• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.89-99
• /
• 2020

This study analyzed the load and the consumed power characteristics of a potato harvesting operation in a dry field. The potato harvesting operation was performed using an underground crop harvester mounted on an agricultural tractor with a rated engine power of 23.7 kW. The rotational speeds and the torque of the engine output shaft, rear axle, and power take-off (PTO) shaft were measured under various working conditions. The load spectrum and the consumed power were analyzed using the measured data. The results show that the consumed power of the rear axle increased as the working speed increased, while that of the PTO shaft decreased. The consumed power of the engine output shaft showed a similar trend with that of the PTO shaft, but the torque deviation was larger in the load spectrum. The results of previous studies were used to compare herein the consumed power and the load characteristics of the harvesting, rotary, and plow operations in a dry field. PTO and tractive power were highly consumed in the plow and rotary operations, respectively. The consumed power of the PTO shaft and the rear axle in the harvesting operation were 29-41% and 18-23% of the engine power, respectively. Compared to those in the rotary and plow operations, the engine power was relatively evenly distributed to the PTO shaft and rear axle in the harvesting operation.

• Journal of Korean Medical classics
• /
• v.19 no.2 s.33
• /
• pp.163-178
• /
• 2006

향의약학영향료직접효력적의약정책급위료관철적양정책입적의약조직기구화각충의약사병제도등(向?約學影向了直接效歷的?約政策及危了關鐵的洋政策立的?約組織紀柩和各忠?約事?制度等), 도시현대의정관리화약정관리체계적구성부분(都是現代?政管理和約政管理?系的柩成部分). 의정관리화약정관리도보건복지적중요구성부분(?政管理和約政管理都保健福祉的重要柩成部分). 의정화약정책명사개념자동근현대개시사용적(?政和約政策名?槪念自洞近現代開始使用的), 불과본논문상언급적개념도시왕조사회적내용(不過本?文上言及的槪念都是王朝社會的內容). 진관왕조사회몰용의정화약정저명사개념(進管王朝社會沒用?政和約政這名?槪念). 단시여현대적의정화약정개념차불다일양(但是?現代的?政和約政槪念差不多一洋). 유이본논문상용현대적‘의정’개념개전연구(由而本?文上用現代的‘?政’槪念開展硏究), 관우재왕조사회상의정병기영향의학발전(?于在王朝社會上?政幷基影響?學發展). 논자최근화중국양준교수합작병진행관우자종진한시대도청조적의정사공동연구(?者最近和中國梁畯敎授合作幷進行?于自種秦漢時代到淸朝的?政史共同硏究), 파타당작기근향후한의학유관적아국정책급교육(把?當作基根向后韓?學有?的我國政策及敎育), 보건행정등방면상(保健行政等方面上), 반망활용이참고자료(盼望活用以參考資料). 본몬문시저반연구작업제일두서(本論文是疽般硏究作業第一斗緖), 지우자종형성중국최초통일국가적진조도한조적의정사(至于自種形成中國最初統一國家的秦朝到漢朝的?政史), 진한적정책개요(秦漢的政策槪要), 진한의약정책(秦漢?約政策), 관우의정기구진한의관제도적작용(?于?政肌柩秦漢?官制度的作用), 진한의약정책화의약발전관계(秦漢?約政策和?約發展?系), 진한의정평가화형성원인등분성오개방면후(秦漢?政?伽和形成原因等分成五介方面后), 진행연구병정리보고기결과(進行硏究幷整理報告基結果).

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.133-146
• /
• 2001

In a dynamic load distribution policies, each node gathers the current system sates information before making a decision on load balancing. Load balancing policies based on this strategy can suffer from processor thrashing. In this paper, we propose a new algorithm which attempts to decrease the frequency of the processor thrashing, the algorithm is based on the integration of three components. The first, the algorithm of which determine the size of jobs be transferred. The second, negotiation protocol with obtains a mutual agreement between a sender and a receiver on the transferring job size. And the third, a symmetrically-initiated location policy. The algorithm proposed in this paper used Siman IV as simulation tool to prove the improvement of performance. I analyzed the result of simulation, and compared with related works. The mean response time shows that there are no difference with existing policy, but appear a outstanding improvement in high load. The thrashing coefficient that shows the average response time, CPU overhead and the thrashing ratio at both the receiving and sending node has been used in the analysis. A significant improvement in the average response time and the CPU overhead ratio was detected using our algorithm when an overhead occurred in the system over other algorithm. The thrashing coefficient differed in the sending node and the receiving node of the system. Using our algorithm, the thrashing coefficient at the sending node showed more improvement when there was an overhead in the system, proving to be more useful. Therefore, it can be concluded that the thrashing ratio can be reduce by properly setting the maximum and minimum value of the system’s threshold queue.

