• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.1
• /
• pp.105-113
• /
• 1995

Procedures for isolatin of chitin have been developed from crab(Chionoecetes opilio) shell waste with 26. 65% chitin on a dry basis. Optimal conditions for demineralization of crab shell were 1N HCl at ambient temperature for 30min with a solids to solbent ratio of 1 : 15(w/v). Optimal deproteinization involved treatment with 5% NaOH at $65^{\circ}C$ for 1 hr with a solids to solvent ratio of 1 : 15(w/v). Effective decoloration was achieved by bleaching with 0.32% sodium hypochlorite solution for 3min with a solids to solvent ratio of 1 : 10(w/v). Particular attentin was given to characterization of the physicochemical properties of the crab chitin. Chitins, from four different mesh sizes of crab shell, did not show significant differences in nitrogen and ash compositions. Bleaching decreased the viscosity of chitin but did not affect its solubility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.266-270
• /
• 2018

원자력 방사능 폐기물 또는 원자력 발전소 해체시 발생 가능한 세슘 이온은 인체뿐만 아니라 생태계 환경에도 큰 악영향을 미친다고 알려져 있다. 이러한 세슘 이온은 자연 속으로 손쉽게 스며들어 발생한 지역뿐만 아니라 쉽게 퍼지게 되어 넓은 지역까지 피해를 주게 되며, 반감기가 30년으로써 한번 자연계에 누출되면 장시간 잔존하여 인간 및 생태계에 악영향을 미치게 된다. 세슘이온이 몸속에 들어오게 되면 장에서 몸으로 100% 흡수되며 내장에 축척되어 연조직 전체에 분포하게 되며 갑상선 암과 같은 심각한 위험에 초래하게 된다. 2011년 발생한 후쿠시마 원전 사고 이후 국내에서도 많은 관심을 가지기 시작하였으며, 따라서 수중의 세슘이온을 제거하기 위하여 나노 입자 형태의 기능성을 가진 물질들을 적용한 많은 연구가 이루어지고 있다. 이러한 나노물질들은 수중의 세슘이온 제거에 대하여 우수한 제거효율을 보여주고 있으나 나노 입자 특성상 사용 이후 회수가 어려워 기능성 물질들의 확산 및 축적에 따른 2차 환경오염의 문제점까지 발생하게 된다. 최근 수처리 분야에서 외부 자기장을 주게 되면 자성을 띄게 되는 물질인 자성체에 대한 관심이 급등하고 있다. 이러한 자성체들은 수중에서 별도의 회수 시스템 없이 자성으로 인하여 완벽히 자기분리 된다. 세슘제거에 탁월한 기능성 물질과 완벽한 자기분리가 가능한 자성체를 결합하여 특별한 회수장치 없이 외부 자기장만 주어진다면 수중의 세슘을 효과적으로 제거 또는 처리할 수 있다. 자성체 입자 표면에 흡착제인 프러시안 블루나 제올라이트와 같은 흡착제를 합성하여 수중의 세슘을 제거하는 연구가 활발히 이루어지고 있다. 그러나 기존의 자성체보다 좀 더 높은 자성을 가지고 있으며 외부 자기장에 의해 강하게 반응을 한다고 알려져 있는 강자성체(Ferromagnetic)를 사용하게 된다면 흡착제와 결합 이후 더욱더 강한 자성을 가진 흡착제가 탄생하며 이를 사용하면 높은 처리율뿐만 아니라 높은 슬러지 회수율을 가질 수 있다. 따라서 본 연구는 흡착제나 이온교환수지와 같은 기능성 물질을 사용하여 수중의 세슘을 제거하는 메커니즘과 강자성체가 가지고 있는 강한 자성의 성질을 결합한 복합체 제조에 대한 연구조사를 중점적으로 실시하였다. 본 연구에 의해 연구 조사된 결과를 바탕으로 수중의 세슘 이온에 대하여 높은 제거효율과 회수율을 가지는 새로운 형태의 복합체 제조에 관한 정보를 제공하고자 한다.

