• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.44-52
• /
• 1993

선박에 있어서 철의장품은 종류와 수량이 다양하고 형상이 불규칙하여 대부분의 사업장에서 설계 전산화가 이루어지지 못하고 있는 실정이다. 의장설계실에서는 이를 전산화하기 위하여 먼저 철의장품의 표준을 제정 및 극대화하고 설계작업절차와 물량의 흐름을 전산과 연계하여 체계화 및 표준화하였다. 또한 선박의 전구역에 설치되는 철의장품들을 관련 양식과 함께 국제표준을 근거로 BASICA CADDS, SURFACE DESING, SDDP(structural Design ＆ Detailing Package) SOFTWARE를 이용하여 2차원(2-dimension) 및 3차원(3-dimension) 데이터베이스(database)화 하였으며 이를 POP-UP MENU를 이용, 쉽게 선택함으로써 모델링(modeling) 작업시수를 대폭 감소 시켰으며, 그래픽(graphic)에서 추출한 의장품의 데이터(data)를 의장품의 표준정보 FILE과 연계하여 라벨(LABEL) 및 치수(DIMENSION)를 기입하여 배치도를 추출하고 의장품의 제작, 설치, 계산 및 관리에 소요되는 설치도, 제작도 및 관련 보고서인 BOM(bill of material), PML(pallet material list), 의장제작품 LIST, COG(center of gravity), 관리점 등을 자동추출 및 관리전산망(PC-lan)과 연계할 수 있는 DECOM(철의장 전산설계 전용 package)을 89년에 개 발하여 의장설계에 적용하여 왔으며 ORACLE사의 RDBMS(relational database management system)를 도입하여 이를 보완하므로써 정보의 일관화 및 공유화가 가능하게 되었다. 그 결과 설계 M/H절감, 생산성 향상, 자재 및 관련 정보 전달에 혁신적인 변화 향상을 가져오게 되었다.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.91-103
• /
• 2008

In order to simulate the behavior of automated manufacturing systems, the performance of material handling systems should be measured dynamically. Multi-Agent technology could be well adapted for the development of simulator for distributed and intelligent manufacture systems. A multi-agent system is composed of one coordination agent and multiple application agents. Issues in AGVS simulator can be classified by the set-up and operating problems. Decisions on the number of vehicles, bi- or uni-directional guide-path, etc. are fallen into the set-up problem category, while deadlock tree algorithm and conflict resolution are in operating problem. In this paper, a multi-agent based deadlock-free simulator for automated guided vehicle system(AGVS) are proposed through the use of multi-agent technologies and the development of deadlock-free algorithm. In this AGVS simulator proposed, well-known Floyd algorithm is used to create AGVS Guide path, through which AGVS move. Also, AGVs avoid vehicle conflict and deadlock using check path algorithm. And Moving vehicle agents are operated in real-time control by coordination agent. AGV position is dynamically calculated based on the concept of rolling time horizon. Simulator receives and presents operating information of vehicle in AGVS Gaunt chart. The performance of the proposed algorithm and developed simulator based on multi-agent are validated through set of experiments.

• Journal of Animal Science and Technology
• /
• v.48 no.5
• /
• pp.663-670
• /
• 2006

The present study was performed to investigate the effect of plant type recombinant porcine somatotropin (pST) adminstration on growth performance and blood profile of finishing pigs. Forty-eight Landrace barrows weighing 78 kg were employed for six week growth trial. Twelve barrows were allocated into various rpST types ; the control (CONT), the 4:1 type rpST (TRT 1), the 1:1 type rpST (TRT 2); and the 4:1 type rpST group(TRT 3) respectively. CONT group were not planted rpST. TRT 1 group was treated with rpST once a week for 6 weeks. Each dose contained the rpST equivalent to 100mg from initial to two weeks and 125mg from three weeks to finial week. TRT 2 and TRT 3 groups were planted rpST four times contained the rpST equivalent to 100mg during trial period from initial to two weeks, and 125 mg from three weeks, to four weeks, respectively. All pigs were fed a commercial feed containing 0.9% lysine ad lib. Daily gain increased by 19.4% in TRT 1(p<0.05) compared to the CONT. rpST improved feed/gain by 13.4～28.9% in all treatment groups(p<0.05). Back fat thickness of the all rpST treated groups were 23.3～29.2% thinner than that of the CONT. These results indicated that the rpST stimulated growth performance in finishing pigs and plant type rpST could be used as a growth stimulant for finishing pigs.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.877-888
• /
• 2021

