• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.311-314
• /
• 2000

자왜 재료는 자계 포화 이하에서 비선형 특성을 갖는다고 알려져 있다. 그러나 지금까지 비선형 특성을 표현하는 자왜 재료의 구조 방정식을 유도한 사례는 전무한 실정이다. 본 연구에서는 자계 포화 이하에서 비선형 특성을 갖는 자왜 재료의 비선형 구조 방정식을 4차 텐서를 이용하여 유도하였다. 나아가 유도된 구조방정식을 이용하여 자왜 재료 내의 파동 방정식을 정식화하였다. 그리고 비선형 특성을 갖는 자왜 재료에서 평면파가 자계 방향을 따라 전파될 때 등방성 자왜 재료의 탄성파 속도를 구하였다. 이상의 결과를 검증하기 위해서 자왜 재료 중에서 가장 널리 사용되고 있는 Terfenol-D의 탄성파 속도를 측정하여 본 연구에서 유도한 자왜 재료 비선형 구조 방정식의 타당성을 일부 검증하였다. 향후에 자왜 재료의 정확한 특성을 측정하여 본 연구 결과와 비교함으로써 본 연구에서 유도한 비선형 구조 방정식의 타당성을 검증하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.54-61
• /
• 2001

Magnetostrictive materials have nonlinear elasto-magnetic properties. However the constitutive equations to describe the nonlinear properties are not available, yet. In this study we develope the equation in magnetostrictive materials by use of piezomagnetic constitutive equation which is quasi-linearized. With the wave equation, we determine the propagation velocity inside the magnetostrictive materials when a plane wave propagates along a given magnetic field. Validity of the calculated velocity is verified through comparison with experimental velocity measurement results for the most representative magnetostrictive materials. Terfenol-D.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.365-368
• /
• 2000

자왜 재료는 자계 포화 이하에서 비선형 특성을 갖는다고 알려져 있다. 그러나 지금까지 비선형 특성을 표현하는 자왜 재료의 구조 방정식을 유도한 사례는 전무한 실정이다 본 연구에서는 자계 포화 이하에서 비선형 특성을 갖는 자왜 재료의 비선형 구조 관계식을 유도하였다. 나아가 유도된 구조 관계식을 이용하여 자왜 재료 내의 파동 방정식을 정식화하였다. 그리고 비선형 특성을 갖는 자왜 재료에서 평면파가 자계 방향을 따라 전파될 때 이방성 자왜 재료를 등방성 재료로 가정하여 종파와 횡파 속도를 구하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.356-362
• /
• 2007

Magnetostrictive materials have been used for linear actuators due to its large strain, large force output with moderate frequency band in the presence of magnetic field. However their performance analysis is difficult because of nonlinear material behaviors in terms of coupled strain-magnetic field dependence, nonlinear permeability, pre-stress dependence and hysteresis. This paper presents a finite element analysis technique for magnetostrictive linear actuator. To deal with coupled problems and nonlinear behaviors, a simple finite element approach is proposed, which is based on separate magnetic field calculation and displacement simulation. The finite element formulation and an in-house program development are illustrated, and a simulation model is made for a magnetostrictive linear actuator. The fabrication and performance test of the linear actuator are explained, and the performance comparison with simulation result is shown. Since this approach is simple, it can be applied for analyzing magnetostrictive underwater projectors and ultrasonic transducers.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.913-920
• /
• 1995

RFe$_2$(R=rare earth) Laves Phase intermetallic compounds are one of the promising materials for magnetostrictive applications, due to large magnetostriction coefficients in the order of 10$^{-3}$ . However, because RFe$_2$intermetallic compounds have large magnetostriction constants as well as large magnetocrystalline anisotropy constants, a large external magnetic field is necessary to reach saturation magnetostriction. Hence researches on giant magnetostriction have been concentrated on producing materials exhibiting a high value of magnetostriction in a low magentic field. The main research trend of the giant magnetostriction to obtain the large value in the low magnetic filed, fortunately as the signs of magnetocrystalline anisotropy constans in RFe$_2$intermetallic compounds alternate with the rare earth metals, has been to substitute the rare earth metal for others and hence to reduce the magnetocrystalline anisotropy energy. In addition, amorphous RFe$_2$alloys have been researched. In this research, both of the methods which are substitution of the rare earth metal and amorphization in RFe$_2$ intermetallic compounds are simultaneously conducted to obtain the large magnetostriction coefficient in the low external magnetic field. Among them, SmFe$_2$and PrFe$_2$are selected, and amorphized in substrate-free bulk state. Magnetism in amorphous bulk (Sm$_{1-x}$ Pr$_{x}$) Fe$_2$alloys is investigated in the low magnetic field.ld.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.333-341
• /
• 2022

