• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.569-579
• /
• 2005

An investigation for long-term strength characteristics of crushed sand concrete using crushed sands produced in Yang-san, Kim-hae and Jin-hae that can be assumed to respectively represent eastern, middle and western suburbs of Busan has been carried out. Concrete is composed of 70~80% of aggregates in whole volume so the effect of aggregates quality to the characteristics of concrete is very important. Since 1980s, aggregates used in concrete have already been substituted crushed stone because of the exhaustion of natural gravel and sand. Crushed sand tends to increase in using quantity because of the prohibition of sea sand picking and deterioration of river sand. Crushed sand is blended with river sand in order to investigate the quality changes and characteristics of concrete as variation of blend ratio of crushed sand (n, 50, 70, 80, 90, 100%). Slump and air content were measured to investigate the properties of fresh concrete. Unit weight, compressive strength and modulus of elasticity in age of 7, 28, 60, n, 180 days were measured to investigate properties of hardened concrete. Compressive strength, unit weight and modulus of elasticity were increased with a passage of time and they are expected to keep on increasing in long-term age as well. The experimental results of the qualifies of crushed aggregates in each producing area, were all satisfied with Korea Standard. The results of the measurement of slump exposed that slump preferably decreased as mixing rate increased till 70~80% but it increased to mixing rate 70~80%. The air content was exposed that it decreased by micro filler phenomenon according to that crushed sand b)ended ratio increased. According to the result of measuring unit weight in age of 7, 28, 60, 90, 180days, it increased in accordance with that blended ratio of crushed aggregates increases. As a result of measuring compressive strength and modulus of elasticity in age of 7, 28, 50, 90, 180days, compressive strength was highest when it is 70% of blended ratio.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.454-454
• /
• 2021

하천 환경에 대한 최근의 사회적 관심은 하천횡단구조물에 대한 평가를 기존의 이□치수적 관점에서 환경□생태학적 관점으로 변화시키고 있다. 이는 자연하천(특히 충적하천)이 수공구조물에 가로막히면 일반적으로 유사, 식생 등의 하천 제반 환경에 부정적인 영향을 준다는 전제에서 댐에 대한 평가가 시작되는 것으로, 국내에서는 이러한 인식의 변화가 2010년대 이후 널리 퍼지면서 현재는 더 이상 신규 댐을 건설할 수 없게 되었다. 댐에 의한 수리 특성과 기후 변화 등으로 댐 하류하천의 유사, 식생, 생태변화는 최근 급격하게 진행되었지만, 정량적인 변화량 및 지표 도출에 대한 연구는 대부분 최근의 data를 반영하지 못하고 있어 관련 원인과 대책 제시에 다소 한계가 있다고 생각된다. 이에 본 연구에서는 낙동강 주요 지류 중 하나이며, 충적하천인 황강을 대상으로 가용한 data를 활용하여, 합천댐 건설 전□후의 유사, 식생변화로 대표되는 하천 환경변화를 정량적으로 분석하고, 변화 원인을 파악하고자 하였다. 유사환경의 변화 분석은 댐 건설 전부터 최근까지의 문헌들에서 조사□제시된 data를 이용하였다. 연도별 최심 및 평균하상고는 댐 건설 전과 비교해 1.0 m가량 감소하였는데, 댐에 의한 세류사 공급차단보다는 골재 채취 및 하도 정비 등이 지배적인 원인인 것으로 파악되었다. 유사 입경의 변화는 댐 건설 전 대비 조립화가 진행되어 모래비율이 감소하고 유사 입경(댐 직하류 약 2배)이 증가하였다. 이는 골재 채취 및 댐에 의한 세류사 차단에 기인한 것으로, 준설된 지역의 하상이 모래 대신 자갈로 대체되고 있기 때문인 것으로 판단된다. 유사량의 경우 몇 번의 조사 과정이 있었으나, 기준이 명확하지 않아 정량적인 변화는 파악하기 어려웠다. 제외지의 식생 분포는 본 연구에서 개발한 이미지 처리 기법을 동원하여 분석하였으며, 대상은 합천댐 하류 중 모래 사주의 비율이 큰 곳을 선택(3지점)하였다. 분석 결과 2008~2011년 이전까지 큰 폭으로 사주가 식생 서식처로 변화(약 20%)되었으며, 이후 큰 변화 없이 안정화 된 경향을 보였다. 이는 2009~2011년 동안 식생이 활착되는 봄~초여름의 강우량 감소, 댐의 홍수조절 및 하상 조립화로 인한 다년생 식생의 활착되고 성장할 시간이 확보되면서 홍수 등 외부 변화에 대한 식생의 대응 능력이 증가했기 때문인 것으로 생각된다. 합천댐이 황강 환경변화에 주는 영향은 분명하지만, 현재 상황은 기후 변화와 인위적인 골재채취도 주요 원인으로 판단되는 바, 향후 하천 환경 개선 계획 수립 시 이러한 변화 원인이 고려된 대책이 수립되어야 할 것이다.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.185-204
• /
• 2024

