• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.414-421
• /
• 2004

To reduce farmer's stress from solar radiation and ultraviolet radiation(UV), the sunshade hat with a large brim and special structure for ventilation was developed and tested with manikin heads outdoors at previous study(Kim and Choi, 2002). To evaluate the protection efficiency of the sunshade hat, human trial test was performed at outdoors. The results were as follows; Skin temperatures(7 sites), heart rate, temperature inside the hats, temperature and relative humidity inside clothing on the back in wearing developed sunshade hat were significantly lower than those in wearing the controlled hat. In subjective sensation, subjects answered to feel significantly hotter, more humid and more uncomfortable in wearing the controlled hat. But relative humidity inside the hats was significantly higher in wearing developed hat. In rectal temperature, there were no significant differences between two hats.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.967-971
• /
• 2003

As the concerns over health increased in 1990's, research and development on the health material were also activated. The development of UV-cut textile became the hot issue, because the damage of W irradiation due to ozone depletion has become widely known. UV-cut effect is determined by the material, the color, the organization and the density of UV-cut fibers. UV-cut effect is very different according to the fibers. Polyester is known to have a better effect. Even in the same textile material, staple fiber has more effect than filament fiber. Different colors have different offsets. Although textiles have the same color, the effects can be different according to the depth of color. PET, PET/cotton blend, nylon and cotton fabrics were ultraviolet cutting finished with padding method using several absorbers. These UV-cut effect can be improved through the processing. Safety of UV-cut textile for the body must be considered future, Until now the figure of the UV-cut effects has been emphasized. There has been no experiment on the human body, although the textiles are directly on the human body. Futhermore there os no safety standard of UV-cut textiles. Therefore every effort will be made to set the standard UV-cut processing is established. The need of UV-cut products will be known to the consumers.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.299-306
• /
• 2016

In this study, new hydroxyapatite powder surface composites were investigated for protective effects against ultraviolet rays. Hydroxyapatite (HAp) is biocompatible and does not cause nebula phenomenon on skin. We investigated the surface modification of hydroxyapatite to improve UV block and skin usage. Dimethicone, lauroyl lysine, triethoxycaprylylsilane and silica were used as coating agents for the surface modification of HAp. To prepare the composite complex of the modified surface, the dimethicone, lauroyl lysine and triethoxycaprylylsilane were prepared by a dry process, and silica by a hydrothermal synthesis method. The HAp-silica was chosen as the best composite powder when measuring its sun protection levels. We investigated the characteristics of the surface of HAp-silica by SEM, particle size analyzer and energy dispersive spectrometry (EDS). Additionally, the stability in the formulation, UV block effect, and safety in BB creams were investigated. In conclusion, HAp-silica prepared by the modification of HAp complex surface improved the skin usage and UV block effect by enhancing the white cloudy phenomenon. These results indicate that HAp-silica may be used for UV block cosmetics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.10-15
• /
• 2020

Ultraviolet rays, which have wavelengths smaller than 400 nm, are very harmful to the eyes. Recently, high-energy visible light was also revealed to be harmful to retinal cells. Therefore, polymer eyeglass lenses that can block UV and high-energy visible light are needed for eye health. In this study, high-refractive-index polymer eyeglass lens, n=1.67, were manufactured using the injection-mold method with the m-xylene diisocyanate monomer, 2,3-bis((2-mercaptoethyl)thio)-1-propanethiol monomer, benzotriazole UV absorber, release of alkyl phosphoric ester, dye mixture of CI solvent violet 13, and catalyst of dibutyltin dichloride mixture. A multi-layer anti-reflection coating was applied to manufactured polymer eyeglass lenses for both sides using an E-beam evaporation system. The optical properties of the manufactured lenses with the UV and high-energy visible light-blocking function were analyzed by UV-visible spectrophotometry. As a result, the polymer eyeglass lens with a UV absorber of 0.5 wt. % blocked 99% of UV and high-energy visible light shorter than 411 nm. The average transmittance of the polymer eyeglass lens with a UV absorber of 0.5wt.% was 97.9% in the range of 460 ~ 660 nm for photopic eye sensitivity higher than 10%. Therefore, clear image acquisition in photopic vision is possible.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1205-1223
• /
• 2020

This research investigated the protective effect on hair for 3 commercial hair oil products containing UV filters upon UVA and UVB irradiation. Hair tresses each weighing 2 g were prepared from black virgin hair. Hair tresses treated with 0.5 g of hair oil were irradiated by UVA (365 nm) and UVB (302 nm) lamp for up to 600 hours. Color of hair was measured using a spectrocolorimeter, tensile strength and elongation of hair were measured using a biological tensile tester, surface morphology was examined using a scanning electron microscope. Experimental results were analyzed using SPSS statistical software. Hair color and tensile strength were both affected by UVA and UVB irradiation. Significant differences in the color and tensile strength were observed between untreated hair and hair treated with hair oils. Good UV protective effect observed in Oil 2 and Oil 3 was attributable to the type and the combination of UV filters contained in the products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.64-80
• /
• 1992

