• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.7 no.3
• /
• pp.151-159
• /
• 1978

A heat transfer model for the case of simultaneous vibration of both the heated surface and its surrounding medium is constructed and the dimensional analysis is applied to this model in order to and the governing dimensionless Parameters in which the vibration effects the heat transfer. In the second Part of this study, an experimental investigation of the effect of vibration on natural convective heal transfer from spheres has been performed for the case of the external oscillatory motion being imposed on the heated surface which is immersed in an otherwise undisturbed air, The ranges of the experimental variables were: temperature difference 10 to $120^{\circ}C$; vibration frequency 10 to 120Hz; displacement amplitude 1.3 to 12.5mm. Three different diameter aluminum were used as the experimental models. Improvements in heat transfer due to vibration were observed, with the maximum increase being 330 Percent. A dimensionless correlation describing the measured heat transfer data is given.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.265-266
• /
• 2020

본 논문에서는 IoT 기술을 이용한 재난 안전 모니터링 시스템을 제안한다. 기술의 발전으로 개인 통신 기기에도 IoT가 범용적으로 사용되고 있으나 재난 안전 모니터링 시스템과의 접목은 쉽지 않다. 본 논문에서는 IoT 기술 기반 재난 안전 모니터링 시스템을 개인 통신 기기에 접목 시키기 위해 카카오톡 플랫폼을 이용한다. 재난 안전 모니터링 시스템은 평시에 IoT 센서로 온도, 강우량, 진동 및 미세먼지를 모니터링하여 정보를 제공한다. 만약 화재, 폭우, 지진 등의 자연 재난 등이 발생하면 메신저 플랫폼인 카카오톡을 통하여 재난정보를 재난 초기에 제공함으로써 피해를 최소화 하는 것을 목표로 한다.

• 재활복지
• /
• v.22 no.3
• /
• pp.225-257
• /
• 2018

The purpose of this study is to find the application point of hearing augmentation technology development through examining the risk context experience of people with hearing impairment and the use of assistive device used as an alternative technology. Data of 355 people with hearing impairment with official disability grading was analyzed. The results of this study are first, research participants had no experience of recognizing any sound or vibration in situations highest in the order of means of transportation, material, and nature. Especially the ratio of being unable to recognize the sound and vibration of means of transportation was high, which implies the high possibility of people with hearing impairment experiencing risk. Secondly, the risk context that people with hearing impairment will most likely to experience are highest in the order of traffic accident, pedestrian accident, and daily life at home. Thirdly, the recognition of 2G phone/smart phone, vibrating digital alarm clock, light bar, vibrating wrist watch as assistive device for risk context awareness and notification was high and the satisfaction level of 2G phone/smart phone was the highest. Fourthly, the research participants had high recognition of assistive device for communication in the order of hearing aid, smart phone, videophone, cochlear implant and 2G phone and it was found that the satisfaction level and communication improvement level was the highest using the smart phone. Lastly, for the development of hearing augmentation technology the research participants recognized the importance of portable/wear convenience, price, and motion accuracy and for notification delivery means they preferred the method of using sight(text and light). Based on the results of this study policy and practical plans for hearing augmentation technology development for people with hearing impairment in risk context are proposed.

• Composites Research
• /
• v.34 no.3
• /
• pp.155-160
• /
• 2021

Metamaterials are complexes of elements that can create properties not found in naturally occurring materials, such as changing the direction of forces, creating negative stiffness, or altering vibration and impact properties. In the case of wood pile metamaterials that are easy to manufacture and have excellent performance in reducing vibration and shock in the vertical direction, basic research on variables affecting shock transmission is needed to reduce shock. Although research on impact reduction according to geometrical factors is being conducted recently, studies on the effect of material variables on impact reduction are insufficient. In this paper, finite element analysis was carried out by variablizing the geometrical properties (lamination angle, diameter, length) and material properties (modulus of elasticity, specific gravity, Poisson's ratio) of wood pile cylinders. Through finite element analysis, the shape of the wooden pile cylinder delivering impact was confirmed, and the effect of each variable on the reduction of impact force and energy was considered through main effect diagram analysis, and frequency band analysis was performed through fast Fourier transform. proceeded In order to reduce the impact force and vibration, it was found that the variables affecting the contact area of t he cylinder have a significant effect.

• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.105-113
• /
• 2017

Recently mountain tourism has been promoted and introduction of railroads with utilizing mountain resources is being planned. With the government policies to increase the share of eco-friendly transportation on railroad, national double-tracking of single rail and improvement projects are on going. However, the eco-friendly railroad policy suggests the environmental impact assessment items only on air quality, water quality, geographical/geological features, fauna/flora, natural/environmental resources, noise/ vibration, and recreation/landscape. And for fauna/flora and natural/environmental resources, confirming the presence of environmental protection zone is enough to satisfy legal requirement. This study suggested to evaluate environmental/ecological values with quantitative data. Evaluation indices and evaluation items have been selected to provide the data. Each of the subject map and railroad network was overlapped. The study selected naturalness and diversity as major indicators and calculated weight values of the items under the indicators, which are to be usd for the selection of the sites for railway development. This assessment method could be applied to the environmentally friendly construction of railroads in the future.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.30-40
• /
• 2022

Wildfires, which occur sporadically and irregularly worldwide, are distinct natural disturbances in combustible vegetation areas, important parts of the global carbon cycle, and natural disasters that cause severe public emergencies. While many previous studies have investigated the variability and changes in wildfires globally based on fire emissions, burned areas, and fire weather indices, studies on East Asia are still limited. Here, we explore the characteristics of variability and changes in wildfire danger over East Asia by analyzing the fire weather index for the 40 years-1981-2020. The first empirical orthogonal function (EOF) mode of fire weather index variability represents an increasing trend in wildfire danger over most parts of East Asia over the last 40 years, accounting for 29% of the total variance. The major contributor is an increase in the surface temperature in East Asia associated with global warming and multidecadal ocean variations. The effect of temperature was slightly offset by the increase in soil moisture. The second EOF mode exhibits considerable interannual variability associated with the El Nino-Southern Oscillation, accounting for 17% of the total variance. The increase (decrease) in precipitation in East Asia during El Nino (La Nina) increases (decreases) soil moisture, which in turn reduces (increases) wildfire danger. This dominant soil moisture effect was slightly offset by the temperature increase (decrease) during El Nino (La Nina). Improving the understanding of variability and changes in wildfire danger will have important implications for reducing social, economic, and ecological losses associated with wildfire occurrences.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.123-128
• /
• 2008

The golden turbid solution of cordierite precursor was obtained by using magnesium ethoxide in sol-gel method, while the clear solution of cordierite precursor was obtained when 5%-$Zr(OC_3H_7)_4$ solution was used in the sol-gel reaction. $SiO_2$ component was confirmed by infrared spectra showing $1045cm^{-1}$ and the stretching vibration of gelish $SiO_4$ showed $1140cm^{-1}$ and $940cm^{-1}$. The component of $Al_2O_3$ showed at $580cm^{-1}$ and network structure of $Al_2O_6$ showed at $680cm^{-1}$. The component of MgO was confirmed at $575cm^{-1}$ as the stretching vibration. X-ray diffraction analysis showed ${\mu}$-cordierite crystal was showed up at temperature above $1000^{\circ}C$ at the mole ratio of cordierite precursor and water (1:5). ${\mu}$-Cordierite and ${\alpha}$-cordierite were coexisted at $1050^{\circ}C$ for the mole ratio of cordierite precursor and ammonia (1:5) while ${\alpha}$-cordierite was only existed at $1100^{\circ}C$ for the same mole ratio as mentioned above.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.238-243
• /
• 2006