This study used three types of temporary shelters, tents, and prefabricated houses provided by the Chinese government for victims after the Wenchuan earthquake in 2008 as case study objects. Through literature review, 12 evaluation items were selected from the social, economic, and environmental elements of the sustainability of residential space design to analyze and evaluate three types of temporary shelters, and derive their respective characteristics and problems. The analysis results show that the temporary centralized settlements and tents had problems such as imperfect infrastructure, poor sanitation, narrow living space, no personal space, and inconvenience in life. Prefabricated houses had problems such as high construction costs, non-environmentally friendly building materials, occupation of arable land, low recycling rate of materials, and environmental pollution by waste. The common problem of the three types of shelters was that the government took the lead in the construction and distribution of shelters, and the disaster victims passively accept government support. Therefore, disaster victims were not actively involved in the construction and management of temporary communities. Secondly, the designs of all three types of temporary shelters did not fully consider the psychological needs of the victims, especially the need for safe and hygienic personal space. Finally, this research proposes improvement plans for the problems in the sustainable design of three temporary shelters and the construction and management of temporary communities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.305-315
• /
• 2016

Due to the change from small volume production to small quantity batch production systems, individual companies have been attempting to produce a wide range of operating strategies, maximize their productivity, and minimize their WIP level by operating with the proper cycle time to defend their market share. In particular, using a complex workflow and process sequence in the manufacturing line has some drawbacks when it comes to designing the production strategy by applying analytical models, such as mathematical models and queueing theory. For this purpose, this paper uses three heuristic algorithms to solve the job release problem at the bottleneck workstation, product mix problem in multi-purpose machine(s), and batch size and sequence in batch machine(s). To verify the effectiveness of the proposed methods, a simulation analysis was performed. The experimental results demonstrated that the combined application of the proposed methods showed positive effects on the reduction of the cycle time and WIP level, and improvement of the throughput.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.13-20
• /
• 2020

In shipyards, internal materials are assembled after designing and manufacturing each ship's block. Internal material assembly means the installation of parts and equipment except ship's body. In this process, if the assembly of pipes and equipment existing in the block is not done correctly during the assembly between blocks, this causes a lot of costs. In addition, even if the assembly of the internal materials already completed, the production efficiency of the ship is reduced due to rework when problems such as space arrangement of the internal materials occurs. Therefore, this study introduces space arrangement and inspection system before and after hull outfitting work based on coexistence reality technology using 3D design drawing to solve these problems. The various coexistence reality algorithms and inspection systems developed and introduced in this study are based on AR service, which has never been introduced in Korea. So it will be widely applicable to various manufacturing industries using design drawings such as automobiles and architectures as well as ship building process.

• Applied Biological Chemistry
• /
• v.6
• /
• pp.45-50
• /
• 1965

To confirm the increase effect of $MNH_4$ which has been compounded as a result of two years' potted rice experiments, we have established simple experiment areas in the paddy field of Kyung-Puk, Kyung-Nam and Chon-Puk Provinces and have done the completely randomized design experiments with the following results. 1. Comparison of the gross weight of the harvested rice (Straw included) : The $MNH_4$ 1-area has produced 10-28% more harvest than that of control-area. 2. Comparison of the weight of the Unpolished Rice: The $MNH_4$ 1-area has shown 10-23% increase compared with the control-area. 3. In the comparison of the nutrients of the rice from the $MNH_4-area$ with those of the rice from the control area, $MNH_4-area$ showed increase of $N_2$, $P_{2}O_5$ and $SiO_2$ but a slight decrease of $K_2O$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.50-56
• /
• 2021

