• Convergence Security Journal
• /
• v.15 no.6_2
• /
• pp.55-63
• /
• 2015

Like a violence occurred by security guardians in the Yoosung or SJM Enterprise, a series of security company in Korea has repeated illegal conduct. So human rights violations are getting to be very heavy. The National Police Agency, the controller of the Security Services Industry Act, requires stricter regulations for the defense industry direction. here followed the research about some provisions in the Security Services Industry Act relating to 'the collective civil appeals spot' examining the contents of the Problems and discussed about it.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.201-207
• /
• 2001

Construction accidents are very serious comparing to its workers. These kind of accidents consist in the particularity of construction. The accident prevention task in construction requires both into immediate approach and longer range approach of instruction, training and education. Information concerning each individual accident, if the information of investigation has been done well, it provides information of prevention accident. At this point, this paper by examining 800 cases of serious accident researched by the Korea Occupational Safety and Health Agency from Jan. 1992 to Dec. 2000 specifically targeting apartment and building construction develops the construction information system to suggest the proper information of construction safety.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.108-112
• /
• 2005

유비쿼터스 컴퓨팅의 기반 설비인 센서 네트워크는 많은 수의 센서 노드들로 구성되며, 각 센서 노드의 하드웨어는 매우 작은 규모이다. 또한 센서 네트워크는 구축 목적에 따라 네트워크 토폴로지 및 라우팅 방식이 결정되어야 하고, 이와 더불어 센서 노드의 하드웨어와 소프트웨어도 필요에 따라 다양하게 변경되어야 한다. 따라서 센서 네트워크가 구현되기 전에 시스템 동작과 성능을 예측할 수 있는 센서 네트워크 시뮬레이터가 필요하다. 기존의 센서 네트워크 시뮬레이터들은 특별한 응용을 위한 특정 기반의 하드웨어와 운영체제에 국한되어 개발되었기 때문에 다양한 센서 네트워크 환경을 지원하기에는 한계가 있으며, 센서 네트워크 설계상의 주요 요소인 전력소모량과 실행 시간에 대한 분석이 포함되지 않았다. 따라서 본 연구에서는 특정한 응용이나 운영체제에 제한을 받지 않으면서 다양하게 센서 네트워크 환경을 설계 및 검증할 수 있고, 더불어 전력소모량과 실행시간 추정도 가능한 시뮬레이터를 개발하는 것을 목표로 하였다. 이를 위해 본 연구에서 개발한 시뮬레이터는 기계명령어-레벨(machine instruction-level)의 이산-사건 시뮬레이션(discrete-event simulation) 기법을 이용함으로써 실제 센서 노드의 프로그램 실행 및 관련 동작들을 세부적으로 예측하는 데 사용될 수 있도록 하였다. 시뮬레이션의 작업부하(workload)인 명령어 트레이스(instruction trace)로는 ATmega128L 마이크로컨트롤러용으로 크로스 컴파일된 인텔 핵스-레코드(.hex) 형식을 사용한다.

• Journal of Korean Institute of Fire Investigation
• /
• v.4 no.1
• /
• pp.62-69
• /
• 2004

The purpose of this study on the sheath heater having high occurrence of fires in a small work place because of not having the safety device, was to find out the characteristics required in the field examination of the fires in the courses of investigation. The results of the experiments conducted and reviewed on the basis of the fire cases whose conditions of the ignition possibility were divided into A, E, C and D are as follows: When the sheath heater without safety device is left on the condition of the heat accumulation of which the temperature rapidly rise, and then ignite the inflammables of the surroundings. In such cases, it was characterized that the color change trace appeared even if no short trace was discovered in the power line.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.322-324
• /
• 2015

네트워크 시뮬레이터인 NS-2(Network Simulator 2)는 다양한 인터넷 프로토콜을 분석 할 수 있는 이산 사건 시뮬레이터로 데이터 처리량과 패킷 지연 및 전력 소모 등을 구할 수 있다. 그러나 NS-2를 사용하여 실험 시 네트워크 토폴로지의 설정이 변경 될 때마다 Tcl 스크립트를 통해 단일적으로 밖에 대응하지 못한다는 불편함이 존재한다. 이 문제를 해결하기 위해 본 논문에서는 멀티프로세싱 기법의 NS-2 Batch Job 시스템을 제안한다. 쉘(Bash) 스크립트로 NS-2 내부 구조의 간섭 없이 자동화 일괄 작업(Batch Job) 시스템을 모듈 구조로 구현 및 적용시켰다. 또한 실험의 시간 효율을 극대화시키기 위해 멀티프로세싱 기법을 이용하여, 하드웨어 성능의 부하가 걸리지 않는 선에서 NS-2 시뮬레이션을 다중 처리할 수 있도록 만들었다. 성능 비교분석 결과, 제안하는 Batch Job 시스템을 적용하면 기존에 NS-2를 이용한 실험에 걸리는 시간에 비해 소요시간이 평균 48% 감소한 결과를 볼 수 있다. 이는 하드웨어 성능이 향상된다면, 부하가 걸리지 않는 상한까지 더 많은 개수의 NS-2 프로세스를 실행시킬 수 있기 때문에 더욱 큰 시간 효율을 보여줄 수 있다.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.12-17
• /
• 1998

Fault tree construction for hazard assessment requires so much time and labor, so it is very difficult to be applied to the large scale chemical plant. For the synthesis of fault tree in chemical processes, this study represents the cause-effect relations between process variables by using the Signed Directed Graph(SDG), and has synthesized Fault Tree(FT) by searching the causes of fault events using the general operator and loop operators defined corresponding to path characteristics on the SDG.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.33-66
• /
• 2017