This study was conducted for evaluation the geological, physical, and chemical properties of domestic sand by analyzing about 4,800 quality data of natural sand from river and land area surveyed until 2023 through the aggregate resource survey conducted by the Ministry of Land, Infrastructure and Transport. The average depth of the Quaternary unconsolidated sedimentary layer in Korea, which includes a sand layer, is about 10m (maximum depth 66m). The thickness of the sand layer within the sedimentary layer is most dominant in the range of 0.5m to 4.0m. This accounts for about 70% of the entire sand layer. In the sand layer, the ratio of sand, gravel, and clay is 60:20:10. Regardless of the provenance or geology, the sand is mainly composed of quartz, plagioclase, and K-feldspar, and the minor minerals are muscovite, biotite, chlorite, magnetite, epidote. The sand includes in 45~75% of quartz, 5~20% of plagioclase and K-feldspar, each other. And other minor minerals are included in 10%. The average grain size of sand is 0.5mm to 1.0mm, which accounts for 44% of sand samples. The water absorption rate and soundness are estimated to be suitable for aggregate quality standard in almost all sand, and the absolute dry density is suitable for 66%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.83-91
• /
• 2015

Porous concrete consists of cement, water and coarse aggregate and has been used for the purpose of decreasing the earth environmental load such as air and water permeability, sound absorption, etc. However, the physical and mechanical properties of porous concrete changes due to compaction load during construction. For such a reason, the purpose of this study is to investigate the physical and mechanical properties of porous concrete according to the kinds of binder, the ratio of water to binder and target void ratio. In particular, this study has been carried out to investigate the influence of compaction load on the void ratio, strength and coefficient of permeability. Aggregate used in this study are by-products generated during production of crushed gravel with a maximum size of 13mm. The results of this study showed that the target void ratio, the coefficient of permeability and compressive strength of porous concrete had a close relationship with the void ratio, and it will be possible that the void ratio is suggested by the mix design of porous concrete. The compressive strength of porous concrete was the highest at the content of the expansive admixture of 5% and compared to non-mixture, 10% mixture of silica fume improved compressive strength about 32%. And in the result of the study to change the compaction load, the compressive strength increased from the load of 15kN, the void ratio decreased from the load of 0.8kN, the coefficient of permeability decreased from the load 35kN, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.5
• /
• pp.47-59
• /
• 2022

A series of experiments were performed to investigate the design and application of a rubble-ground modification method with grout injection. A small-sized injection machine was designed, and the grouts with various mix proportions were injected into 25 mm aggregate using the designed small-sized injection machine. With the compressive strength of the grout ranging from 20 to 80 MPa, the uniaxial compressive strength of the grout-filling bodies with clean gravels was higher than 1/6th of the strength of grouts themselves. However, this fraction may reduce depending on the interface conditions. The erosion resistance of the hardened grout was evaluated, and it was determined that the grout with a strength greater than 15 MPa did not require erosion consideration. Moreover, a full-scale injection test was performed for 25 cm-sized rubbles in cages with a diameter greater than 1 m and a height of 1.2 m to evaluate the filling characteristics of the grout. Results from this test indicated that the grout flowability sensitively influenced the filling characteristics.