This study examines 3D scanning and how it is used in the construction field. 3D scanning technology was applied to a real space and compared with drawings in the planning and construction stages. 3D scanning technology has been widely applied in the field of construction, design, construction, and safety. The results of comparing 3D scanning data with drawings are as follows. First, the external shape and dimensions do not show much difference. Second, the internal shape and dimensions are different. Third, indoor lighting layouts are different in all buildings. 3D scanning should be an essential element in the construction stage before completion and should be used for supervision tasks such as material management, improving the efficiency of construction, and safety management through continuous 3D scanning using automation and robots. Follow-up studies in the field of architecture, such as BIM and process management, will be needed.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.88-89
• /
• 2010

최근 인간의 활동범위와 영역이 확대되고 산업이 발전하면서 인간의 삶과 지속가능한 발전 등 도시 기후에 관한 관심도 높아지고 있다. 산업혁명 이후 도시화와 산업화로 인해 인구가 증가하고 도시지역으로 집중됨으로써 도시 열섬화 현상에 대한 도시환경문제가 부각되고 있다. 이는 최근까지도 도시개발에 있어서 기능과 효율성이 우선시 되어 도시기후에 대한 배려가 이루어지지 못하고 있으며, 오히려 과도한 냉난방을 가동하는 등 쾌적한 실내 환경 조성을 위한 노력만을 행해왔다. 도시화에 따른 도시의 열환경 구조의 변화는 토지이용의 변화에 따른 피복상태와 밀접한 관련이 있다는 연구들이 수행된 바 있다. 이렇듯 도시화가 진행됨에 따라서 도심 지표면을 덮고 있는 포장재도 변하고 있다. 대표적인 토지피복재로는 콘크리트와 아스팔트 등의 인공포장재, 수계, 삼림 등으로 크게 나누어 볼 수 있다. 최근 도심의 발달로 인해 도심의 표면은 점차 인공포장재인 아스팔트와 콘크리트로 덮여지고 있다. 인공포장재는 맑은 여름철 낮에 받아들인 열을 야간에도 머금고 있어 도시열섬현상의 주요원인이 된다. 도시화가 진행됨에 따라 토지이용형태가 변화하고 있으며 이러한 토지피복의 변화는 그 지역의 기온과 풍향, 풍속뿐만 아니라 지표온도도 변화시키므로 도시 열환경 구조에 적지 않은 영향을 미치고 있다. 과거에는 자연 환경과 도시공간에 대한 인식이 다른 분야로 나누어져서 다루었지만 현재 위성영상 기술의 발달로 많은 공간 정보를 파악할 수 있게 된 바 도시기후변화에 더욱 직접적이고 근본적인 접근이 쉬워졌다. 원격탐사기법의 활용은 위성자료를 이용하여 동시간대 평면적인 열구조를 정량적으로 파악하는데에 중요한 자료를 제공하여 도시지역을 덮고 있는 인공자재의 존재가 도시열섬의 형성과 밀접하게 연관이 있다는 사실을 짐작할 수 있다. 따라서 도시기후변화의 문제점을 더욱 적극적으로 해결하기 위해서는 토지이용에 따른 지표면 온도 상승의 현황을 파악하고 이를 저감 시킬 수 있는 대책들이 수립되어야 한다. 본 연구는 보다 세분화된 도시 열환경을 정량적으로 분석 평가하기 위해서 토지피복별 분류를 3가지로 대구시 중구 경북대학교 부속 고등학교(이하 사대부고 지점)를 도심지역으로, 경상남도 창녕군 창녕읍 우포늪(이하 우포지점)을 수계지점으로, 경상북도 안동시 길안면 만음리(이하 안동지점) 지점과 대구시 칠곡군 동명면 득명리 팔공산 한티재 도립공원(이하 팔공지점)을 산림으로 분류하여 연구하였다. 대구 계명대학교 기후환경연구실에서 보유하고 있는 AWS(Automatic Weather Station) 자료로 기상요소를 분석하였으며, MODIS Terra 위성영상을 이용하여 지표온도를 추출하고 분석하였다. 또 기상요소와 지표온도를 이용해 회귀식을 도출하여 추정기온을 산출하였다. 그 결과 첫째, 계절에 따른 기온의 시간변화는 여름의 평균기온이 $25.13^{\circ}C$와 $24.12^{\circ}C$로 사대지점과 우포지점의 평균기온이 가장 높게 나타났으며, 이는 도심에서 발생되는 인공열의 영향으로, 우포지점은 수계의 특징이 반영된 결과라 할 수 있다. 둘째, 계절에 따른 풍속의 시간변화는 여름의 경우 우포지점의 풍속이 1.63m/s로 가장 높은 반면 안동지점의 풍속이 0.27m/s로 가장 낮은 것으로 나타났다. 겨울의 경우 팔공지점의 풍속이 1.82m/s로 가장 높게 나타났다. 토지피복에 따른 지표면의 변화가 도시기후에 미치는 영향을 정량적으로 평가하고, 또 지표면 온도와 기온과의 차이를 알아보기 위하여 MODIS 위성 영상을 이용하여 세 지점을 대상으로 토지피복에 따른 열환경을 평가 분석하여 다음과 같은 결론을 얻을 수 있었다. 첫째, MODIS 위성영상을 이용하여 산출한 지표면 온도는 여름철 주간에 안동지점의 경우 주변지역에 비해 지표면 온도가 약 $26^{\circ}C$로 낮게 나타났으며 우포지점의 경우 수계가 가지는 열 완충능력으로 약 $27^{\circ}C$의 낮은 지표면 온도를 나타내었다. 사대지점의 경우 약 $34^{\circ}C$이상의 높은 지표면 온도를 나타내었다. 둘째, MODIS 위성영상을 이용하여 산출한 지표면 온도와 관측된 기온과의 회귀식을 도출하여 상관분석 한 결과, 모든 지점의 값에서 상관성 및 신뢰도가 높은 것으로 나타났다. 셋째, 상관분석의 결과를 통하여 추정한 기온은 지표면 온도와의 차이가 있지만 유사한 패턴의 결과로 추출되었다. 이러한 결과로 볼 때 도시의 인공자재를 이용한 건축과 개발이 도시열섬현상을 유발하는데 중요한 역할을 하는 것을 정량적으로 평가할 수 있었다. 따라서 본 논문의 연구결과를 바탕으로 도시계획에 있어서 인공구조물에 의한 기온과 풍속이 받는 영향을 고려하여 도심의 인공구조물의 배치나 자재에 대한 개발이 이루어져야 할 것이며 열교환의 방해 및 바람순환이 확보되는 구조로 개선되어야 할 것이다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.215-221
• /
• 1976