The Korean government enacted the Chapter 6 as of Air Transportation to the Korean Commercial Act, which was enforced in 2011, in order to treat some arguments occurred from air transportation Contracts since air transportations has rapidly increased in Korea. Air transportations has been used more in the field of international market than in the field of domestic market under it's own characteristic. Therefore, many international agreements and protocols related to the air transportations has been appeared from old times and the 1999 Convention for the Unification of Certain Rules for International Carriage by Air ("Montreal Convention") is one of them. The Montreal Convention was adopted in May 28, 1999 at International Conference of Air Law hosted by the International Civil Aviation Organization ("ICAO") in Montreal, Canada where the Headquarter of ICAO is located. The Montreal Convention has been effected from September 5, 2003 and the Korean government ratified the convention in 2007. Therefore, the Montreal Convention came in to force in Korea since 2007. This year, 2017, is the 10th anniversary year since the Montreal Convention has taken effect in Korea. However, there are rare cases that argued the Montreal Convention's scope of application and this Article examines the Korean Supreme Court's case that argued the Convention's scope of application. Thus the Article basically analyzes the case from the perspective of the Montreal Convention's scope of application and examines the Montreal Convention's articles related to the air carrier's liability and extent of compensation for damage that occurred from the international carriage by air. Also this Article analyzes the Korean Commercial Act Chapter 6, which regulated the air carrier's liability and the Article tries to make a comparison between the Montreal Convention and the Korean Commercial Act in order to draw some scheme for the betterment of Korean Commercial Act. It is the hope that the Article contribute to the improvement of Korean Commercial Act through the comparison with the chance of the 10th Anniversary of the Montreal Convention in Korea.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.277-284
• /
• 2009

Currently food-borne disease is being increased at outdoor food services including hotels and restaurants. Speedy and convenient practical monitoring techniques to determine hygienic conditions are needed. This study was designed to verify correlation of direct ATP (Adenosine Tri-Phosphate) examination method using ATP bioluminescence and surveillance with check-list by inspector. Hygienic status of personal hygiene (hands), kitchen utensils (knives, chopping boards, kitchen towels, cap openers, food storage containers, and blade of slice machines), facilities and equipments (refrigerator handles, worktables, and sinks) in five major hotels in Seoul were examined. The result of personal hygiene of hotels was relatively better than other inspection items (46.6 points in personal hygiene, 40.2 points in kitchen utensils, 40.3 points in facilities & equipments). In ATP inspection, kitchen utensils and facilities & equipments were relatively clean comparing with personal hands data ($40.8{\pm}6.77\;RLU/cm^2$). After correlation analysis of surveillance in hygienic status points and ATP value, all results showed negative and high correlation. The surveillance data and ATP results investigating personal hygiene, kitchen utensils and facilities & equipments were highly correlated. The ATP examination method which shows real-time identification could be considered as an appropriate method to alternate current check-list dependent safety management in food services including hotels.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.50-60
• /
• 2018

Recently, modular construction method has been widely applied to projects with repetitive processes including dormitory, the residential facility, and the hotel construction due to reduced labor input and shortened construction schedule. Generally, about 40% of total on-site construction cost excluding unit installation cost, is put on exterior finishing work, and thus management of finishing work is deemed important in maintaining the targeted schedule and cost. Since limited equipment is shared so that subsequent activities are not affected while carrying out on-site installation and finishing work, lifting plan becomes more important for modular projects with greater portion of finishing work load. In this regard, tower crane operation plan may take the form of a single cycle or multiple cycles in which equipment efficiency can be affected. However, difficulties exist in evaluating alternatives to tower crane operation plans supporting unit installation and finishing work. Therefore, this study aims to evaluate the alternative of tower crane operation method according to the cyclic period setting in modular building site to determine the effect on T/C uptime and process by parameterizing lifting time for unit and exterior finishing material, lift cycle for unit and exterior finishing material and time required for finishing work. Accordingly, this study develops a simulation model that can increase the tower crane efficiency by controlling the work speed. An academic contribution of this study is to suggest a resource leveling method applying the concept of lifting cycle, and further is expected to be managerially used as a basis for an alternative evaluation of equipment plan.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.231-248
• /
• 2019

The purpose of this study was to implement a cognitive stimulation activity program and examine its effects elderly people who is capable of daily life and community activities but suffering from per sistent cognitive decline on the elderly's cognitive function, self-efficacy, and depression. The purpose of this study was to help elderly people who is capable of daily life and community activities but suffering from persistent cognitive decline improve their ability to perform and adapt to activity-based tasks incorporating a variety of actions of different subdomains and difficulty levels, ac cording to their characteristics and cognitive levels. The aim of the program created was to systemati cally improve the subdomains of cognitive functions and eventually preventing these conditions develo ping into dementia in those affected. This study also enabled the subjects to improve their self-effica cy through newly gained positive perceptions and attitudes toward their own abilities by successfully expressing their experience or thoughts about circumstantially and relationally meaningful events and memories, and performing activities that promote sensory stimulations. The group activities conducted as part of the study helped the subjects reduce their symptoms of depression not only by expressing their thoughts and emotions, but also by encouraging empathy with, understanding of, and caring for others. Given that this study confirmed the potential of the cognitive stimulation program designed fo r it as a clinical intervention for elderly people with cognitive impairment, it is suggested as a useful preventive program for early stage dementia.