• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.487-492
• /
• 2007

최근 잦은 기상이변으로 인한 자연재해는 그 빈도와 강도가 점차 증가하고 있다. 이러한 기상이변은 결국, 극단적인 가뭄이 닥칠 가능성이 농후할 것이고, 만일 극단적인 가뭄상황이 도래할 경우 제한급수 또는 절수로 인한 일반인이 느끼는 피해정도는 매우 늘어날 것이다. 본 연구는 가뭄상황시 제한급수를 고려한 소비자의 지불의사를 알아보고자, 7대 특 광역시와 32개 가뭄상습지역에 거주하는 일반인을 대상으로 생활용수 수요패턴과 가뭄상황을 고려한 생활용수의 가치를 추정하였다. 조사결과, 수돗물 수질 관련에 대해서는 가뭄상습지역보다 7대광역시가 더 민감하였고, 수돗물 수량에 대해서는 가뭄상습지역이 더 민감한 것으로 나타났다, 지불의사 추정은 양분선택형과 개방형을 혼합하여 지불의사액을 설문하였고, Tobit모형을 이용하여 지불의사액을 추정하였다. 추정결과, 교육수준이 높을 수록, 가구수가 많을수록, 소득이 높을수록 지불의사가 높은 것으로 나타났다. 또한, 가뭄으로 인해 생활용수의 25% 제한시에는 약 2010원, 50% 제한시에는 2,395원의 추가적인 지불의사가 있는 것으로 추정되었다. 결국, 조사가구의 평균 수돗물 사용량과 절감량등을 추정하여 계산한 결과, 생활용수 25% 제한시 $1m^3$당 추가적인 지불의사 금액은 약 534원으로 추정된다. 지불의사가 기대했던 것보다 낮은 이유는 소비자가 그 정도의 가뭄을 경험하지 못한데서 오는 조세저항으로 여겨진다. 그러나 이 같은 결과는 가뭄을 회피하기 위해 소비자가 기꺼이 지불할 수 있는 비용은 현재의 물 값보다 훨씬 높다는 것을 의미한다. 알 수 있었다.수 없는 실제 방사선작업 환경에서의 선량평가 수행시, 본 논문에서 제시한 선량평가방법을 적용할 경우 계획된 피폭과 예상하지 못한 방사선장에 대한 피폭을 구분할 수 있어 보다 심도 있는 피폭선량평가 및 방사선관리가 가능할 것으로 판단된다.황산기(黃酸基)의 함량은 가장 적었다내고 있었고, in vivo에서는 복강(復腔)(i. p.) 투여(投與)에서는 $12.9{\sim}22.2%$. 경구(經口)(p.o.) 투여(投與)에서는 $11.2{\sim}21.6%$의 높은 활성(活性)을 나타내고 있었다. 단 peroxidase 활성(活性)은 복강(復腔)(i. p.) 투여(投與)에서는 $129.0{\sim}188.6%$, 경구(經口)(p. o.) 투여(投與)에서는 $111.4{\sim}139.6%$의 활성(活性)을 나타내고 있었다.rucic acid를 다량함유(多量含有)하고 있는 목포단교 12는 다른 두 품종(品種)에 비(比)하여 장쇄지방산에 속하는 eicoseuoic acid가 11.7%로 많이 함유(含有)되어 있었다. 그리고 3품종(品種) 모두 중성지질(中性脂質) 획분(劃分)의 지질(脂質)은 전체지방산(全體脂肪酸) 조성(組成)의 비(比)와 별다른 차이(差異)를 나타내지 않았다.수 있으나 본원에서 사용 중인 장비에서 극히 적은 MU의 사용이 현저한 선량적 오차를 유발하진 않는 것으로 사료되어진다. 그러나 정도 관리 시 그 오차를 확인하는 과정은 장비의 사용과 수명에 따라 지속적으로 관리되어져야 할 것이다.>로 평균

