• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.33-42
• /
• 2009

A polymer-based flexible neural probe was fabricated for monitoring of neural activities from a brain. To improve the insertion stiffness, a 5 ${\mu}m$ thick biocompatible Au layer was electroplated between the top and bottom polymer layers. The developed neural probe penetrated a gel whose elastic modulus is similar to that of a live brain tissue without any fracture, To minimize mechanical residual stress and bending from the probe, two new methods were employed: (1) use of a thermal annealing process after completing the device and (2) incorporation of multiple different layers to compensate the residual stress between top and bottom layers. Mechanical bending around the probe tip was clearly removed after employing the two processes. In electrical test, the developed probe showed a proper impedance value to record neural signals from a brain and the result remained the same for 72 hours. In simple in-vitro probe characterization, the probe showed a great removal of residual stress and an excellent recording performance. The in-vitro recording results did not change even after 1 week, suggesting that this electrode has the potential for great recording from neuron firing and long-term implant performance.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.198-201
• /
• 2001

In-situ flushing의 적용에 따른 농도 저감이 생물학적 분해에 미치는 영향을 알아보기 위하여, 초기농도 13mg/kg dry soil과 3mg/kg dry soil인 토양을 생물학적으로 처리한 결과 제거효율은 각각 86% 및 81%였으며, 두 가지 토양 모두 24시간 이후에는 미생물에 의한 작용이 크지 않은 것으로 나타났다. 이것은 토양상에서 용액상으로의 미생물에 의한 작용이 크지 않은 것으로 나타났다. 이것은 토양상에서 용액상으로의 물질전이 속도가 율속 단계로 작용하고 있기 때문이라 생각된다. 토양에 잔류하는 계면활성제가 생물학적 분해에 미치는 영향을 본 결과, 잔류하는 계면활성제에 의해 물질전이 속도가 향상되어 생분해가 지속적으로 일어났으며 초기농도 3mg/kg dry soil인 경우 120시간이 경과한 후 89%의 제거효율을 나타내었다. 계면활성제와 보조용매가 동시에 잔류하는 경우에는 계면활성제에 대한 순응기간이 보다 길어지는 것을 알 수 있었으며, 메탄올과 에탄올의 경우 각각 84%의 제거효율을 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.247-247
• /
• 2011

차단기의 주 임무는 사고전류를 차단하는 것이다. 진공 인터럽터는 진공차단기의 차단부로서 진공차단기의 핵심부이다. 사고전류 발생시 전극이 분리되면서 아크가 발생한다. VI의 아크소호 방식에는 크게 축자계 방식과 횡자계 방식이 있는데 본 논문은 횡자계 방식에 관한 것이다. 교류전류에서는 전류가 일시적으로 공급되지 않는 전류영전에서 아크소호가 가능하다. 전류영점에서 아크가 소호된 직후 극간저항은 거의 0에서부터 무한대까지 급격하게 변화하는데 이때 이 저항의 증가에 비례하여 과도회복전압이 발생한다. 하지만 잔류플라즈마의 소멸에는 일정시간이 소요되며 아크가 소호된 이후에도 종종 극간에 금속증기가 존재하게 된다. 잔류플라즈마는 전기전도도를 가지므로 극간에 과도회복전압이 걸리면 전류영점 직후에 아크를 통해 흘러 결국 아크의 재점호를 야기시키는 post arc current를 발생시킬 수 있다. 따라서 전류영점의 충분한 시간 이전에 아크를 확산아크로 전환시켜 극간에 존재하는 잔류 플라즈마 량을 최소화시켜야 한다. VI 내부의 아크거동에 미치는 인자에는 접점재료와 VI 용기내부의 진공도 이외에도 전극의 직경, 쉴드, 전극의 개극속도, 최종 극간거리 등이 있다. 본 연구에서는 나선형 VI 접점을 대상으로 두 접점 사이의 비틀림 각도에 따른 아크제어성능을 비교분석하였다.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.43-49
• /
• 2017