Magnetoelectric (ME) composites are comprised of magnetostrictive and piezoelectric phases. Lots of theoretical and experimental works have been done on ME composites in the last couple of decades. The output performance of ME composites has been enhanced by optimizing the constituent phases, interface layer, dimensions of the ME composites, different operating modes, etc. However, the detailed information about the characterization of ME coupling in ME composites is not provided yet. Therefore, in this tutorial paper, we are giving an insight into the details of measurements of ME voltage coefficient of ME composites both at off-resonance and resonance conditions. A symmetric type Gelfenol/PMN-PZT/Gelfenol ME composites were fabricated by sandwiching (011) 32-mode PMN-PZT single crystal between two Galfenol plates by epoxy bonding are used for the example of ME coupling measurement. The details about the experimental setup used for the measurement of ME voltage coefficient are provided. Furthermore, a step-by-step measurement of ME voltage coefficient using computerized program is demonstrated. We believe the present experimental measurement details can help readers to understand the concept of ME coupling and its analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.705-710
• /
• 2002

Magnetostrictive materials are used low frequency sonar transmitter instead of piezoelectric materials. But it is difficult to analyze due to the nonlinearity and hysteresis of magnetostrictive materials. This paper deals with the program development for the finite element modeling of magnetostrictive tonpilz transducers and for analyzing their acoustic characteristics. To take into account the nonlinearity of magnetostrictive materials, the magnetic field calculation is separated form the displacement calculation, and a curve fitting is adopted for the nonlinear behavior of the magnetic and mechanical strain fields. At first, the magnetic field is obtained by using a commercial FEM software and the displacement of the transducer is calculated by plugging the obtained magnetic field into forcing term. To verity the accuracy of the developed program, a comparison is made with a commercial code, ATILA.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.198-199
• /
• 2002

연자성 재료는 투자율이 높고, 큰 포화자속 밀도를 갖는 재료로서 외부자계에 용이하게 자화되며, 그 용도를 살펴보면 전기에너지 변환, 자기기록. 변압기, 변성기, 각종 코아, 모터, 자기센서, 전ㆍ자계차폐재등 많은 전자기기에 이용되고 있다. 따라서 연자성재료는 기본적으로 결정자기이방성과 자왜가 작아야 한다. 한편 전기, 전자기의 경량화 및 고효율화를 위하여서는 포화자속밀도의 극대화, 고주파영역에서의 우수한 연자기 특성 및 저에너지 손실을 갖는 재료개발이 요구된다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.49-51
• /
• 1989

The effect of Mo elenent and annealing condition on the magnetic properties were investigated in Fe$_{80}$B$_{12}$Si$_{8}$ amorphous alloy. With increasing Mo contents, soft magnetic properties were improved by decreasing coercive force and increasing maximum permeability. These improvements were attributed to the decreasing of magnetostriction by Mo addition. The annealing treatment also improved the soft magnetic properties of (Fe$_{1-x}$ Mo$_{x}$)$_{80}$ B$_{12}$ Si$_{8}$ amorphous alloys. It could be thought that these improvements were ascribed to the relaxation of internal stress.nal stress.ess.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.99-101
• /
• 1996

This paper is concerned with the fabrication of (Fe,Co)-Si-B amorphous magneto-strictive wire which attracts strong attention as a new sensor material. First, we put the ingot of (Fe$\sub$1-x/Co$\sub$x/)$\sub$77/Si$\sub$8/B$\sub$15/ composition into quartz tube. Then, under the condition of 400MHz and 8kW, we melt and mix the in-got in the high frequency induction furnance. After that, we obtain the magnetostrictive wire of 100∼150$\mu\textrm{m}$ in diameter by injection and rapid quenching within the high rotating water. Finally, we find that the wire is under the amorphous state.