• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.685-689
• /
• 2001

We carried out these experiments to examine the effects of element substitution of Co and La-Co for Sr-ferrite. The calcined properties of Co and La-Co element substitution were examined, and also the sintered magnetic properties were measured with the stoichiometric condition. The magnetic properties of $(La-Co)_{0.3}-SrM$ composition are as follows; $(M_s)$: 71.08 emu/g, $iH_c$: 4.38 kOe and $B_r$ : 4.18 kG, $iH_ c$ :4.35 kOe, $BH_{max}$: 4.3 MGOe. The $BH_{max}$ value was increased up to 10 % compared with conventional values. Our results imply that the magnetic properties of Sr-ferrite can be improved by the substitution of those elements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.18-18
• /
• 2010

전기적 에너지를 기계적 에너지로 변환하고 또한, 기계적 에너지를 전기적 에너지로 변환할 수 있는 압전 세라믹스는 압전 변압기 (piezoelectric transformer), 초음파 모터, 센서 등과 같은 응용분야에 광범위하게 사용되고 있다. 특히, 전원장치에 있어서 현재 주요 전자제품에 사용되고 있는 권선형 변압기와 같은 전자 변환기의 대체품으로 압전 세라믹스 소재의 특성을 이용한 압전변압기의 개발과 응용연구는 국내외적으로 활발히 연구되어왔다. 압전변압기는 권선형 변압기와 비교 하였을 때 누설자속이 없어 노이즈 발생이 없고, 공진주파수만을 이용하므로 출력의 파형이 정현파에 가까워 고조파 잡음이 없으며, 불연성의 특징을 가지고 있다. 추가적으로 압전 변압기는 소형화, 슬림화, 경량화가 가능하며 90%이상의 높은 효율을 얻을 수 있다. 또한, 단판형 압전변압기의 출력한계를 개선하기 위해 높은 승압비와 고출력을 갖는 적층타입의 압전변압기가 제안되었다. 압전변압기용 조성 세라믹스는 높은 에너지 변환효율을 위해서 전기기계결합계수 ($k_p$)가 커야 하며, 발열에 의한 온도 상승을 억제하기 위하여 기계적 품질계수(Qm)가 큰 것이 바람직하다. 또한, 높은 전류를 발생하기 위해서는 유전상수가 커 압전변압기의 출력측 정전용량을 크게 하여야한다. 이러한 압전변압기의 제작 조건을 위해 우수한 압전 및 유전특성을 갖는 PZT계 세라믹스가 주로 사용 되어져 왔다. 그러나, PZT계 세라믹스의 우수한 압전 및 유전특성에도 불구하고 $1000^{\circ}C$에서 급격히 휘발하는 PbO의 성질 때문에 환경적으로나 인체의 건강문제로 인해 전세계적으로 그 사용량을 제한하고 있다. 또한 적층 압전변압기의 구조적 특성상 내부전극과 함께 소결하여야 하는데, 이때 소결온도가 높으면 값비싼 Pd합량이 높은 전극을 사용하여야 한다. Pd함량이 10%미만인 Ag/Pd 전극을 사용하기 위해서는 $950^{\circ}C$ 이하에서 저온소결이 가능한 세라믹스 제조가 필수적이라 할 수 있다. 소결온도를 낮추는 방법으로는 다른 물질들을 치환하여 소결온도를 낮추는 방법과 미세분말을 만들어 그레인사이즈를 미세화 하는 방법들이 있다. 많은 미세 분말 제조 방법 중에서 Attrition mill은 일반적인 ball mill에 비해 분말의 입도를 미세하게 할 수 있어 증가된 분말의 비표면적에 의하여 반응을 촉진시킴으로써 저온소결이 가능한 세라믹스를 만들 수 있다. 따라서 본 연구에서는 소결온도가 낮으면서도 유전 및 압전특성이 우수한 조성을 사용하여 적층 압전변압기를 제작하여 전기적 특성을 조사하였다.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2010