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.393-400
• /
• 2014

"Master Plan of Cadastral Resurvey Project" aims to put the governmental budget of 1.3 trillion Won into the cadastral resurvey project until 2030 that reflects the preliminary feasibility study, conducted by government at 2012. The cadastral Resurvey, which takes 78.8% of the expenses in the project, has to take an critical role for earning the most effective results from the project. The cadastral confirmation surveying take up almost 13% of the project and is controlled under the areal SOC(Social Overhead Capital) projects in current "Master Plan of Cadastral Resurvey Project". Also, the affiliations of cadastral resurvey and linear SOC projects are expected to bring advanced results, although those are excluded from cadastral confirmation surveying. For linear SOC projects, the land division survey is conducted by using boundary stakes in boundary survey, while the cadastral resurvey is conducted within the SOC project area, after the completion of the project. In this study, we could conclude that cadastral resurvey results with the world geodetic system from boundary survey at the point of land division could be produced without the duplication of land division and cadastral resurvey. As a result, the expected benefits are 73,877 parcels and 4,078 million won, annually.

• Archives of design research
• /
• v.16 no.1
• /
• pp.35-44
• /
• 2003

In the past era, acquisition and utilization of useful information was the main origin of competition. Nowadays, unlike that era, is the era of knowledge information(management) in which we should create a new knowledge on the basis of information and apply it to the field of practice. And more acquisition of information is no more the competitive power of any person, any company and any nation because in such the era of knowledge management, anyone can access and get the information he needs, utilizing internet-based searching system. Such demands of the times of knowledge management change rapidly in each field through knowledge management system and researches about knowledge management are actively processed in various academic branches. However, in our field of design, researches about those demands(knowledge management) still remain on the level of one-dimensional searching service for general data about design. Therefore, in this study, we developed building database of researches on form, color, aesthetical elements, preference image word, satisfaction etc. about CI/BI of home electronics goods, living goods, apparels, and food goods companies, also suggesting searching system through which you can obtain useful data and information helpful for designers to process CI/BI works of new product by using that database. Especially, in case of developing specific CI/BI, various search results through help of suggested system will supply a useful design concept. And more, cross table which is the result of analysis two-dimensional categorical data about existing design factors(such as form, color, aesthetical elements, preference image word, and satisfaction) will make contribution for designers to create a new design knowledge.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.29-39
• /
• 2005

For detecting a ground contamination survey, soil sampling method have been used a drilling or coring technique in general. However these methods are very difficult to systematically real-time monitoring of variation of contamination degree in field. ]'n this research frequency Domain Reflectometry (FDR) system was suggested and carried out to experimental approaches for determination of oil contamination on surface and underground. Experimental method using FDR method was discussed with feasibility of measurement in the laboratory column test. It is determined to degree of oil contamination due to response of dielectric constant re-lated with volumetric water content(θ/sub w/) and volumetric oil content( θ/sub al/ ) of saturated and unsaturated soil media. And physical properties such as effective porosity and oil residual ratio of saturated soil media were also measured through real-time monitoring works using installed FDR measurement sensors, which are defected characteristics of oil movement in the saturated soil media under the soil column tests. In the results of these experiments, a range of effective porosity was estimated to about 0.35 compared with initial porosity 0.40 of manufactured saturated soil media, which is also calculated to about 87.5% to the ratio of initial porosity to effective porosity. Finally oil residual ratio which is compared with volumetric water content and volumetric oil content was calculated about 62.5%.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.22-27
• /
• 1997