• Therapeutic Science for Rehabilitation
• /
• v.4 no.1
• /
• pp.19-28
• /
• 2015

Introduction : The Understanding of neurological lesion relating to apraxia will help to predict symptoms according to a lesion and to establish a proper treatment and goal. So, This study will explain causes and mechanism of a movement error of ideomotor apraxia through literature review and also will suggest the evidence using in treatment. Body : Ideomotor apraxia may occur a damage of the production part in praxis system, and is common in damage of a cortex rater than damage of a subcortex. According to study with gesture, movement of upper limbs is relate of left parietal lobe but finger movement is relate of frontal lobe. The visual and tactile stimulation through using real objects could guide into proper movement aside from memory of a skilled action. Conclusion : Praxis can occur through diverse neurological processing and various external stimulations can help praxis processing. Therefore, the treatment of ideomotor apraxia need to use this stimulations.

• Therapeutic Science for Rehabilitation
• /
• v.4 no.1
• /
• pp.29-38
• /
• 2015

Objective : The purpose of the study is to propose the treatment methods for problem of handwriting, micrographia in Parkinsons disease. Methods : For this purpose, foreign literatures on the subjects with Parkinsons disease was researched. Results : The results of this review is summarized as follows. The treatment methods for micrographia were applied to external cue and feedback among motor learning strategies in order to improve motor initiation. The external cues included visual, auditory, and verbal stimulations, and feedback strategy was visual stimulation. For writing with external cue or visual feedback, result in expanding the size of the letters in addition, writing task performance is maintained for a short period without those. Conclusion : Further studies are needed to examine the strategy maintained effect for long periods.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.250-260
• /
• 2020

The purpose of the present study was to explore the most effective body region and cooling temperature to alleviate heat strain of workers in hot environments. We developed liquid cooling hood, vest, sleeves and socks and applied the water temperatures of 10, 15, 20, and 25℃ through the liquid cooling garments in a hot and humid environment (33℃ air temperature and 70% RH air humidity). A healthy young male participated in a total of 16 experimental trials (four cooling garments × four cooling temperatures) with the following protocol: 10-min rest, 40-min exercise on a treadmill and 10-min recovery. The results showed that rectal temperature, mean skin temperature, and ratings of perceived exertion during exercise; heart rate and diastolic blood pressure during recovery; and total sweat rate were lower for the vest condition than other garment conditions(p < .05). However, there was no differences in mean skin temperature among the four cooling garments when we compared the values converted by covering area(%BSA). When we classified the results by cooling temperature, there were no consistent differences in thermoregulatory and cardiovascular responses among the four temperatures, but 25℃ water temperature was evaluated as being the most ineffective cooling temperature in terms of subjective responses. In conclusion, the results indicated that wearing cooling vest with < 20℃ cooling temperature can alleviate heat strain of workers in hot and humid environments. If the peripheral body regions are cooled with liquid cooling garments, larger cooling area with lower cooling temperature than 10℃ would be effective to reduce heat strain of workers. Further studies with a vaild number of subjects are required.

