• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.89-93
• /
• 2013

This paper is estimating a target direction of arrival with incident to receiver in spatial. This paper presented covariance using constraint matrix to correlation interference signal cancellation in multi input multi output array antennas system. we proposed a target direction of arrival estimation algorithm using cost function and minimum variance method. Through simulation, we were analysis a performance to compare general SPT-LCMV algorithm and proposal algorithm. We showed that proposal algorithm improve more target estimation than general SPT-LCMV algorithm in direction of arrival.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.229-229
• /
• 2016

현재 국내외에서 제공되고 있는 기후변화 시나리오 자료의 경우 일단위로 제공되고 있다. 그러나 수자원 설계 및 계획 시 중요한 입력자료 중 하나는 시간단위 강우 자료이다. 이러한 시간단위 자료는 강우-유추 분석, 댐 설계 및 위험도 분석에 있어 중요한 입력 변수중 하나이므로 기후변화 시나리오에 따른 영향을 평가하기 위해선 신뢰성 있는 상세화 기법이 필요하다. 국내외에서는 일단위에서 일단위로 상세화 하는 기법, 또는 공간상세화 기법 연구는 상당히 진행된바 있는 반면, 시간단위 상세화 기법 연구는 일단위 연구에 비해 상대적으로 미진한 실정이다. 즉 일단위 상세화 기법의 경우 Weather generator, Weather typing 등 다양한 기법이 존재하고 이를 활용한 연구사례가 많지만, 시간단위 상세화 기법의 Poisson 기법을 활용한 사례가 다수 존재하였다. 이러한 이유로 본 연구에서는 기후변화 시나리오에 따른 영향을 평가하기 위해 Bayesian 기법을 도입하여 신뢰성 있는 시간단위 강우량을 생성할 수 있는 모형을 개발하였으며, 연대별로 산정된 결과는 빈도해석을 통해 미래 확률강우량을 제시하였다. 본 연구에서 제안하고자 하는 Bayesian Copula 모형은 기존 주변확률분포(marginal distribution) 매개변수와 Copula 매개변수 추정시 각각 다른 기법을 활용하여 추정하며, 각각 모형에서 발생하는 불확실성은 추정하지 못하는 반면, Bayesian Copula 모형의 경우 매개변수의 사후분포를 정량적으로 제시할 수 있으며, 추정되는 확률강우량 역시 불확실성을 정량적으로 산정할 수 있는 장점을 확인할 수 있었다.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.342-347
• /
• 2008

Face tracking and recognition are difficult problems because the face is a non-rigid object. If the system tries to track or recognize the unknown face continuously, it can be more hard problems. In this paper, we propose the method to track and to recognize the face of the unknown person on video sequences using linear combination of nonlinear manifold models that is constructed in the system. The arbitrary input face has different similarities with different persons in system according to its shape or pose. Do we can approximate the new nonlinear manifold model for the input face by estimating the similarities with other faces statistically. The approximated model is updated at each frame for the input face. Our experimental results show that the proposed method is efficient to track and recognize for the arbitrary person.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.119-124
• /
• 1998

Block Matching Motion Estimation(BMME) Algorithm is demands a very large amount of computing power and have been proposed many fast algorithms. These algorithms are many problem that larger size of VLSI scale due to non-localized search block data and problem of non-reuse of input data for each processing step. In this paper, we designed systolic arry of high processing capacity, constraints input output pin size and reuse of input data for small VLSI size. The proposed systolic array is optimized memory access time because of iterative reuse of input data on search block and become independent of problem size due to increase of algorithm's parallelism and total processing elements connection is localized spatial and temporal. The designed systolic array is reduced O(N6) time complexity to O(N3) on moving vector and has O(N) input/output pin size.