BACKGROUND: Greenhouse crops are one of agricultural products consumed largely in Korea. Cucumber is a typical example as main vegetables of greenhouse crops. Thus, pesticide residue analysis is an important requirement to guarantee pesticide safety of cucumber. This work was aim to investigate the residues of penthiopyrad and pyriofenone in cucumber after harvest. METHODS AND RESULTS: Cucumber was subjected to treat with penthiopyrad and pyriofenone at a level of recommended dose 0, 1, 2, 3, 5, 7 and 10 days before harvest under greenhouse conditions. The samples were extracted with organic solvent by using a homogenizer and purified on solid phase cartridge column followed by LC-MS/MS analysis. The recovery levels of penthiopyrad and pyriofenoneranged from approximately 81 to 93% with the method limit of 0.005 mg/kg and coefficient of variation less than 10%. Penthiopyrad and pyriofenone were detected at a level less than maximum residue limit in cucumber at 10 days before. The half-lives of penthiopyrad and pyriofenone were determined to 2.4 ~ 2.6 days. CONCLUSION: Penthiopyrad and pyriofenone are suggested to use in cucumber 10 days before harvest to reach their levels less than maximum residue limit.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.633-636
• /
• 2005

Imprint lithography is a promising method for high-resolution and high-throughput lithography using low-cost equipment. As with other nanoimprint methods, ultraviolet-nanoimprint lithography (UV-NIL) resolution appears to be limited only by template resolution, and offers a significant cost of ownership reduction when compared to other next generation lithography (NGL) methods such as EUVL and 157 nm lithography. The purpose of this paper is to suggest optimum values of control parameters of Imprio 100 manufactured by Molecular Imprint, Inc., which is the first commercially available UV-NIL tool, for sound nanoimprint. UV-NIL experiments were performed on Imprio 100 to find dispensing recipe for avoiding air entrapment. Dispensing recipe related to residual layer thickness and uniformity was optimized and 40 nm thick residual layer was achieved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.253-253
• /
• 2013

본 실험에서는 전구체(Precursor)로 TMA (Tris methyl Aluminum)를 사용한 ALD (Atomic Layer Deposition)와 PEALD (Plasma Enhanced Atomic Layer Deposition) 공정 중 발생하는 입자(particle)를 ISPM (In-Situ Particle Mornitor)로 관찰하였다. ALD과 PEALD 공정에서 Al2O3 박막을 형성하기 위해서 반응가스(Reactant)로 각 각 H2O와 O2 plasma를 사용하였다. 이러한 차이로 인해서 진공 챔버(Vacuum Chamber) 안에서의 각기 다른 매커니즘에 의해서 Al2O3의 박막이 형성된다. 또한 공정 중 발생할 수 있는 파티클(Particle) 생성 매커니즘의 차이점을 가진다. ALD의 경우 전구체와 반응가스 사이에 충분한 purge가 이루어지지 않거나 dead zone이 존재할 경우 라인과 챔버 상에 잔류한 전구체와 반응가스에 의해서 불완전한 반응물로 파티클이 생성될 수 있다. 반면 PEALD 경우는 반응가스(Reactant)로 O2 plasma를 극부(localization)적으로 형성하여 박막을 형성하므로 반응가스의 잔류의 영향은 없으나 고에너지의 플라즈마에 의해서 물리적 영향에 의한 파티클이 생성될 수 있다. 공정 중 발생하는 입자(Particle)은 수율 감소와 박막의 물성에 영향을 미칠 수 있다. 그러므로 두 공정 중 발생하는 파티클을 ISPM으로 관찰하였고, 각 공정에서 형성된 박막의 두께 균일도, 표면의 형상(morphology), 화학적 조성 및 전기적 특성을 측정하였다. 이를 통해서 ALD와 PEALD의 파티클과 박막특성을 비교하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.387-395
• /
• 2013