• Conservation Science in Museum
• /
• v.23
• /
• pp.31-48
• /
• 2020

Conservation treatment of stone cultural properties in the open air is mainly conducted by companies specialized in conservation treatment. This study presents cases of conservation treatment of stone cultural properties housed outdoors in Seoul, including the Three-story Stone Pagoda at Nakseongdae in Gwanak-gu. The present condition of and damage to stone cultural properties are investigated and the materials and techniques used for conservation treatment are presented. The contamination on the surface of stone cultural properties located in downtown areas shows features specific to the related areas, meaning each case requires tailored conservation techniques. This study is expected to serve as reference for future conservation treatment of stone cultural properties in Seoul as well as others in museum collections exhibited outdoors. It is hoped that the cases presented in this study can become widely known to people in charge of conservation treatment in the private and public sectors to improve the quality of conservation treatment applied to stone cultural properties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.30-30
• /
• 2018

스마트 도금공장을 구축하기 위해서는 도금액 내부의 화학 물질 농도 변화를 측정할 수 있는 화학 센서 기술이 필수적으로 요구된다. 와트욕은 대표적인 고속 니켈 도금액 중 하나로 기본적으로 황산니켈, 염화니켈, 보릭산의 염과 함께 케리어(type-1 광택제), 광택제(type 2-광택제), 응력 제어제 등의 유기 첨가제로 구성되어 있다. 이러한 유기 첨가제는 전차된 니켈층의 두께 균일도, 조도, 미세 구조, 내부 응력 등 다양한 특성을 제어하며, 정밀한 농도 관리가 필수적으로 요구되나, 분석 기술의 부재로 인하여 지금까지도 대부분의 액관리는 할셀법이나 작업자의 경험에 의존하고 있다. Cyclic voltammetry stripping(CVS) 방법은 전기화학 분석 과정에서 나타나는 첨가제의 가속, 감속 특성 등과 여기에 수반되는 stripping peak의 변화를 이용하여 개별 첨가제의 농도를 측정하는 방법이며, 지금까지 인쇄회로기판의 비아필 공정, 전해 동박 제조, 반도체 배선 등 구리도금 산업 전반에 걸쳐 첨가제 관리에 효과적으로 적용되고 있다. 그러나 수소 발생으로 인한 stripping 효율 문제로 인하여 니켈, 주석, 아연 등 표준 환원 전위가 높은 금속 도금액 내부 첨가제 농도 측정은 아직 어려운 상황이다. 본 연구에서는 이 문제를 극복하기 위해 염소를 과량 첨가한 구리 도금액을 CVS 분석의 base 용액으로 이용하여 니켈 도금액 내부 여러 광택제 (polyetylene glycol(PEG) 계열, thiourea 계열, 2-butyne-1,4-diol 등) 농도를 측정하는 법을 제시하였다. 제시된 방법은 CVS 분석 과정에서 구리-염소 사이의 상호 작용으로 인해 생성되는 3가지 stripping peak의 상대적인 크기 변화가 첨가제 농도에 따라 영향을 받는다는 사실에 기반하였다. 본 연구에서는 여기에 관한 원인에 대해 고찰하였으며, 제시된 방법을 통해 광택제 계열 첨가제 농도 측정을 선택적으로 할 수 있다는 것을 증명하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.616-626
• /
• 2007

In spatially multiplexed MIMO systems that enable high data rate transmission over wireless communication channels, the spatial demultiplexing at the receiver is a challenging task, and various demultiplexing methods have been developed recently by many researchers. Among the previous methods, maximum likelihood detection with QR decomposition and M-algorithm (QRM-MM)), and sphere decoding (SD) schemes have been reported to achieve a (near) maximum likelihood (ML) performance. In this paper, we propose a novel signal detection method that achieves a near ML performance in a computationally efficient manner. The proposed method is demonstrated via a set of computer simulations that the proposed method achieves a near ML performance while requiring a complexity that is comparable to that of the conventional MMSE-OSIC. We also show that the log likelihood ratio (LLR) values for all bits are obtained without additional calculation but as byproduct in the proposed detection method, while in the previous QRM-MLD, SD, additional computation is necessary after the hard decision for LLR calculation.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.310-313
• /
• 2016

In this paper, we propose the tester apparatus for 48 channel GM Tube sensor. The proposed apparatus can test up to 48 channel GM tube simultaneously to detect the defect and analyze the sensor characteristic. 300-1000V variable high voltage generation circuit is utilized for the apparatus suitable for the sensor characteristic. Thus, the proposed system is useful for various GM Tube sensor characteristic analysis. Multiple sensor testing environment is established for the early detection of the defect and the analysis to reduce the costs for manufacturing and rework. Developed 48 channel GM Tube sensor test is evaluated with certified testing equipment and shows excellent performance with respect to the uncertainty of the sensor test results.