• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2241-2248
• /
• 2017

The coaxial line impedance transformer that performs impedance conversion using the coupling of two or more coaxial lines of the same length is often used for impedance matching in the low frequency region due to many advantages. This paper measures the phase and magnitude characteristics of each coaxial line in a 4:1 coaxial line impedance transformer using two 100mm coaxial lines. This experiment shows that it is more effective to make the length of the auxiliary coaxial line shorter than the main coaxial line by about 5 mm in order to realize a low loss impedance transformer. In addition, it measures the transmission characteristics by directly connecting a 4:1 impedance transformer and a 1:4 impedance transformer. This experiment shows that it is effective to connect a 1pF capacitor between the ground and the outer conductor input point of the main coaxial line in order to increase the operating frequency range.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.53-56
• /
• 1997

Tonpilz 압전변환기에 관하여 유한요소법을 사용하여 공기중의 동특성 해석과 수중의 방사임피던스를 해석하였다. 공기중에서 트랜스듀서의 구조를 변화시키면서 입력 어드미턴스 특성과 진동모드를 해석하여 압전변환기를 모델링하였다. 음향 윈도우를 압전변환기 전면에 부착한 후 유한요소법(FEM)에 의하여 매질의 영향을 고려한 입력어드미턴스 특성을 해석하였으며, 또한 방사임피던스 계산 루틴을 추가하여 무한 배플의 경계조건하에서 방사 임피던스를 해석하였다. 공기중과 수중에서의 해석을 통하여 Tonpilz 압전변환기 단일 소자의 구조 변경 및 기계 부재의 추가등에 따라 변동하는 변환기의 특성 및 방사 임피던스를 해석하므로서 평면 배열형 음향 트랜스듀서의 설계에 필요한 파라메터를 구할 수있다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.37-43
• /
• 2017

Ultrasonic transducers with high resolution and resonant frequency are required to detect small defects (less than hundreds of ${\mu}m$) by ultrasonic testing. The resonance frequency and resolution of an ultrasonic transducer are closely related to the thickness of piezo-electric materials, backing materials, and the electric impedance matching technique. Among these factors, electrical impedance matching plays an important role because it can reduce the loss and reflection of ultrasonic energy differences in electrical impedance between an ultrasonic transducer and an ultrasonic defects detecting system. An LC matching circuit is the most frequently used electric matching method. It is necessary for the electrical impedance of an ultrasonic transducer to correspond to approximately $50{\Omega}$ to compensate the difference in electrical impedance between both connections. In this study, a 15 MHz immersion ultrasonic transducer was fabricated and an LC electrical impedance circuit was applied to that for having broad-band frequency characteristic.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.361-366
• /
• 2016

This paper presents an arbitrary impedance transformer with unequal split, based on S- to admittance parameter conversion. When compared even/ odd- mode analysis, the parameter conversion design method constitutes a simple design method to include phase delay information and arbitrary port impedances and asymmetrical configurations. To validate this design method, we designed a 50 to $12.5{\Omega}$ impedance transformer with a 3:1 unequal power split, at an operating frequency of 1 GHz. To implement the proposed impedance transformer, the low impedance transmission lines of calculated result are fabricated by the transmission line connected shunt open stub. Good experimental performances were obtained, in full agreement with simulated results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1282-1289
• /
• 2019

In order to measure the transfer characteristic(S21) of the impedance transformer, two impedance transformers must be symmetrically connected. However, the transfer characteristic of two symmetrically connected impedance transformers is influenced by the length of the intermediate connection line. This paper theoretically examines closely the length of the intermediate connection line to obtain the accurate transfer characteristic of the impedance transformer. The electrical length of the intermediate connection line for obtaining the accurate transfer characteristic of the 4:1(50-Ω:12.5-Ω) impedance transformer is calculated about 45°. Using the calculated length of the connection line, The λ/4-microstrip impedance transformer is fabricated at 1 GHz to measure the transfer characteristic. The symmetrically connected impedance transformer is measured the reflection characteristic(S11) of -40.64dB and the transfer characteristic(S21) of -0.154dB at 0.980GHz. This value is approximately equal to the theoretical calculated 987MHz center frequency and -0.15dB transfer loss value of the λ/4-microstrip impedance transformer.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.272-274
• /
• 2005