최근에는 통신기술과 인터넷의 발달로 원격의 사람과 전화, 이메일, 메신저 또는 화상회의 시스템 등을 통해서 쉽게 의사소통 할 수 있다. 이 시스템들은 주로 음성, 그림, 동영상 또는 문자 기반의 시청각 정보를 서로 주고 받으며 자신의 의사 및 감정을 전달하는 통로를 제공한다. 그러나 일상 생활에서 시청각 정보 외에 촉감 정보도 서로 의사소통 하는데 중요한 역할을 한다. 악수, 포옹 등의 촉감 상호작용은 사람 사이에서 친근감을 표시하는데 가장 직접적인 방법으로 자신의 감정을 전달하거나 느낌을 표현하는데 사용된다. 그럼에도 불구하고 촉감 상호작용을 가능케 하는 의사소통 시스템의 연구는 아직 폭넓게 진행되고 있지 않다. 본 논문에서는 일상에서와 같이 원격에서도 상대를 바라 볼 수 있고 자연스럽게 접촉할 수 있는 원격 촉감 커뮤니케이션 시스템을 제안한다. 이 시스템에서는 로컬 사용자가 손가락으로 상대의 몸 특정 부위를 만질 수 있고 서로 그 촉감을 실시간으로 느낄 수 있다. 이 시스템은 크게 AR 시스템, 그래픽 시스템, 햅틱 시스템, 택타일 시스템의 부시스템들로 나눌 수 있다. AR 시스템에서는 몸의 한 부위에 사각형의 AR 마커를 부착한 원격 사용자를 웹카메라로 촬영하고 ARToolKit 을 사용하여 마커의 위치를 측정한다. AR 마커의 바로 밑에는 택타일 장치가 장착되어 있으며 이 부위를 통하여 원격의 사용자는 로컬사용자가 자신의 팔을 만지는 느낌을 받게된다. 그래픽 시스템은 로컬사용자에게 촬영된 원격 사용자와 측정된 마커의 위치가 대표하는 원격 사용자의 가상 피부, 그리고 자신의 가상 손가락을 보여준다. 햅틱 시스템에서는 촉감 장치를 사용하여 로컬 사용자의 손가락 위치를 구하여 원격 사용자의 가상 피부와 접촉했을 때 그 충돌을 감지하고 접촉력을 계산하여 촉감 장치에 반영함으로써 그 접촉력을 느낄 수 있도록 한다. 택타일 시스템에서는 원격 사용자의 AR 마커 밑에 장착된 배열 타입의 진동 촉감 장치에 접촉 정보를 주어 로컬 사용자와 접촉 했을 때 접촉 부위에 진동을 줌으로써 촉감을 느끼도록 한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.26-37
• /
• 2012

In this study, a power driver for actuating PVDF film that has the characteristic of dramatic impedance change caused by size and operating frequency variation was developed to dehyance rate of dredged sediment. In order to supply maximum energy to the PVDF film, a full-bridge circuit implemented using IGBT with a R-L-PVDF film impedance matching circuit was designed and constructed. the dehydration capabilities of the PVDF film actuated by the developed driver cleary was tested for dredged sediment. It was found that the PVDF film actuated by the developed driver cleary enhanced dehydration, avout three times faster during the first 3 minutes, compared to natural dehydration. The result of the experiment confirmed that the developed power driver for actuating Pvdf film could be used effectively for dehydration of dredged sediment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.53-60
• /
• 2021

High voltage CV cables have been widely installed underground due to their convenience and urban aesthetics. However, cable accidents have occurred frequently owing to poor construction and natural degradations. This paper proposes the method to measure the multi parameter measurement for optimum diagnostics of high voltage cable connection parts and verifies its technical usefulness. This measurement is intended to diagnose degradations of cable connection parts by using simultaneous vibration and thermography as well as partial discharge(PD). The experiment in a shielded laboratory was carried out to verify the usefulness of the multi parameter measurement. The experiment defined the degradation of the cable connection part as 12 types, and produced each degradation sample. As a result of experiment, it was possible to check the correlation of vibration signals with regard to progress in some defects. In the case of thermography, the coherence with regard to the progress of some defects was found. We figure that the proposed method would be useful also in the noise environment.