• Smart Media Journal
• /
• v.7 no.1
• /
• pp.31-36
• /
• 2018

In this paper, we propose automatic screen on / off method of OST-HMD screen using gaze depth estimation technique. The proposed method uses MLP (Multi-layer Perceptron) to learn the user's gaze information and the corresponding distance of the object, and inputs the gaze information to estimate the distance. In the learning phase, eye-related features obtained using a wearable eye-tracker. These features are then entered into the Multi-layer Perceptron (MLP) for learning and model generation. In the inference step, eye - related features obtained from the eye tracker in real time input to the MLP to obtain the estimated depth value. Finally, we use the results of this calculation to determine whether to turn the display of the HMD on or off. A prototype was implemented and experiments were conducted to evaluate the feasibility of the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.805-811
• /
• 2016

This paper proposes an estimation algorithm of phase currents of inverter systems with the planar bus bars for brush-less DC (BLDC) motors. The planar bus bar can improve the characteristic of the EMC(Electro-Magnetic Compatibility). In these inverters, a single current sensor of the dc-link measures the sum of a smooth capacitor current and phase currents of brush-less DC motor. Thus, it is essential to extract phase currents from the measured single current to control BLDC motor. Therefore, in this paper, the phase current is estimated by analyzing equivalent circuits of the BLDCM in ON and OFF periods of switching elements. The usefulness of the proposed algorithm is verified through experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.411-419
• /
• 2005

In this paper, a sliding mode observer for solar array current estimation in the photovoltaic power generation system is presented. The solar array current estimation Information is obtained from the sliding mode observer and fed into the maximum power point tracker to update the reference voltage. The parameter values such as inverter dc link capacitances cm be changed up to 50$\%$ from their nominal values and the linear observer can't estimate the correct state values under the parameter variations and noisy environments. The configuration of sliding mode observer is simple, but it shows the robust tracking performance against parameter variations and modeling uncertainties. In this paper, the method for constructing the sliding mode observer using equivalent control input is presented and the convergence of the proposed observer is verified by the Lyapunov method. The mathematical modeling and the experimental results verify the validity of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2579-2585
• /
• 2010

This paper proposes a dynamic human pose tracking method using motion-based search strategy from an image sequence obtained from a monocular camera. The proposed method compares the image features between 3D human model projections and real input images. The method repeats the process until predefined criteria and then estimates 3D human pose that generates the best match. When searching for the best matching configuration with respect to the input image, the search region is determined from the estimated 2D image motion and then search is performed randomly for the body configuration conducted within that search region. As the 2D image motion is highly constrained, this significantly reduces the dimensionality of the feasible space. This strategy have two advantages: the motion estimation leads to an efficient allocation of the search space, and the pose estimation method is adaptive to various kinds of motion.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.12-18
• /
• 2006

This paper presents a method to extract a good high-resolution image from a low-resolution video in an automatic manner. Since a high-resolution image reconstruction method utilizing several low-resolution input images works better than a conventional interpolation method utilizing single low-resolution input image only if the input images are well registered onto a common high-resolution grid, low-resolution input images should be carefully chosen so that the registration errors can be carefully considered. In this paper, the statistics obtained from the motion-compensated low-resolution images are utilized to evaluate the feasibility of the input image candidates. Maximum motion-compensation error is estimated from the high-resolution image observation model. U the motion-compensation error of the input image candidate is greater than the estimated maximum motion-compensation error, the input image candidate is discarded. The number of good input image candidates and the statistics of the motion-compensation errors are used to choose final input images. The final input images chosen from the input image selection block are given to the following high-resolution image reconstruction block. It is expected that the proposed method is utilized to extract a good high-resolution image efficiently from a low-resolution video without any user intervention.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.443-446
• /
• 2001

본 논문에서는 센서 융합과 배경 추정 기법을 이용하여 연속된 영상에서 물체 영역을 검출하는 기법을 제안하였다. IR/CCD각각의 카메라로부터 얻은 입력 영상을 정렬하고 융합하는 과정을 거친 후, 각 화소 단위의 배경 모델을 추정하고 시간이 지남에 따라 이를 갱신함으로써 물체 영역을 효과적으로 검출하는 기법을 제시하고 있다. 실험은 차량을 대상으로 하였고, 카메라가 움직이는 상황과 비교적 복잡한 환경에서도 좋은 결과를 얻을 수 있었다.