• The Korean Journal of Quaternary Research
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2002

Analysis of No. 199∼145 cross-sections set up by the Ministry of Construction (1978) in the middle reaches of the Sumjin River around Sunchang, Daegang, and Goksung areas have been done for delineating the changes In fluvial geomorphic features. The entire river-bed in the study area has been considerably degraded since 1978. In some cross-sections, the thalweg shillings are observed. Two aspects are responsible for the erosion-dominant environment. First, flow velocity has been increased. Human activities including wetland destruction, ex-channel destruction and artificial levee construction reduced the channel width, and fixed the channel geometry. This has resulted in increase of the water velocity. Pebble and granule∼coarse sand are prevailing on the river-bed, indicate the high speed of the currents. Second, aggregate has been intensively mined during 1980s∼1990s around the areas. Especially, in the right side of the cross-sections No. 188∼187 and the left side of the cross-section No. 155, erosion toward under the artificial levee is remarkable. This can be led to bank failure in case of heavy rainfall.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.342-342
• /
• 2012

이론적으로 하천의 흐름은 시간과 위치에 따라 수위와 유량의 관계가 일대일로 대응한다는 가정을 두지만, 실제 하천은 여러 가지 통제요인에 의해 다양하게 변화한다. 특히 하천 상 하류 일부구간에서 인공적인 골재채취나 준설작업과 같은 하도공사가 이루어진다면 하천의 흐름은 일시적인 수위변화가 아닌 단면의 변화 나아가 수위에 따른 유량의 증가 및 감소를 일으키게 된다. 또한 모래하상이나 식생의 영향을 받는 하천의 경우에도 빈번한 단면 및 유속의 변화를 볼 수 있다. 본 연구에서는 2007년부터 2011년까지 유량조사사업단에서 측정이 이루어진 4개 수계 577개 지점을 대상지점으로 선정하고, 이들 중 2개년 이상 측정이 이루어져 단면변화 및 지점의 수리특성 여부를 비교할 수 있는 한강 55개, 낙동강 49개, 금강 43개, 영산강 55개 지점의 수위-유량관계 변화여부를 검토하였다. 본 연구는 경년변화 없이 일정한 수위-유량관계를 보이거나 보와 같은 단면 통제에 의해 단순한 기간분리가 발생되는 지점, 4대강 공사가 진행 중인 지점, 미미한 단면변화에 의해 저수위의 수위-유량관계가 변화된 지점들은 분석 대상에서 제외하고, 중수위 이상에서 수위와 유량의 관계가 변화하는 지점들을 찾아 그 원인을 파악하고 사례를 분석하는데 중점을 두었다. 검토 결과 중수위 이상에서 수위-유량관계가 변화되는 요인으로 크게 상류와 하류에서 하천준설을 실시하여 수위에 따른 에너지선의 증가 및 감소를 일으킨 경우와, 제방공사에 의해 고수위가 변화가 발생되었거나 그 해에 배수영향을 받았는지 여부 또는 하도에 자생하는 식생의 영향 그리고 모래 및 자갈하천에서 발생되는 큰 단면변화 등으로 나타났다.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.40-46
• /
• 2013

Based on Korean railway design standards, the thicknesses of the reinforced roadbeds of conventional and high speed railways are different, and so too, for the size distribution of the ballast particles. Accordingly, considerable cost would be required to increase operating speeds of conventional lines, in particular related to changing from a ballasted track system to a ballastless one. In this study, applicability of a roadbed which supports conventional ballasted track, for use as a ballastless track for a high speed rail line was examined. A reinforced roadbed for a conventional railway is 20cm thick, and the type of material used for a conventional reinforced roadbed is M-40 (crushed gravel for road embankments). A dynamics test was conducted to evaluate the occurrence of the permanent settlement of the track substructure. These results suggest that, without changes to the track substructure, an operational speed of 400km/h is feasible with a ballastless track. This result; however, is from laboratory experiments. Further studies, such as numerical analyses or field validation, are required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.157-163
• /
• 1993

The present study focuses on simulating river profile changes downstream of the Daecheong multipurpose dam by using the computer program HEC-6, which was developed by the United States Army Corps of Engineers. The dam locates at the Keum river, a typical alluvial stream, whose bed material is composed mostly of fine and medium sands. The study reveals that after the completion of dam, a 15 km long reach downstream from the regulatory dam was severely degraded by about 2~3 m. No further severe degradation of this reach is expected, however, because the river-bed of this reach has been well armored since then with gravels and cobbles. Some places in the study reach were degraded locally by 2 m, due mainly to the large-scale gravel mining activities in that reach. On the other hand, a 20 km long reach in downstream study reach is aggraded more or less by 0.5~1 m. Calculation by the computer program HEC-6 is close to measurement for the study river reach. According to the results by HEC-6, the study river reach would remain generally stable in the future, except a few places in the mid-upstream where further river-bed degradation of 1~2 m would occur and a few places in the far downstream where local river-bed aggradations of about 0.5 m would occur.