fraction of the retained austenite controlled the elongation for AM steels.

Residues of ampicillin in blood of cultured olive flounder by oral, injection and dipping administration (Ampicillin의 경구, 주사 및 약욕 투약에 따른 넙치 혈액에서의 잔류량 변화)

  • Jung, Sung Hee;Seo, Jung Soo;Park, Myoung Ae
    • Journal of fish pathology
    • /
    • v.25 no.3
    • /
    • pp.211-219
    • /
    • 2012
  • The residue levels of ampicillin (AM) in cultured olive flounder, Paralichthys olivaceus (average 300g) at $20{\pm}1.0^{\circ}C$ were studied by oral, intramuscular and dipping administration (routes). The concentrations of AM in the plasma were determined by HPLC-UV detector. The average recoveries of AM in spiked samples between 0.01~10 ppm were ranging from 84.45% to 91.26% for plasma. The limit of detection for AM was 0.05 ppm by using this method. Plasma concentrations of AM were determined after oral dosage (10, 20 and 40 mg/kg body weight), intramuscular injection (5, 10 and 20 mg/kg body weight) and dipping (10, 20 and 40 ppm; 1 h). Samples were taken at 1, 3, 5, 10, 15, 24, 30, 48, 96, 144, 216, 264 and 360 h post-administration. In oral dosage of 10, 20 and 40 mg/kg, it's peak concentrations were $3.62{\pm}0.97$, $5.20{\pm}0.70$ and $11.18{\pm}0.87{\mu}g/ml$, respectively at 10 h post-administration, but AM was not measurable at 144, 360 and 360 h post-administration, respectively. In intramuscular injection of 5, 10 and 20 mg/kg, it's peak concentrations were $6.92{\pm}1.29{\mu}g/m1$, $9.89{\pm}2.22{\mu}g/ml$ and $19.85{\pm}2.97{\mu}g/ml$, respectively at 5 h post-administration, but AM was not measurable at 216, 264 and 264 h post-administration, respectively. In dipping of 10, 20 and 40 ppm, it's peak concentrations were $4.39{\pm}1.10$, $9.57{\pm}1.51$ and $11.61{\pm}1.92{\mu}g/ml$, respectively at 3 h post-administration, but AM was not measurable at 264, 264 and 360 h post-administration, respectively. Therefore, the plasma distribution and elimination levels of AM in olive flounder were dosage-dependant manner in all administration routes.

Review on additive manufacturing of dental materials (치과용 재료의 적층가공에 대한 문헌고찰)

  • Won, Sun;Kang, Hyeon-Goo;Ko, Kyung-Ho;Huh, Yoon-Hyuk;Park, Chan-Jin;Cho, Lee-Ra
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.37 no.1
    • /
    • pp.1-15
    • /
    • 2021
  • Additive manufacturing (AM) for dental materials can produce more complex forms than conventional manufacturing methods. Compared to milling processing, AM consumes less equipment and materials, making sustainability an advantage. AM can be categorized into 7 types. Polymers made by vat polymerization are the most suitable material for AM due to superior mechanical properties and internal fit compared to conventional self-polymerizing methods. However, polymers are mainly used as provisional restoration due to their relatively low mechanical strength. Metal AM uses powder bed fusion methods and has higher fracture toughness and density than castings, but has higher residual stress, which requires research on post-processing methods to remove them. AM for ceramic use vat polymerization of materials mixed with ceramic powder and resin polymer. The ceramic materials for AM needs complex post-processing such as debinding of polymer and sintering. The low mechanical strength and volumetric accuracy of the products made by AM must be improved to be commercialized. AM requires more research to find the most suitable fabrication process conditions, as the mechanical properties and surface of any material will vary depending on the processing condition.

Analytical Method of Bentazone Residue in Agricultural Commodities Using HPLC-UVD/MS (HPLC-UVD/MS를 이용한 농산물 중 bentazone의 분석법 확립)

