• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.405-415
• /
• 2000

Time series of wind-induced pressure on a structure are modeled using autoregressive moving average (ARMA) model. In an AR process, the current value of the time series is expressed in terms of a finite, linear combination of the previous values and a white noise. In a MA process, the value of the time series is linearly dependent on a finite number of the previous white noises. The ARMA process is a combination of the AR and MA processes. In this paper, the ARMA models with several different combinations of the AR and MA orders are fitted to the wind-induced pressure time series, and the procedure to select the most appropriate ARMA model to represent the data is described. The maximum likelihood method is used to estimate the model parameters, and the AICC model selection criterion is employed in the optimization of the model order, which is assumed to be a measure of the temporal complexity of the pressure time series. The goodness of fit of the model is examined using the LBP test. It is shown that AR processes adequately fit wind pressure time series.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.6
• /
• pp.56-64
• /
• 2001

In this paper, we proposed the simple and selective method for the order of model that reflected the feature of the heart rate variability without the complicated calculation in the power spectral analysis of heart rate variability using autoregressive model. The power spectral analysis of short-term of heart rate variability using autoregressive have been problem to resolution of spectral estimates by the selective model order. As a result that the proposed method for the order comparative tested with the AIC and the fixed order method, the calculation process could become very simple and select the order which correspond with the feature of the time series. We verified it could removed the noisy power components by the fixed order.

• Journal of KIISE
• /
• v.44 no.9
• /
• pp.954-965
• /
• 2017

A stable power supply is very important for the maintenance and operation of the power infrastructure. Accurate power consumption prediction is therefore needed. In particular, a university campus is an institution with one of the highest power consumptions and tends to have a wide variation of electrical load depending on time and environment. For this reason, a model that can accurately predict power consumption is required for the effective operation of the power system. The disadvantage of the existing time series prediction technique is that the prediction performance is greatly degraded because the width of the prediction interval increases as the difference between the learning time and the prediction time increases. In this paper, we first classify power data with similar time series patterns considering the date, day of the week, holiday, and semester. Next, each ARIMA model is constructed based on the classified data set and a daily power consumption forecasting method of the university campus is proposed through the time series cross-validation of the predicted time. In order to evaluate the accuracy of the prediction, we confirmed the validity of the proposed method by applying performance indicators.

• Journal of the Korean association of regional geographers
• /
• v.17 no.4
• /
• pp.432-442
• /
• 2011

Climatic variables such as temperature and precipitation tend to vary both in space and in time simultaneously. Thus, it is necessary to include space-time autocorrelation into conventional spatial interpolation methods for reliable time-series mapping. This paper introduces and applies space-time variogram modeling and space-time kriging to generate time-series temperature maps using hourly Automatic Weather System(AWS) temperature observation data for a one-month period. First, temperature observation data are decomposed into deterministic trend and stochastic residual components. For trend component modeling, elevation data which have reasonable correlation with temperature are used as secondary information to generate trend component with topographic effects. Then, space-time variograms of residual components are estimated and modelled by using a product-sum space-time variogram model to account for not only autocorrelation both in space and in time, but also their interactions. From a case study, space-time kriging outperforms both conventional space only ordinary kriging and regression-kriging, which indicates the importance of using space-time autocorrelation information as well as elevation data. It is expected that space-time kriging would be a useful tool when a space-poor but time-rich dataset is analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.96-105
• /
• 2019

Ocean reverberation is the most limiting factor in designing realistic and real-time system for sonar simulator. The simulation for an ocean reverberation requires a lot of computational loads, so it is hard to embed program and generate real-time signal in the sonar simulator. In this study, we simulate a time-domain bottom reverberation signal based on Harrison's energy-flux bottom reverberation model by applying Doppler effects as ship maneuvering and autoregressive model. Finally, the bottom reverberation signal with realistic characteristics could be generated for the simulation of ONR reverberation modeling workshop-I problem XI and East Sea ocean environments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.280-280
• /
• 2016