Recently, several circumferential cracks were found in the control rod drive mechanism (CRDM) nozzles of U.S. nuclear power plants. According to the accident analyses, coolant leaks were caused by primary water stress corrosion cracking (PWSCC). The tensile residual stresses caused by welding, corrosion sensitive materials, and boric acid solution cause PWSCC. Therefore, an exact estimation of the residual stress is important for reliable operation. In this study, finite element simulations were conducted to investigate the effects of the tube geometry (thickness and radius) on the residual stresses in a J-groove weld for different CRDM tube locations. Two different tube locations were considered (center-hole and steepest side hill tube), and the tube radius and thickness variables ($r_o/t$=2, 3, 4) included two different reference values ($r_o$=51.6, t=16.9mm).

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.970-977
• /
• 1999

Effect of Mo interlayer on the relaxation of residual stress in AlN/Cu pint bonded by active-metal brazing method was investigated. The stress analyses by finite-element-method, the measurement of pint strength and the observation of fracture surface were carried out and their results were compared with each other. From the results of stress analysis it is confirmed that a Mo interlayer led to a shift of maximum stress concentration site from AlN/insert-metal interface$\rightarro$ insert-metal/Mo$\rightarro$Mo interlayer. Additionally, with increase of the Mo interlayer thickness the stress concentration with tensile component was separately built both at the interface of Cu/Mo and AlN/Mo. whereby the residual stress in the free surface of AlN close to the bonded interface was drastically reduced. The AlN/Mo/Cu pints with Mo interlayer thickness of above 400$\mu\textrm{m}$ showed the strengths higher than 200 MPa. upto max. 275 MPa, while the AlN/Cu pint only max. 52 MPa.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.57-62
• /
• 2017

BACKGROUND: Pesticide residue analysis is essentially required for safety evaluation of agricultural products. Bistrifluron and chlorantraniliprole have been currently considered as potentials to deeply evaluate their residues in agricultural products because they are frequently found in strawberry. This work was performed to investigate the residual patterns of bistrifluron and chlorantraniliprole in strawberry after harvest. METHODS AND RESULTS: Strawberry was treated with bistrifluron and chlorantraniliprole 0, 1, 2, 3, 5, 7 and 10 days before harvest under greenhouse conditions. The strawberry samples were subjected to solvent and solid phase extractions followed by LC-MS/MS analysis. There covery percentages of bistrifluron and chlorantraniliprole for tified in the control samples ranged from approximately 82 to 103% with the method limit of 0.005 mg/kg. The concentrations of bistrifluron and chlorantraniliprole in strawberry samples decreased significantly in 10 days after treatment, giving the safety levels of 0.04 to 0.06 mg/kg at 10 days after application, as considered maximum residue limit. The half-lives of bistrifluron and chlorantraniliprole based on first order kinetics were determined to 6.3 days and 6.4 days, respectively. CONCLUSION: Bistrifluron and chlorantraniliprole are suggested to use in strawberry 10 days before harvest to reach residual safety levels.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.495-502
• /
• 2013

This work was performed to investigate proper condition of coagulation treatment as UF process pretreatment that consider UF permeate flux and residual Al concentration. The coagulant used an alum as $Al_2(SO_4)_3{\cdot}16H_2O$ and PACl (r = 1.5) made this study. The experiment was tested in adjusting conditions such as alum dose, flocculation time and coagulation pH of seawater. Consequently, higher coagulant dose lead to elevation of UF permeate flux while residual aluminium also increased in condition of pH 8.0. The most suitable condition which has a good permeate flux and low residual aluminium, in this works, was coagulant dose of 0.7 mg/L (as Al, alum) and 1.2 mg/L (as Al, PACl) and coagulation pH 6.5. In addition, applying the flocculation time with 1.2 mg/L of PACI reduced. The flocculation time reduced UF permeate flux in using alum.