This experiment was conducted to investigate the effect of greenhouse orientation on the greenhouse environment and the growth and yield of tomato cv 'Momotaro-Yoku' in forcing culture. The photosynthetic phpton flux density (PPFD) of a.m was higher in north-south orientation than that in east-west orientation and it was opposed in the p.m. Mean PPFD of a day was higher in east-west orientation than that in north-south orientation because the light transmitting area became larger in east-west orientation with decrease of incidence angle. The PPFD at 60 cm point above ground of all furrows was poor due to shadows near plants and it was higher in north-south orientation than that in east-west orientation. The air temperature in the greenhouse was higher in east-west orientation than that in north-south orientation but there was no significant difference since mid February as solar altitude goes up. The soil temperature was some higher in east-west orientation than that in north-south orientation and there was not significant difference among ridges. In east-west orientation, as ripening was promoted, high early yield of tomato were obtained. So total yield was greater about 8% in east-west orientation than that in north-south orientation. Therefore, it was considered that east-west orientation is more advantageous than north-south orientation for forcing culture of tomato.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.294-301
• /
• 2016

This study was conducted to analyze the seedling quality of korean melon and the growth after transplanting of korean melon nursed under the LED sources. LED sources were RB7 (Red:Blue=14:2), RB3 (Red:Blue=12:4) and Blue(B=16). Photosynthetic photon flux density(PPFD) was 50, 100 and $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The lighting treatment was started after graft-taken and was applied for 20 days at 4 hours(05:30 and 07:30, 17:30 and 19:30) per day. Plant height and stem diameter of scion were longer and thicker under a high ratio of blue light condition. Dry matter ratio and compactness were highest in RB3 compared to the other LED sources treatments. $CO_2$ exchange rate increased $5.44{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under RB7 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and dropped to negative values under control. PPFD $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ of RB3 resulted in the longest plant height by 132.3cm and flowering ratio also was the highest by 75%.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.249-257
• /
• 2017

Agastache rugosa, is a perennial medicinal plant commonly used in Chinese herbalism, and may have anti-atherogenic and antibacterial properties. Here in this study, we investigated the growth and variations in antioxidant contents of A. rugosa in response to nutrient solution and photosynthetic photon flux density (PPFD) with artificial lighting for a hydroponics culture. Fluorescent light at 150, and $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD with a 16/8 (light/dark) photoperiod, combined with four different nutrient solutions [developed by Horticulture experiment station in Japan (HES), University of Seoul (UOS), Europe vegetable research center (EVR), Otsuka-house 1A (OTS)], were used in a hydroponics culture system for 6 weeks. The shoot and root dry weights of A. rugosa grown with the OTS were significantly higher than those of other nutrient solutions. The amount of tilianin was the highest grown with the OTS, followed by EVR, HES, and UOS. Total acacetin content was the highest in A. rugosa grown under EVR which was statistically similar with OTS. The A. rugosa grown under $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD produced higher fresh weight and both acacetin and tilianin contents than that grown under $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD. The present results suggested that OTS along with $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD could be an optimum growing condition for better growth and higher accumulation of tilianin and acacetin contents in A. rugosa with hydroponic culture systems in a plant factory.