특정 자료의 시간의 흐름에 따른 예측치를 추정하는 방법으로 AR Model 즉, 자기회귀모형이 많이 사용되고 있다. AR Model은 변수의 현재 값을 과거 값의 함수로 나타내게 되는데, 이런 시계열 분석 모델을 사용할 때 매개변수의 추정 과정이 필수적으로 요구된다. 일반적으로 매개변수를 추정하는 방법에는 확률적근사법(stochastic approximation), 최소제곱법(method of least square), 자기상관법(method of autocorrelation method), 최우도법(method of maximum likelihood) 등이 있다. AR Model에서 가장 많이 사용되는 최우도법은 표본크기가 충분히 클 때 가장 효율적인 방법으로 평가되지만 수치적으로 해를 구하는 과정이 복잡한 경우가 많으며, 해를 구하지 못하는 어려움이 따르기도 한다. 또한 표본 크기가 작을 때 일반적으로 잘 일치하지 않은 결과를 얻게 된다. 우리나라의 강우, 유량 등의 자료는 자료의 수가 적은 경우가 많기 때문에 최우도법을 통한 매개변수 추정 시 불확실성이 내재되어있지만 그것을 정량적으로 제시하는데 한계가 있다. 본 연구에서는 AR Model의 매개변수 추정 시 Bayesian 기법으로 매개변수의 사후분포(posterior distribution)를 제공하여 매개변수의 불확실성 구간을 정량적으로 표현하게 됨으로써, 시계열 분석을 통해 보다 신뢰성 있는 예측치를 얻을 수 있으리라 판단된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.4
• /
• pp.334-340
• /
• 2002

This paper proposes a self-organizing fuzzy modeling which can create a new hyperplane-shaped cluster by applying multiple regression to input/output data with relatively large fuzzy entropy, add the new cluster to fuzzy rule base and adjust parameters of the fuzzy model in repetition. Tn the coarse tuning, weighted recursive least squared algorithm and fuzzy C-regression model clustering are used and in the fine tuning, gradient descent algorithm is used to adjust parameters of the fuzzy model precisely And learning rates are optimized by utilizing meiosis-genetic algorithm. To check the effectiveness and feasibility of the suggested algorithm, four representative examples for system identification are examined and the performance of the identified fuzzy model is demonstrated in comparison with that of the conventional fuzzy models.

• Water for future
• /
• v.9 no.2
• /
• pp.87-100
• /
• 1976

These studies are aimed at the analysis of systematic variation pattern of water resources in Korean river catchments and the development of their simulation models from the stochastic analysis of monthly and annual hydrologic data as main elements of water resources, i.e. rainfall and streamflow. In the analysis, monthly & annual rainfall records in Soul, Taegu, Pusan and Kwangju and streamflow records at the main gauging stations in Han, Nakdong and Geum river were used. Firstly, the systematic variation pattern of annual streamflow was found by the exponential function relationship between their standard deviations and mean values of log-annual runoff. Secondly, stochastic characteristics of annual rainfall & streamflow series were studied by the correlogram Monte Carlo method and a single season model of 1st-order Markov type were applied and compared in the simulation of annual hydrologic series. In the simulation, single season model of Markov type showed better results than LN-model and the simulated data were fit well with historical data. But it was noticed that LN-model gave quite better results in the simulation of annual rainfall. Thirdly, stochastic characteristics of monthly rainfall & streamflow series were also studied by the correlogram and spectrum analysis, and then the Model-C, which was developed and applied for the synthesis of monthly perennial streamflow by lst author and is a Markov type model with transformed skewed random number, was used in the simulation of monthly hydrologic series. In the simulation, it was proved that Model-C was fit well for extended area in Korea and also applicable for menthly rainfall as well as monthly streamflow.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.89-99
• /
• 2018

The purpose of this study is to analyse the determinants of the change in the welfare expenditure of local governments in 2015. This study analyzed the spatial correlation of welfare expenditure among neighboring local governments and determined the factors affecting the welfare expenditures. According to the results of the study, spatial correlation of welfare expenditure among local governments appears. Determinants, such as socio-economic factors, administrative factors, public financial factors are affecting the amount of the welfare expenditures, but local political factors, and local tax, last year's budgets are not correlated with the amount of local welfare expenditures. In this study, it is significant to found out that the spatial correlation of welfare expenditure among the local governments and to examine the determinants. If possible, it is necessary to analyze the time-series analysis using the multi-year welfare expenditure data, expecially self-welfare expenditures.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.149-156
• /
• 1995

This paper presents a method of detecting chatter vibration in end-mill process. The detecting system consists of an adaptive signal processing scheme which uses an autore- gressive time-series model and a neural network is proposed and is verified its effectiveness by using acceleration and cutting force signals recorded during slotting in end-mill operations. Expeerimental results indicate that the proposed system provides excellent detection when chatter is occured within the ranges of cutting conditions considered in this study and an effectiveness of the integration of signals is confirmed.