특정 제품이 가진 "감성 이미지"란 그 제품의기능과 함께 제품의 감각적 요소 그리고 사용자가 제품에 대해 가진 개념적인 사고 과정의 산물이다. 감성이미지의 국제 비교 연구는 사용자가 특정 제품에 대해 가지고 있는 이미지를 국가나 문화의 맥락 속에서 상호 비교 평가하여, 각 국가나 사회집단을 특팅지울 수 있는 문화적 감성 요소를 추출하고자 하는 것이다. 즉, 각 국가의 생활문화 속에서 사용자들이 제품에 대해 가지는 감성이미지를 계량적으로 규명하고 비교 평가하며, 이 정보를 기초로 각국의 문화와 정서에 적합한 제품 디자인의 모형을 제시하는데 본 연구의 목적이 있다. 구체적인 연구방법은 우선, 자동차 제품을 중심으로 '제품 이미지'를 나타내는 '언어 이미지'스케일을 각 문화 집단 별로 구성한다. 이 제품 이미지에 대비하여, 감성적 요소로 선정된 표준 색채 스케일을 중심으로 나타난 집단의 '이미지'를 상호 비교 평가한다. 이 경우, 각 국가별 집단에서 특징적으로 나타나는 제품의 주요 특성이 감성 이미지로 표현되는 색채 이미지에 어떻게 반영되는가를 상호 비교한다. 이 연구에서는 특정 지역의 사람들이 제품에 적용하는 감성이미지는 색채나 기타 감성 요소에 대한 선호의 문제가 아니라 그 집단의 사람들이 그 제품을 통해 표현하고자 하는 사회적 표상의 반영이라는 것을 보여준다. 따라서, 제품의 이미지가 각 국가별로 공유되는 감성 이미지로 변환되기 위해서는 동일한 의미나 상징성을 지닌 감성 요소를 활용하여 그 제품의 이미지를 포장할 수 있는 방법을 적용하는것이다. 본 연구에서는 각 문화 집단들이 특정 제품에 대해 가지고 있는 사회적 표상(social representation) 체계를 색채스케일에서 나타난 감성 이미지를 통해 구체화하는 것이다.로서는 방전효율의 저하가 없는 양호한 성능을 보였으며, SC의 시범 작동시험을 실차(소나타 1800cc)에 장착하여 수행한 결과 20회 이상의 연속시동에서도 아무런 문제점 없이 잘 동작하였다.되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the le

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.306-313
• /
• 2017

This study systemically analyzed the data on the microbial levels in fresh vegetables in Korea to identify the points to control. We scanned the studies published between 2001 and 2015 in peer-reviewed research papers on the microbial levels in fresh vegetables produced in Korea. Plant products were categorized by using the US IFSAC (Interagency Food Safety Analytics Collaboration) category. The most consumed, the non-heat treated, the epidemiological foodborne diseases sources of fresh vegetable in foodservice (KCDC data) were identified by literature review. Articles were screened using National Digital Science Library (NDSL) search engine regarding to microbial hazards in plant products. Based on the total plate count number and coliforms on the 89 data cases from 26 published articles, the total plate count number was high in the order of sprouts, leaf and stem, bulbs and roots, vine-grown, solanaceous, melons, and pome. Escherichia coli was frequently detected in leaf and stem and sprouts products. Focused on the microbial data of leek, lettuce and cabbage, the levels of total plate count, coliforms and Bacillus cereus showed the levels of 4.15~7.69 log CFU/g, 1~6.99 log CFU/g, and 0.51~3.9 log CFU/g, respectively, by 33 published papers. The levels of environmental factors affecting the microbial safety of lettuce and leek before harvest were investigated. Manure, soil, hands, scale, gloves were the major potential microbial contamination points to control. In addition, GAP (good agricultural practice), microbial testing, and improvement of irrigation methods are required to provide the safer fresh produce.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.485-492
• /
• 2012

