• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.141-147
• /
• 2006

A newly designed floating breakwater made of Polyethylene with considering the introduction of new material for being harmony with environment and stability of the floater is developed for a marine ranching. In this study, the new concept in which incident wave dissipates its energy due to the vortex shedding by passing through the pipes and sheets is selected for wave breaking mechanism. Model experiment in order to te st its capability is performed for the regular and irregular waves in ocean engineering basin. Good capability to break the incident wave within the 6 seconds of period and 1 m of height is shown. Breaking efficiency for long period wave is not so good in regular and irregular wave. The results of this study will contribute to the design and construction of the floating breakwater.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.95-104
• /
• 2002

The theoretical and analytical studies on dynamic signals(force and acceleration signals) measured at SPT rod are actively made. In this paper, the characteristics of stress wave(force signals) in SPT rod were studied experimentally using model rod system. It was noted that the amplitude ratios of reflected wave over incident wave in different end conditions were well matched with theoretical results. The impedance of soil could be determined if the characteristics of incident and reflected waves could be evaluated quantitatively in situ SPT test. On the other hand, the results of model tests showed that the effect of reflected wave caused by side friction was negligible, and therefore, the analysis model considering only end resistance of sampler could be applicable in dynamic analysis of SPT.

• Water for future
• /
• v.19 no.3
• /
• pp.259-266
• /
• 1986

A numerical study of the process of wave deformation, such as reflection and transmission coefficients and wave forms with bottom change was carried out by Boundary Element Method using linear elements. It is assumed that the incident wave is normal and oblique to the bottom and the wave may be described by linear theory The accuracy of the computational scheme is investigated by comparing the results of other researchers in the following several cases. (1) Simple and sloping stepped bottom geometry (2) Submerged breakater type bottom geometry (3) Trench type bottom geometry

• Water for future
• /
• v.20 no.1
• /
• pp.49-54
• /
• 1987

A numerical analysis of the characteristics of wave reflection over rippled beds (sand bars) was carried out By Boundary Element Method(B.E.M) using linear elements. It is assumed that the incident wave is normal and oblique to the rippled beds and the wave may be and the escribed by two-dimensional linear theory. The accuracy of the computational scheme is investigated by comparing the laboratory data, the analytic measured results of the other researchers. The B.E.M results for the normal incident wave is held for the mechanism of the resonant Bragg reflection at the point where the wave length of the bottom undulation is one half the wave length of the surface wave.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1429-1433
• /
• 2004

본 연구에서는 쇄파대에서 정현파의 쇄파에 대해 수리모형실험과 수치모형실험을 수행하였다. 수치해석 모형에서는 Reynolds 방정식을 지배방정식으로 사용하고 난류해석을 위해 $k-\varepsilon$모델을 적용하였으며, 자유수면변위를 추적하기 위해 VOF기법을 사용하져다. 사면 및 평탄지형상에서 발생하는 쇄파양상을 서로 다르게 설정하기 위해 수심과 입사파의 주기와 파고를 변화시킨다. 발생된 정현파의 파형은 해석해와 잘 일치하였으며, 입사파와 파고계가 설치된 위치에서 측정된 파고비 $H/H_0$는 관측값과 비교해 본 길과 놀은 정확도를 나타내었다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.29-33
• /
• 1993

이제까지 천해역에서의 파랑변형을 계산하는 여러가지 수치모형이 제안되어 있다. 그 가운데 Berkhoff(1972)가 유도한 완경사방정식을 수치계산이 쉽고, 쇄파감쇠 및 반사의 고려가 용이한 형태로 개량한 환산·경도(1985)의 시간의존 쌍곡선형 완경사방정식은 널리 이용되고 있다. 계산대상영역에 파가 비스듬하게 입사하는 경우, 외해측 경계뿐만 아니라, 파가 입사하는 측의 측방경계도 입사경계가 될 수 있다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2094-2097
• /
• 2007

본 연구에서는 사석경사제의 전면부에 불투과성 수중방파제를 설치하여, 불규칙파의 반사에 대한 수치모의와 수리모형실험을 수행하였다. 수치해석 모형에는 Reynolds Averaged Navier-stokes (RANS) 방정식을 지배방정식으로 사용하였고, 난류해석을 위하여 $\kappa-\varepsilon$ 방정식을 사용하였다. 자유수면변위의 정확한 예측을 위하여 VOF 기법을 적용하였다. 수리모형실험은 한양대학교 수리실험실의 조파수로에서 수행되었다. 본 연구에서는 입사파랑으로 불규칙파를 조파하였으며, Bretsch neider-Mistuyasu 스펙트럼을 목표스펙트럼으로 하여 재현하였다. 반사율의 산정에서 입사파와 반사파를 분리하기 위하여 수치모형실험에서는 3점법을 사용하였고, 수리모형실험에서는 2점법을 사용하였다. 수치모의를 통하여 예측된 반사율과 수리모형실험에서 관측한 결과는 서로 잘 일치하였다.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.649-655
• /
• 1999

The maximum run-up heights of periodic waves are numerically investigated in this study. Incident waves are sinusoidal and enoidal waves. The maximum run-up height of enoidal wave approaches that of sinusoidal wave as the wave length decreases, while it approaches that of solitary wave as the wave length increases. If wave height is fixed, the maximum run up heights of enoidal waves are always greater than those of sinusoidal waves but smaller than those of solitary waves.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2021

In order to analyze wave propagation, tidal current, and sediment transport in the vicinity of the Gaeya open channel, it was classified into before(CASE1W) and after(CASE2W) installation of various artificial structures, and the calculation results for CASE1W and CASE2W were compared. For wave propagation, the results of incident and reflected waves were derived using the SWAN numerical model, and the tidal current velocity results were derived using the FLOW2DH numerical model for tidal current. The results of the SWAN numerical model and the FLOW2DH numerical model became the input conditions for the SEDTRAN numerical model that predicts sediment transport, and the maximum bed shear stress and suspended sediment concentration distribution near the Gaeya open channel were calculated through the SEDTRAN numerical model. As a result of the calculation of the SWAN numerical model, the wave height of CASE2W was increased by 40~50 % compared to CASE1W because the incident wave was diffracted and superimposed and the reflected wave was generated by about 7 km long northen jetty. As a result of the calculation of the FLOW2DH numerical model, According to the northen breakwater, the northen jetty and Geumrando, CASE2W was calculated 10~30 % faster than CASE1W in the tidal current of the Gaeya open channel. As a result of the calculation of the SEDTRAN numerical model, the section where the maximum bed shear stress is 1.0 N/m² or more and the suspended concentration is 80mg/L or more was widely distributed in the Gaeya open channel from the marine environment by the complex wave field(incident wave, reflected wave and tidal wave) and the installation of various artificial structures. it is believed that a sedimentation phenomenon occurred in the Gaeya open channel.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.376-387
• /
• 2012

Based on the nonlinear spring model coupled with perturbation method, 2nd harmonic waves generated by oblique incident ultrasound on nonlinear crack interface were calculated and investigated. Reflected and transmitted waves from the interface were determined and analyzed at various angle of incidence for the cracks with different interfacial stiffness in order to estimate the 2nd harmonic generation of incident ultrasound. It was shown in computer simulation that the 2nd harmonic components changed much with the increase of incidence angle in both reflected and transmitted wave, but became very small when the incident angle approached toward 90 degree. It can be concluded that the 2nd harmonic component of reflected wave has a meaningful amplitude as much as the transmitted 2nd harmonic wave from partly closed crack.