• Particle and aerosol research
• /
• v.9 no.2
• /
• pp.39-50
• /
• 2013

Real-time aerosol measuring instruments have been widely used for the measurement of atmospheric aerosol, diesel particulate matter, or material synthesis. A scanning mobility particle sizer (SMPS) measures the number size distribution of particles using electrical mobility detection technique. An aerodynamic particle sizer (APS) is used to determine the number concentration and the mean aerodynamic diameter of test particles. An electrical low-pressure impactor (ELPI) is a multi-stage impaction device to separate airborne particles into aerodynamic size classes using particle charging and electrical detection techniques. In this study, the performance of these instruments were evaluated to assess their ability to obtain mass concentrations from particle number concentration measurements made as a function of particle size. The effect of determination of particle density on the measurement of mass concentration was investigated for the three instruments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.331-331
• /
• 2012

InGaN/GaN 양자우물 LED소자의 내부양자효과 및 외부양자효과를 높이기 위해 많은 연구자들이 노력을 하고 있다. InGaN/GaN 양자우물 전광소자의 효율을 높이는 방법으로는 무분극 박막성장을 이용한 양자우물의 운반자 파동함수의 분리를 감소시키는 방법, 양자우물 위에 전자 차단층을 성장시키는 방법, 박막의 비발광 결함을 감소시키는 방법, 나노박막 또는 나노 입자를 이용한 표면 플라즈몬 효과를 이용하는 방법 등이 있다[1-3]. 본 연구에서는 은(Ag) 나노입자를 이용하여 InGaN/GaN 양자우물과 p-GaN 덮개층을 패턴에칭한 후, 그 위에 Ag 나노입자를 도포하여 표면 플라즈몬 효과를 이용한 InGaN/GaN 양자우물의 발광효율을 높이고자 하였다. c-면 방향의 사파이어에 유기화학금속증착법(MOCVD)으로 n-형 GaN를 2.0 ${\mu}m$ 성장한 후 그 위에 InGaN/GaN 양자우물 5층을 성장하였다. 또한 전자 차단층으로 AlGaN를 7 nm 증착한 후, p-type GaN를 100 nm 성장하였다. p-type GaN를 패턴하기 위해 포토리소그래피 와 유도결합 플라즈마 에칭공정을 거쳐 선 패턴을 형성하였는데, 이 때 에칭된 p-GaN 깊이는 약 90 nm 이었다. 에칭한 패턴크기가 LED소자의 전기적 및 광학적 특성에 미치는 영향을 알아보기 위해 전류-전압 측정과 photoluminescence 측정을 하였다. 그 후 급속열처리방법을 이용한 Ag 나노입자 형성과 표면플라즈몬이 소자의 발광효율에 미치는 영향에 대해 조사하였다.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.169-172
• /
• 2010

Silver ions of poly(vinyl chloride)-g-poly(styrene sulfonic acid) (PVC-g-PSSA) graft copolymer were reduced to form silver nanoparticles under thermal condition ($80^{\circ}C$). We were successful in synthesizing silver nanoparticles with various morphologies by changing reaction time. At short reaction times (~1 h), silver nanoparticles with 5 nm in size were formed without disrupting a microphase-separated structure of graft copolymer. At medium reaction times (~5 h), silver nanoparticles were aggregated to form large clusters ranging 30~50 nm in size. At much longer reaction times (~18 h), hurricane-like silver clusters were observed due to strong particle aggregation.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1069-1074
• /
• 2008

In this work, we made a study for the 3D SAM formation of octanethiol, decanethiol, and dodecanethiol on copper nanoparticles and we verified stability of the copper particle depending on the ratio of dodecanethiol to copper. The reaction was performed in a one-phase system under nitrogen atmosphere and the thiolated copper particles could be obtained by centrifugation. We could confirm that the nanoparticles consisted of a spherical shape of 3~6 nm from TEM images. FT-IR, XPS and TGA results showed that alkanethiols were chemisorbed via thiol group and the packing density of the alkanethiols on copper surface increased with the alkyl chain lengths. XRD patterns gave us useful information about superlattice formations. Finally, $Cu_2O$ was formed when the molar ratio of dodecanethiol to copper is less than unity and copper nanoparticles formed more compact 3D SAMs when the molar ratio of dodecanethiol to copper was 1.25.