Considerable interest has been generated in age-related non-enzymatic glycosylation and crosslinking of collagen in view of its extracellular nature, and its long biological half-life. The effects of UVA, which penetrates deep in dermis, and reactive oxygen species (ROS) on age- related changes of dermal collagen were studied. The amount of nonenzymatic glycosylation, fragmentation, and crosslinking of collagen were monitored from the mixtures of Type I collagen from calf skin and glucose, irradiated by UVA, with or without scavengers of ROS. At both high and low glucose dosages, non-enzymatic glycosylation was not affected by UVA irradiation. At high glucose dosage, however, glycosylation was reduced by the scavengers of superoxide radical and singlet oxygen, bolt not by hydroxyl radical scavengers. Fragmentation was increased by UVA and decreased by all ROS scavengers. Crosslinking was also enhanced by UVA, and effectively blocked crosslinking. Superoxide radical and singlet oxygen, which were produced by autoxidation of glucose independently to UVA, may encounter the initial phase of glycation. ROS generated from Amadory compounds by UVA enhanced fragmentation and crosslinking Hydroxyl radical was thought to be a major ROS affecting crosslinking. These results suggest that UVA and ROS are able to enhance age-related structural changes of collagen, as affecting many other tissue and cellular components.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.231-238
• /
• 2013

In this study, the $TiO_2$ nano spheres were synthesized by Sol-gel method to give an excellent UV-blocking effect and increase waste adsorption. The pH value was adjusted to obtain a superb UV-blocking effect and adsorption capacity due to the high surface area which is the characteristics of porosity. Base treated $TiO_2$ showed outstanding characteristics. The adsorption of gycerine onto the $TiO_2$ sample using TGA resulted in a high surface area of 1.16 mg/mg. This also showed a high reflectance in the UV-A region. In order to find the optimum dispersion, inorganic powder particles were maintained their sizes as 180 nm for about 6 months. The size of particles were measured using ester oil and silicon oil. Overall, the results reveal that $TiO_2$ has an excellent capability sunscreen in the UV-A region and skin waste adsorption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.482-487
• /
• 2016

Ultra-violet rays are very harmful to eye health care. The blocking of ultra-violet rays and a reduction of optical reflection in the visible light range, which is to increase the share of transmitted light, and avoid the formation of ghost images in imaging, are important for the applications of polymer eyeglasses lenses. In this study, the high-refractive index polymer lenses, n=1.67, were fabricated by injection-molded method with the xylene diisocyanate monomer, 2,3-bis-1-propanethiol monomer, and benzotriazol UV absorber (SEESORB 709) mixture. To reduce the reflection of the polymer lens surfaces, multi-layer anti-reflection (AR) coatings were coated for both sides of the polymer lens using an E-beam evaporation system. The optical properties of the UV blocking polymer lens were characterized using a UV-visible spectrometer. The material properties of the thin films, which were composed AR coating layers, refractive index, and surface roughness, were analyzed by ellipsometry and atomic force microscopy. As a result, the fabricated polymer lens perfectly blocked ultra-violet rays below 395 nm with a blocking rate greater than 99%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4416-4422
• /
• 2014

In the present study, mycosporine-like amino acids (MAAs)were extracted from in Chlamydomonas hedleyi, and their function was investigated regarding to protective capacity against UV radiation and a possibility to be developed into functional suncream including MAAs by using natural compounds. In particulr, we assessed UV protective ability and anti-inflammation of shinorine in human skin cells. As a result, shinorine can protect the skin against damage by the absorption of energy from UV radiation and functions as an anti-wrinkling substrate through a increase of collagen synthesis. These data suggest that shinorine can be utilized not only as a substrate to protect UV radiation, but anti-aging material in cosmetic products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.4
• /
• pp.219-225
• /
• 2007

Bis-ethylhexyloxyphenolmethoxyphenyltrizine (BEMT) is one of the most widely used chemical UVA+UVB double absorbers in sunscreen products. But topical application of BEMT is restricted due to its defects in product. The purpose of this study is to adopt the sunscreen product of solid lipid nano-particles containing BEMT (BEMT-SLN). The particle diameters, the encapsulation efficiencies and the crystallization index (C.I.) are about 330nm, 93.3 % and the 4.3 %. As a result, in vitro penetration and release of BEMT were generally higher in O/W emulsion than the SLN formulation. However in vivo study, it was shown that the rate of release could be decreased by 80 % in the SLN formulation. The sun protection factor (SPF) of the SLN formulation increased by 100 % in the in vitro UV protection test. Therefore, SLN formulation potentiated the UV-blocking power of BEMT. This study suggest that SLN can be used for the encapsulation of BEMT.