• Proceedings of the KIEE Conference
• /
• 2004.11d
• /
• pp.93-96
• /
• 2004

In this paper, we analyzed the current limiting characteristics according to increase of source voltage in the flux-lock type high-Tc superconducting fault current limiter (SFCL). The flux-lock type SFCL consisted of two coils, which were wound in parallel each other through an iron core, and high-Tc superconducting (HTSC) element connected with coil 2 in series. The flux-lock type SFCL has the characteristics better in comparison with the resistive type SFCL because the fault current in the flux-lock type SFCL can be divided into two coils by the inductance ratio of coil 1 and coil 2. The fault current limiting operation of the flux-lock type SFCL can be different due to winding direction of the two coils. The winding method where the decrease of linkage flux between two coils in the accident happens is called the subtractive polarity winding and the winding method in case of the increase of linkage flux is called the additive polarity winding. The fault current limiting experiments according to the source voltage were performed for these two winding methods. Through the comparison and the analysis of the experimental data, we confirmed that the quench time was shorter, irrespective of the winding direction as the source voltage increased and that the fault current and the HTSC's resistance increased as the amplitude of the source voltage increased. The additive polarity winding made the fast quench time and the lower resistance of HTSC element in comparison with the subtractive polarity winding. The fault current of the subtractive polarity winding was larger than that of the additive polarity winding. In conclusion, we found that the additive polarity winding reduced the burden of SFCL because the quench time was shorter and the fault current was smaller than those of the subtractive polarity winding.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.59-79
• /
• 1998

전라남도와 경상남도는 강 하나를 사이에 둔 아주 가까운 이웃이며, 주민생활권이나 지역경제권이 상로연계성을 갖고 있다. 뿐만아니라 사회, 경제 문화와 보유자원의 여러 측면에서도 상로 본완적 성격을 갖고 있는 지역이다. 따라서 대승적 차원에서 볼 때 국토의 균형박전을 도모하고 진정한 동서화합을 위해 상로연계성을 갖고 있는 광양만, 진주권 광역새발을 공동으로 추진하여 동시화합의 대전기를 마련하는 계기로 삼아야 할 것이다. 이러한 차원에서 동서지역의 광역개발 필요성을 요약하면, 첫째, 최근 일정지역의 행정구역을 넘어서 인구와 물자 및 자원의 이용이 활발하게 이러나고 있어 통합적 계획 및 집행이 요구된고 있다. 따라서 광양만 진주권개발은 2개도에 걸쳐 광역개발권역을 설정한 우리나라 최초의 시범적인 계획으로써 세계적인 관심을 보이고 있다. 둘째, 국가경쟁력을 강화하기 위한 신산업지대의 조성과 연계교통망의 구축이 요망된다. 셋째 국토균형발전을 위해 수도권에 대응한 지방거점 도시권의 육성이 팽배하며, 넷째, 중북투자를 피하고 상호보완적인 기능을 극대화하여 진정한 동서화합에 대한 시대적 여청이 증대되고 있는 시절이다. 따라서 광양만 진주권 광역개발의 기본구상은 우선 경제적 물리적통합으로 실절적인 동서이익을 보색하는 차원에서 추진되어야 한다. 그리고 광양함을 국제물류의 중심지로 확충하고 주변지역에 대규모 물류 유통 및 국제기능을 유치하여 국제적 교류거점으로서의 기반 조성을 강화 하여야 한다. 또한 국제관광벨트 및 신산업지대의 형성과 함께 세계화 고속화에 걸맞는 교통기반시설을 정비하는 한편 자연친화적인 개발전략을 이룩함으로써 지구촌 경제하에시 지역균형개발과 지역의 국제경쟁역 확보차원에서 실현되어야 한다. 나아가 과양만권과 진주권의 경제 사회적인 통합을 달성함으로써 국민적 염원인 동서화합의 장으로 승화 발전 시킬 수 있도록 공간구조 및 기능의 분담배분이 요구된다. 기능은 동시지역을 연결하는 통합적인 기능 분담으로 과양만은 생산 및 물류지원기능의 강화와 전주 사천권은 첨단산업 연구 및 지원기능의 강화차원에서 배분이 요구된다. 이러한 광역개발계획이 세계적으로 추진될 때에 진정한 동서화합은 가능할 것이다. 따라서 진정한 도서화합을 유도하기 위해서는 광역개발을 실펀하기 위한 제도적인 협력체계의 구축이 요구된다. 동서지역의 광영개발을 위한 협력체계의 구축 방안은 첫째, 양 지역간에 협약제도르 도입함으로써 광역개발의 집행력을 강화하여야 한다. 즉, 개별 개발사업별로는 협약이 체결됨으로써 자치단체간의 역활분담이 분명하고 여차별 예산의 확보는 물론 사업시행이 구체화 될 수 있기 때문이다. 둘째는 양 자치단체간의 광역행정을 진담하는 기구의 절차가 필요한다. 광역개발 계획 추진 뿐만아니라 실질적으로 양권역이 공존공영을 위해 필요한 사업들을 추진 할 수 있도록 협의회 기능을 보완한 새로운 전담기구의 설치가 필요하다. 셋째. 광양만 진주권 광역개발 계획은 동서지역의 화합이라는 상징적인 의미를 지니고 있다. 따라서 중앙정부는 동서지역간의 진정한 화합을 유도하기 위해 제주도개발 특별법과 같은 �G동서지역개발 특별법�H을 제정하여 종합적이고 체계적인 개발을 유도 하여야 한다. 지역발전을 이룩할 수 있도록 자속적인 노력이 필요하다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.20-21
• /
• 2005