In this study, noise arresting effect of the noise control room from the transmission of surrounding noise was tested when the packing noise control rooms were set up in the test room in which the prerecorded noise from an engine room was reradiated at the same level as the original pressure. The inner space of control room A is $3.389m^3(1.19\times1.19\times2.14m)$ having walls furnished with plywood board 9mm in thickness and noise control room door$(60\times45cm) $ and illumination lamp are placed. In case of the control room B, noise absorption board(10mm fiber board which holds the corntype concavity with diameter of 5mm, depth 5mm, space 15mm) is adhered to the internal ceiling and styrol foam boards(20mm) to the walls. The other struction is same as the control room A. Type C is the same as B except wool board(Glass Fiber, 33mm) on the walls. Type D is same as type A except that the thickness of wall is 12mm and wood pyramid type cone$(5\times5\times13cm)$ is adhered to the ceiling ana walls(Fig. 1). When the recorded noise and vibrated noise were controlled in various levels. The noise pressure which passed through the control rooms was measured by sound level meter(Bruel & Kjar 2205, measuring range 37-140dB). In order to calculate the absorption rate in the control rooms the noise pressure was measured at different distances when the recorded noise pressure was radiated. The followings are the results obtained from the experiment. 1. When the noise pressure of the test room was 60dB, transmission rate of type A was $69.7\%$ and increased $3.3\%$ per 10dB. At the same condition, the rate was $53.9\%$ and increased $4.5\%$ per 10dB in type D. Type D was the most effective in noise arresting of the four and the effect was D,C,B and A in order(Fig.2). 2. When the oscillator sound and vessels noise were radiated in 1,000Hz, at one meter distance to the type A and D, the oscillator sound pressure were 77dB and 73dB, while the vessels noise pressure were 73.3dB and 66.2dB respectivley(Fig.3). 3. Refering to the influence of the frequency to the lower oscillator sound(1,000Hz) pressure, both type C and D were almost same at 140cm but type C was 0.3dB lower than type D at 20cm distance(Fig.4).