한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제19권3호
  • /
  • Pages.83-91
  • /
  • 2015
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

배합조건 및 다짐하중에 따른 포러스 콘크리트의 특성에 관한 실험적 연구

An Experimental Study on the Properties of Porous Concrete according to the Mix Factors and Compaction Load

  • 임서형 (경남과학기술대학교 건축공학과)
  • 투고 : 2014.08.06
  • 심사 : 2014.12.23
  • 발행 : 2015.05.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

포러스 콘크리트는 시멘트, 물 그리고 굵은골재로 구성되어 있으며, 공기 및 물의 투과 그리고 흡음 등 지구 환경부하를 저감시키기 위해 사용되어 왔다. 그러나 포러스 콘크리트의 물리적, 역학적 성상은 시공시 이루어지는 다짐하중에 의해 변한다. 따라서 본 연구에서는 결합재 종류, 물-결합재비, 목표공극율에 따른 포러스 콘크리트의 물리적, 역학적 성상을 파악하였으며 특히, 다짐하중에 따른 포러스 콘크리트의 공극율, 강도, 투수계수의 물성변화를 파악하였다. 본 연구에서 사용한 골재는 부순자갈 생산과정에서 발생되는 부산물로서 최대크기는 13mm이다. 연구결과, 포러스 콘크리트의 목표 공극율, 투수계수, 압축강도는 공극율과 밀접한 상관성을 지니고 있으며, 공극율은 포러스 콘크리트의 배합설계로 제시할 수 있는 가능성이 있는 것으로 판단되다. 포러스 콘크리트의 압축강도는 팽창재 치환율 5%에서 가장 높게 나타났으며, 실리카 흄 치환율 10%에서 치환하지 않은 콘크리트보다 32% 높게 나타났다. 그리고 다짐하중을 변화시킨 본 연구결과 압축강도는 하중 15kN부터 증가하였고, 공극율은 하중 0.8kN부터, 투수계수는 하중 35kN부터 각각 감소하는 것으로 나타났다.

Porous concrete consists of cement, water and coarse aggregate and has been used for the purpose of decreasing the earth environmental load such as air and water permeability, sound absorption, etc. However, the physical and mechanical properties of porous concrete changes due to compaction load during construction. For such a reason, the purpose of this study is to investigate the physical and mechanical properties of porous concrete according to the kinds of binder, the ratio of water to binder and target void ratio. In particular, this study has been carried out to investigate the influence of compaction load on the void ratio, strength and coefficient of permeability. Aggregate used in this study are by-products generated during production of crushed gravel with a maximum size of 13mm. The results of this study showed that the target void ratio, the coefficient of permeability and compressive strength of porous concrete had a close relationship with the void ratio, and it will be possible that the void ratio is suggested by the mix design of porous concrete. The compressive strength of porous concrete was the highest at the content of the expansive admixture of 5% and compared to non-mixture, 10% mixture of silica fume improved compressive strength about 32%. And in the result of the study to change the compaction load, the compressive strength increased from the load of 15kN, the void ratio decreased from the load of 0.8kN, the coefficient of permeability decreased from the load 35kN, respectively.

키워드

참고문헌

  1. Back, Y. K., Kim, J. H., Yoo, B. J., and Kang, S. P., Park, S. G., Kim, M. H. (2000), An Experimental Study on the Theoretical Void Ratio and the Replacement Proportion of Silica Fume for the Strength Development of Porous Concrete, Proceeding of Conference in Architectural Institute of Korea, 275-278.
  2. Cho, S. B., Kim, H. C., Kwak, B. H., Ng, N. T., and Kwon, H. M. (2004), Properties of Porous Concrete with Pressurized Compaction Method, Proceeding of Conference in Korea Concrete Institute, 656-659.
  3. Choi, J. J., Yu, H. J. (2009), Coefficient of Permeability in Permeable Concrete by the Testing Methods, Proceeding of Conference in Korea Concrete Institute, 281-282.
  4. Choi, J. J., Yu, H. J. (2009), Effect of Compacting Conditions on the Property of Permeable Concrete, Proceeding of Conference in Korea Concrete Institute, 271-272.
  5. Japan Concrete Institute (1995), Technical committee on ECO concrete, Japan Concrete Institute, 56-58.
  6. Kim, M. H., Baik, Y. K., Kang, S. P., and Kim, Y. R., Kim, J. H. (2001), Fundamental Properties of Porous Concrete According to the Size of Aggregate, Journal of the Korea Concrete Institute, 13(5), 438-446. https://doi.org/10.22636/JKCI.2001.13.5.438
  7. Kim, M. H., Kim, G. Y., B, Y. K., and K, J. H., (2000), Influence of Mix Factors and Mixing Ratio of Aggregate of Porous Concrete, Journal of the Korea Concrete Institute, 12(6), 91-98. https://doi.org/10.22636/JKCI.2000.12.6.91
  8. Lee, Y. O., Yun, H. D. (2010), Effects of Expansive Admixture on the Mechanical Properties of Strain-Hardening Cement Composite (SHCC), Journal of the Korea Concrete Institute, 22(5), 617-624. https://doi.org/10.4334/JKCI.2010.22.5.617
  9. Moon, H. Y., Kim, S. S., Jung, H. S., (1998), An Experimental Study of Permeable Concrete Pavement for Application, Magazine of the Korea Concrete Institute, 10(3), 165-172. https://doi.org/10.22636/MKCI.1998.10.3.165
  10. Park, S. B., Seo, D. S., Lee, J. (2004), A Study on the Sound Absorption Properties of Porous Concrete by Recycled Aggregate Contents and Target Void Ratio, Journal of the Korea Concrete Institute, 16(4), 541-548. https://doi.org/10.4334/JKCI.2004.16.4.541
  11. Song, J. L., Park, S. B., Seo, D. S., L, J., and Jand Y. I. (2006), The Study on the Physical and Mechanical Properties of Porous Concrete according to Compaction Method, Proceeding of Conference in Korea Concrete Institute, 813-816.
  12. Yoon, S. H., Jung, K. H., Lee, Y. D., and Jung, S. J. (2003), An Experimental Study on Application of Side Walk Concrete Slabs using Porous Concrete, Journal of the Architectural Institute of Korea, 19(12), 139-146.