• Water for future
• /
• v.27 no.3
• /
• pp.115-121
• /
• 1994

Cohesie sediment movement in estuarine systems is strongly affected by the phenomena of aggregation and flocculation. Aggregation is the process where primary particles are clustered together in tightly-packed formations; flocculation is the process where aggregates and single particles are bonded together to form large particle groups of very low specific density. The size, shape and strength of the flocculants control the rate of deposition and the processes of pollutant exchange between suspended sediments and ambient water. In estuarine waters, suspended sediments above the lutocline form the mobile suspension zone while below the lutocline they form the stationary suspension zone. Suspended particles in the mobile zone are generally in a dispersed state and the controlling forces are the Brownian motion and the turbulent flow fluctuations. In the stationary suspension zone, the driving force is the gravity. This paper discusses the settling and particle flocculation characteristics under quiescient flow conditions. Particles are entering the study domain randomly. Particles in the mobile suspension zone are simulated by using the Smoluchowski's model. Flocs created in the mobil suspension zone are moving into the stationary suspension zone where viscosity and drag effects are important. Utilizing the concepts of the maximum Feret's diameter and the Minkowski's sausage logic, the fractal dimension of the flocs within the stationary suspension is estimated and then compared with results obtained by other studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.181-187
• /
• 2016

Silica is an essential material in the electronics industries of LCDs and OLEDs, which particularly require high purity. This study attempted to find the optimal design of a magnetic separator for silica sand containing iron compounds using CFD simulation. Three designs of magnetic separation were prepared and their efficiency was examined. As a result of the evaluation, the sufficient contact of particulate silica with the surface of magnetic emitters improved the magnetic separation effects. In addition, the loss of $SiO_2$ and the removal rate of $Fe_2O_3$ depended strongly on the particle size, flow rate and magnetic flux density. In addition, magnetic separation is quite effective for a particle size of $10{\mu}m$ with a 0.2 m/s flow rate.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.778-784
• /
• 2017

Membranes were prepared by incorporating Na-Y zeolite particles into poly(vinyl alcohol) (PVA) cross-linked with poly(acrylic acid) (PAA). The membrane was characterized by FT-IR spectroscopy, contact angle measurement, swelling test, SEM analysis, and XRD analysis. The pervaporation separation of water/acetic acid mixtures was carried out using prepared membranes. From the results, it was shown that the hydrophilic property of prepared membrane increased with increase of zeolite contents and the PVA/PAA membrane with zeolite addition showed higher permeation flux than that of without zeolite membrane. The PVA/PAA membrane containing 8 wt% zeolite showed the highest permeation flux and separation in the feed solution containing 10 wt% acetic acid.

• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.167-172
• /
• 2012

In order to analyze the formation mechanism of iron oxide nanoparticles, we measured the heat flow of $Fe(OL)_3$ precursor with temperature, and TEM images and AC susceptibility of aliquots samples sequentially taken from the reaction solution, respectively. The thermal decomposition of two OL-chain from $Fe(OL)_3$ produced the Fe-OL monomer, which were contributed to the formation of iron oxide nanoparticles. In the initial stage of nanoparticles formation, the small iron oxide nanoparticles had ${\gamma}-Fe_2O_3$ structure. However, as the iron oxide nanoparticles were rapidly growth, the iron oxide nanoparticles showed ${\gamma}-Fe_2O_3$-FeO core-shell structure which the FeO layer was formed on the surface of ${\gamma}-Fe_2O_3$ nanoparticles by insufficient oxygen supply from the reaction solution. These nanoparticles were transformed to $Fe_3O_4$ structure by oxidation during long aging time at high temperature. Finally, the $Fe_3O_4$ nanoparticles with high saturation magnetization and stable in the air could be easily synthesized by the thermal decomposition method.