Today, a digital airborne imaging sensor plays an important role in construction of the numerous National Spatial Data Infrastructure. However, an appropriate quality assesment procedure for the acquired digital images should be preceded to make them useful data with high precision and reliability. A lot of studies therefore have been conducted in attempt to assess quality of digital images at home and abroad. In this regard, many test fields have been already established and operated to calibrate digital photogrammetric airborne imaging systems in Europe and America. These test fields contain not only GCPs(Ground Control Points) to test geometric performance of a digital camera but also various types of targets to evaluate its spatial and radiometric resolution. The purpose of this paper is to present a method to verify the spatial resolution of the Intergraph DMC digital camera and its results based on an experimental field testing. In field test, a simple bar target to be easily identified in image is used to check the spatial resolution. Images, theoretically designed to 12cm GSD(Ground Sample Distance), were used to calculate the actual resolution for all sub-images and virtual images in flight direction as well as in cross flight direction. The results showed that the actual image resolution was about 0.6cm worse than theoretically expected resolution. In addition, the greatest difference of 1.5cm between them was found in the image of block edge.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.10
• /
• pp.520-529
• /
• 2005

A feature-based 3D modeling algorithm is presented in this paper. Since conventional methods use depth-based techniques, they need much time for the image matching to extract depth information. Even feature-based methods have less computation load than that of depth-based ones, the calculation of modeling error about whole pixels within a triangle is needed in feature-based algorithms. It also increase the computation time. Therefore, the proposed algorithm consists of three phases, which are an initial 3D model generation, model evaluation, and model refinement phases, in order to acquire an efficient 3D model. Intensity gradients and incremental Delaunay triangulation are used in the Initial model generation. In this phase, a morphological edge operator is adopted for a fast edge filtering, and the incremental Delaunay triangulation is modified to decrease the computation time by avoiding the calculation errors of whole pixels and selecting a vertex at the near of the centroid within the previous triangle. After the model generation, sparse vertices are matched, then the faces are evaluated with the size, approximation error, and disparity fluctuation of the face in evaluation stage. Thereafter, the faces which have a large error are selectively refined into smaller faces. Experimental results showed that the proposed algorithm could acquire an adaptive model with less modeling errors for both smooth and abrupt areas and could remarkably reduce the model acquisition time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.51-60
• /
• 2011

In this study, structural safety capacity analysis of the overpass railway bridge between Konkuk Univ. and Guui station railroad has been performed. The overpass is expected to have suffered durability reduction by deterioration. The weight reduction of the overpass has been implemented to prevent further durability reduction and to improve performance capacity. To reduce the weight, 3 procedures of replacing concrete soundproofing wall to light-weight soundproofing wall, replacing gravel ballast to concrete ballast, and reducing the weight of trough have been performed. The analysis of static/dynamic behaviors and improved capacity of the light-weighted overpass bridge has been performed. The structural safety verification of the improved structure has been implemented by using rating factors of load carrying capacity of PSC I girder. The results have shown that the deflection has been reduced by 2.6mm and tensile strength has been improved by 1.07MPa, which indicate that the structural capacity has effectively been improved. Also, the natural frequency has improved by approximately 30% where vibration reduction and dynamic behavior improvement have been achieved. Moreover, in the rating factor evaluation based on analysis and test results, an improvement from 1.82 to 1.93 has been observed. Therefore, weight reduction method for the overpass is effective considering overall results.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.45-51
• /
• 2004

Control stations managed by national and local governmes are associated with other survey work and constructing geography information and they are important assets in the national level as the positional standard of the country. Since these control points are managed as some type of register and the control points could not be easily updated due to the loss of control stations from construction work or urban development. Therefore, the users could not understand the present situation of the changed control stations. In this background, the aim of this study was to develop control station management system which the managers can use to efficiently maintain control points and to support the usage of the survey control points. For developing this system, we have designed input, update, network, analysis and statistic functions, and have constructed the system using Mapobject as main engine with other languages such as Visual C++ and Visual Basic. The graphic data used in this system are 1/5,000 digital map and digital cadastral map, and the attribute data of each control station are point name, map tile name, longitude and latitude coordinates, TM coordinates, surveying data with the format of year-month-day and control situation photos and so on. In the result of constructing this control station management system, we could achieve integrated management of graphic, attribute and positioning information of each control station.