[ $BaZrO_3$ ], nanopowder was added to YBCO powder to make ($BazrO_3)_x(YBCO)_{(100-x)mol.-%}$ ($BZO_x$-YBCO) ($0{\leq}x{\leq}10$) composite targets fur pulsed laser deposition of superconducting layer in order to investigate the effect of the addition of BZO nanopowder in the YBCO target on the flux pinning properties of $BZO_x$-YBCO thin films. All the $BZO_x$-YBCO thin films were grown on single crystal STO substrate under similar conditions in the PLD chamber. The effect of YBCO targets doped with BZO on the flux pinning properties of $BZO_x$-YBCO thin films has been investigated comparatively. The isothermal magnetizations M(H) of the films were measured at temperatures between 5 and 80 K in fields up to 5 T, employing a PPMS. The optimal amount of BZO nanopowders in $BZO_x$-YBCO thin films to obtain the strongest flux pinning effects at high magnetic fields is about 6 mol.-%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5879-5884
• /
• 2013

With the rapid industrialization and economical development, the electricity demands of the industrial facilities and densely populated large cities are continuing to increase in Korea. The increase in the power consumption requires the extension of power facilities, but it is difficult to secure spaces for equipment installation in the limited space of urban areas. In addition, the 154 kV or 345 kV transmission systems in Korea has a short transmission distance, and are connected to one another in network structures that ensure the high reliability and stability of power supply. This structure reduces the impedance during the fault in power system, and increases the magnitude of in the short circuit fault current. The superconducting fault current limiter (SFCL) was devised to effectively address these existing problems. The SFCL is a new-concept eco-friendly protective device that ensures fast operation and recovery time for the fault current and does not need additional fault detection devices. Therefore, many studies are being conducted around the world. In this paper, based on the wiring method the initial fault current characteristics, current limiting characteristics, according to the incident angle and the change in inductance current limiting characteristics were analyzed in a multifaceted methods.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.17-20
• /
• 2005

The influence of $O_2$ partial pressure on saturation mgnetization, coercivity, anisotropy field and effective permeability (over 1GHz) of as-deposited Co-Fe-Al-O thin films, which were fabricated by RF magnetron reactive sputtering method, were investigated. The $Co_{69.9}Fe_{20.5}A_{14.4O_{5.2}$ thin film fabricated at $O_2$ partial pressure of 4% exhibits the best magnetic softness with saturation magnetization 4${$pi}$Ms of 18.1 kG, coercivity of 0.82 Oe, anisotropy field ($H_k$) of Oe, and effective permeability (${\mu}_{eff}$) about 1,024 above 1 GHz. the electrical resistivity of Co-Fe-Al-O thin films were increased with increasing $O_2$ partial pressure, the electrical resistivity of $Co_{69.9}Fe_{20.5}A_{14.4O_{5.2}$ thin film with the best soft magnetic properties was 560.7 ${\mu}{\Omega}$am. Therefore, It is assumed that the good soft magnetic properties of $Co_{69.9}Fe_{20.5}A_{14.4O_{5.2}$ thin film results from high electrical resistivity and large anisotropy field.