본 논문은 PWM DC-DC 변환기의 입력 임피던스를 Middlebrook의 EET (Extra Element Theorem)를 사용하여 해석할 수 있는 방법을 제시하고, 이를 이용하여 실제로 전압 제어, 전류 제어 승압형 변환기에 대한 입력 임피던스를 해석하였다. 유도된 수식은 간략화, 근사화를 통하여 보드 선도 (Bode plot)화 하였고, 입력 임피던스 특성 및 전류 루프, 피드백/피드포워드 루프, 전압루프의 영향을 해석하였다. 또한 이론적 해석은 컴퓨터시뮬레이션 결과 및 실제 제작된 PWM DC-DC 변환기의 실험 결과로 비교, 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.247-248
• /
• 2016

본 논문에서는 2단 직류-직류 전력 변환기에서 앞단과 뒷단의 전력 변환기 사이에 삽입된 라인 필터에 의해 발생하는 임피던스 오버랩이 전력 변환기에 미치는 영향을 파악한다. 그리고 본 논문은 전력 변환기가 우수한 특성을 가지도록 하는 간단하고 현실적인 라인 필터 설계 방법을 제시한다. 실험을 통하여 전력 변환기가 목표한 특성을 나타내는지를 검증한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.597-605
• /
• 2015

Negative impedance converter(NIC)-based non-Foster impedance matching is proposed for an electrically small antenna. The antenna considered in this work is a resistively loaded vee dipole(RVD) antenna, which has considerable reflection at the feed point because of its large negative input reactance. The non-Foster matching circuit built near the feed point consists of two-stage NIC circuit and a capacitor connected between the stages. The NIC is realized by using operational amplifiers(op-amps) and resistors. The circuit is designed by considering of the input impedance according to the finite open-loop gain of the practical NICs. The stability test of the impedance-matched RVD antenna is performed. The non- Foster matching circuit is implemented with the RVD antenna. The measured impedance demonstrates that the proposed non-Foster matching circuit effectively reduces the input reactance of the RVD antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.345-351
• /
• 2000

In this paper, we design and analyze a Ka-band microstrip line to rectangular waveguide transition using the expanding-cell FDTD method. The transition under investigation consists of a ridged waveguide, microstrip line, and $\lambda$/4 Chebyshev impedance transformer. To improve the accuracyand efficiency, the expanding-cell FDTD method is applied to analyze the characteristics of a ridged waveguide impedance transformer. To verify the accuracy of the expanding-cell FDTD method, S parameters of the analyzed transition are compared with those of experimental data. The efficiency of the present approach is verified by comparing the computational time for expanding-cell and that for fine cell. The relation between the number of step and operation bandwidth is analyzed by comparing the characteristics of four and three step Chebyshev waveguide impedance transformer.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.91-95
• /
• 1992

개영역(open boundary) 내의 변환기에 대한 음장 특성은 경계 조건이 좌표계와 정합되는 특수한 경우 헤름홀쯔 방정식풀이로 그렇지 않은 복잡한 형태의 음장에 대해서는 경계적분법이나 근사해법으로 얻어진다. 그러나 최근 이러한 문제들은 발달된 컴퓨터의 계산능력으로 유한요소법이나 경계요소법을 이용한 수치해법으로 해결되고 있다. 본 연구에서는 경계조건 변화에 따른 원통형 압전변환기의 방사임피던스 및 지향특성을 유한요소법 및 하이브리드형 무한요소법을 이용하여 구하고 기존의 해석적 결과와 비교하여 수중용 변환기 제작의 설계에 대한 기초자료를 제공하고자 한다.