• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.561-568
• /
• 2021

In this study, in order to observe the change in the amount of Tire and Road Wear Particles and the ratio of tire components in it according to the tire wear resistance performance, carried out the evaluation by varying the vulcanization reaction design of the tire tread rubber. In addition, in order to improve the reliability of the evaluation of Tire and Road Wear Particles, the evaluation was performed indoor laboratory test equipment that simulates the condition on real driving to exclude various environmental influences including minerals, driver's habits, road surface, weather, tire structure and pattern designs. After the evaluation in closed space, it is estimated that the amount of collected Tire and Road Wear Particles is 84% compared to 100% of the tire and road wear loss weight, of which 96.4~97.7% was around the road and 2.3~3.6% was in the air. As a result of analy sis of the collected Tire and Road Wear particles, the tire component existed 63~75% in the Tire and Road Wear Particles depending on the wear resistance performance of the tire.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.105-110
• /
• 2019

Effect of height on the size and shape of carbon nanotube (CNT) aggregates in the freeboard region of a bubbling fluidized bed ($0.15m\;i.d.{\times}2.6m\;high$) has been determined. Feret diameter and Heywood diameter of the CNT aggregates in the freeboard region of fluidized bed increased with increasing gas velocity. The average aggregate diameters and CNT particle number in the aggregates decreased with increasing of height in the freeboard. Aspect ratio increased as the location was closer to the surface of the dense phase, but decreased at the highest location. Solidity did not show any significant changes with height. The results showed the aggregates formation process is affected by the height in the freeboard. A correlation was proposed to predict the Heywood diameter of the CNT aggregates.

• Particle and aerosol research
• /
• v.10 no.4
• /
• pp.131-136
• /
• 2014

The importance of waste treatments is increasing because of the lack of resources and environmental problems resulted from economic growth policy. Especially, the pollutant dust which is one of the wastes should be treated considerately because it could cause secondary damages on the human health as well as environmental systems. Recently, massive amount of coal fly-ash is being produced in thermoelectric power plants. In this study, we compared two general methods used in estimating the amount of unburned carbon in fly-ashes to categorize the coal fly-ashes into several groups following their carbon contents. One is the "loss on ignition(KS L 5405) method" which estimates the change of mass after combustion, and it is generally used. Another one is measuring $CO_2$ gas content by burning solid carbon in the fly-ash, and it is called "$CO_2$ analysis method."

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.239-246
• /
• 2021

Characteristics of hydrodynamics and heat absorption by gas in a directly-irradiated fluidized bed particle receiver (50 mm-ID X 150 mm high) of SiC particles have been determined. Solid holdups of SiC particles show almost constant values with increasing gas velocity. Fine SiC particles (SiC II; dp=52 ㎛, ρs=2992 kg/㎥) showed low values of relative standard deviation of pressure drop across bed but high solids holdups in the freeboard region compared to coarse SiC particles (SiC I; dp=123 ㎛, ρs=3015 kg/㎥). The SiC II exhibited higher values of temperature difference normalized by irradiance due to the effect of additional solar heat absorption and heat transfer to the gas by the particles entrained in the freeboard region in addition to the efficient thermal diffusion of the solar heat received at bed surface. Heat absorption rate and efficiency increased with increasing the gas velocity and fluidization number. The SiC II showed maximum heat absorption rate of 17.8 W and thermal efficiency of 14.8%, which are about 33% higher than those of SiC I within the experimental gas velocity range.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.35-36
• /
• 2000

교통수단의 발달과 경제활동이 활발해짐에 따라 많은 오염문제가 발생하였는데, 특히 대도시를 중심으로 증가한 차량과 경제활동에 필요한 에너지 소비의 증대로 대기오염의 심각성은 더욱 커지게 되었다. 일반적으로 대기중 부유 분진의 발생원은 토사의 재 비산이나 해염 입자, 화분 등과 같은 자연적인 발생원과 산업시설, 소각시설, 가정난방, 수송수단의 이용 등의 인간활동에 의한 인위적인 배출원으로 대별되며 인위적인 배출원의 영향은 자연적 발생원에 비해 그 영향이 보다 폭넓고 중요하게 다루어지고 있으며, 특히 화석연료의 연소와 관련 있는 각종 산업시설의 증가 및 대형 디젤 자동차의 급격한 증가는 대기 중 부유분진의 농도를 증가시키는 중요한 요인이 되고 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.343-344
• /
• 2003

도시 내에는 한정된 공간에서의 토사의 비산먼지, 해염입자 등 자연 발생원에서 유래하는 오염물질과 각종 화학물질 사용증가, 도시의 인구 집중화, 산업 및 난방시설과 자동차 교통량의 증가 등 인위적인 발생원에서 유래하는 많은 오염물질들이 다량으로 대기중에 방출되어 대기질이 악화되고 있다. 먼지는 입경에 따라 크게 2가지로 구분할 수 있다. 즉 공기중에 부유하고 입경이 작은 부유먼지와 입경이 크고 자연상태로 지상에 낙하하는 강하먼지가 있다. (중략)

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.740-745
• /
• 2000

Effects of porous fences on the wind erosion of sand particles from a triangular pile were investigated experimentally. The porous fence and sand pile were installed in a simulated atmospheric boundary layer. The mean velocity and turbulent intensity profiles measured at the sand pile location were well fitted to the atmospheric boundary layer over the open terrain. Particle motion was visualized to see the motion of windblown sand particles qualitatively. In addition, the threshold velocity were measured using a light sensitive video camera with varying the fence porosity ${\varepsilon}$. As a result, various types of particle motion were observed according to the fence porosity. The porous wind fence having porosity ${\varepsilon}=30%$ was revealed to have the maximum threshold velocity, indicating good shelter effect for abating windblown dust particles.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.93-96
• /
• 2012

In the industrial furnaces or reactors, entrainment of the material particles is one of the important issues from the point of view of efficient material-use. The particles of solid phase which has submicron unit are easily entrained with gas phase as a reacting agent or product, and it causes a loss of the material. In this study, wind-tunnel experiment is carried out to interpret the distribution of the particles entrained along the tunnel length. Through CFD-based computational analysis of the experiment, availability of result from the CFD analysis associated with particle size distribution and gaseous velocity to practical system is evaluated.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.33-34
• /
• 2002

교통수단의 발달과 경제활동이 활발해짐에 따라 많은 오염문제가 발생하였는데, 특히 대도시를 중심으로 차량과 경제활동에 필요한 에너지 소비의 증대로 대기오염의 심각성은 더욱 커지게 되었다. 일반적으로 대기중 분진의 발생원은 토사의 재비산이나 해염입자, 화분 등과 같은 자연적인 발생인과 산업시설, 소각시설, 가정난방, 수송수단 이용 등의 인간활동에 의한 인위적인 배출원으로 대별된다. 그런데 환경오염 측면에서 보면 인위적인 배출원의 영향은 자연적 발생원에 비해 그 영향이 보다 폭넓고 중요하게 다뤄지고 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.247-248
• /
• 2002

교통 수단의 발달과 경제활동이 활발해짐에 따라 많은 오염 문제가 발생하였는데, 특히 대도시를 중심으로 차량과 경제활동에 필요한 에너지 소비의 증대로 대기 오염의 심각성은 더욱 커지게 되었다. 일반적으로 대기중 분진의 발생원은 토사의 재비산이나 해염입자, 화분등과 같은 자연적인 발생원과 산업시설, 소각시설, 가정난방, 수송수단 이용 등의 인간 활동에 의한 인위적인 배출원으로 대별된다. (중략)