  • Kim, Young-Hak;Lee, Su-Jin;Song, Lee-Seul;Hwang, Young-Sun;Lee, Young-Deuk;Choung, Myoung-Gun
    • The Korean Journal of Pesticide Science
    • /
    • v.15 no.2
    • /
    • pp.149-159
    • /
    • 2011
  • Bentazone is benzothiadiazole group herbicide, and used to foliage treatment. This herbicide have already been widely used for cereals and vegetables planting in worldwide. This experiment was conducted to establish a determination method for bentazone residue in crops using HPLC-UVD/MS. Bentazone residue was extracted with acetone (adjusted pH 1 with phosphoric acid) from representative samples of five raw products which comprised hulled rice, soybean, apple, green pepper, and Chinese cabbage. The extract was diluted with saline water, and dichloromethane partition was followed to recover bentazone from the aqueous phase. Florisil column chromatography was additionally employed for final clean up of the extract. The bentazone was quantitated by HPLC with UVD, using a YMC ODS AM 303 ($4.6{\times}250$ mm) column. The crops were fortified with bentazone at 3 levels per crop. Mean recovery ratio were ranged from 82.0% for a 0.2 mg/kg in apple to 97.9% for a 0.02 mg/kg in Chinese cabbage. The coefficients of variation were ranged from 0.5% for a 0.02 mg/kg in soybean to 9.7% for a 0.02 mg/kg in Chinese cabbage. Quantitative limit of bentazone was 0.02 mg/kg in representative five crop samples. A LC/MS with selected-ion monitoring was also provided to confirm the suspected residue. Therefore, this analytical method was reproducible and sensitive enough to determine the residue of bentazone in agricultural commodities.

Thermal Annealing Effect on the Machining Damage for the Single Crystalline Silicon (단결정 실리콘의 기계적 손상에 대한 열처리 효과)

  • 정상훈;정성민;오한석;이홍림
    • Journal of the Korean Ceramic Society
    • /
    • v.40 no.8
    • /
    • pp.770-776
    • /
    • 2003
  • #140 mesh and #600 mesh wheels were adopted to grind (111) and (100) oriented single crystalline silicon wafer and the grinding induced change of the surface integrity was investigated. For this purpose, microroughness, residual stress and phase transformation were analyzed for the ground surface. Microroughness was analyzed using AFM (Atomic Force Microscope) and crystal structure was analyzed using micro-Raman spectroscopy. The residual stress and phase transformation were also analyzed after thermal annealing in the air. As a result, microroughness of (111) wafer was larger than that of (100) wafer after grinding. It was observed using Raman spectrum that the silicon was transformed from diamond cubic Si-I to Si-III(body centered tetragonal) or Si-XII(rhombohedral). Residual stress relaxation was also shown in cavities which were produced after grinding. The thermal annealing was effective for the recovery of the silicon phase to the original phase and the residual stress relaxation.

Changes of Volatile Flavor Components in Garlic-Seasoning Oil (마늘 풍미유의 휘발성 향기 성분의 변화)

  • Koo, Bon-Soon;Ahn, Myung-Soo;Lee, Ki-Young
    • Korean Journal of Food Science and Technology
    • /
    • v.26 no.5
    • /
    • pp.520-525
    • /
    • 1994
  • This study was carried on the garlic-seasoning oil production by autoclaving method and evaporating method in order to research a developed method. The raw, flake, extract states of garlic was added 40%(w/w) of total amounts to corn salad oil. All samples treated with various conditions analyzed the volatile flavor components(VFC) during incubating ($40{\pm}2^{\circ}C$) and heating ($185{\pm}2^{\circ}C$). In the garlicseasoning oils, the contents of propane, pentane, methyl allyl trisulfide and diallyl trisulfide as the major VFC were decreased while the contents of propenal and hexanal increased according to the storage and heat treatment. The order of flavor contents among garlic states were raw>extract>flake, but flavor stability were raw>flake>extract states during storage, while flake>raw>extract states in heat treatment. VFC in garlic-seasoning oil made by evaporating method were about 66.1% level of those made by autoclaving method, but the changing tendency of their content during storage and heat treatment were shown to be similar. According to those results, autoclaving method and evaporating method were thought to the rational method in preparation of garlic-seasoning oil.

  • PDF

A Cathode Ripple Resolution Method on 600W SHF TWTA for Satellite Communications (위성통신용 600W급 SHF대역 진행파관 증폭기 캐소드 리플 특성 개선방안)

  • Hong, In-Pyo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.1A
    • /
    • pp.48-57
    • /
    • 2006
  • TWTA is to perform the function that amplifies the input RF signal and outputs it to the antenna. This paper proposes a method that is to improve the cathode ripple or the SHF TWTA for satellite communications. Through the embodiment and experiment of 600W SHF TWTA, this method satisfies the design specifications. Also, RF performance is improved by reducing the noise of auxiliary power sources supplied to the RF part and eliminating the unexpected noise. Therefore, this method is very effective and can be used to develop the similar equipments.