• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.44-53
• /
• 2020

In conjunction with the Fourth Industrial Revolution, the unmanned aerial vehicle industry is being developed to a new paradigm by combining advanced technologies such as AI, Big Data and the IoT. Aeronautical developed countries such as the U.S. are focusing their efforts on the development of the safer unmanned aerial vehicles. The Korea Aerospace Research Institute, as part of the national R&D project in 2011, had succeeded in developing the first vertical takeoff and landing (VTOL) UAS, called Smart-UAV. However, although the development technology of the VTOL UAS is possessed, developing and operating of the VTOL UAS for commercial or military use are limited. The type certification procedure of the VTOL UAS developed by domestic technology is stipulated in the Korean Aviation Safety Act, but the Korean VTOL UAS airworthiness standards (KAS) hsve not been established. Thus, this study investigated the development trends of the VTOL UAS in Korea and abroad and national certification systems and procedures, and benchmarked the special conditions for the VTOL aircraft, announced by the EASA on July 2, 2019, to establish standards for type certificate of the VTOL UAS in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.73-84
• /
• 2003

Due to the problems of existing prepaid plastic card issued by Korea Highway Company, the prepaid electronic payment system using a smart card, called HipassPLUS Card, was developed to overcome the Problems. PSAM is one of the main component of the systea which can retrieve the value from HipassPLUS card, transmit the transaction data to CSAM, and store the accumulated account lists. For the safety of the elecoonic payment system, the functions of PSAM should be faultless. This paper developed a test module including the test method, the test checklist, and the test procedure. The test module examines the functionality and security of the payment mechanism to insure that the value stored in HipassPLUS card can be raid to PSAM by the merchants and the standardized SAM. The test module also inspects the transmission mechanism to send and store the transaction data kom PShM to CSAM correctly and safely. Ihe module is designed to test the standard items using the test checklists for PSAM. The test items and the test checklists of PShM was selected under the provision of the specification of Korea Highway Company and ISO standard. Ihe evaluation on PSAM using the test module indicates that PSAM satisfies the evaluation criteria on the quality characteristics of the functionality, security, and compatibility.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.264-270
• /
• 2018

In recent years, It is required to verify software reliability according to DO-178, which announced by radio technical commission for aeronautics (RTCA) and recognized by the Federal Aviation Administration (FAA), for civil aircraft developed or intended to fly in the United States or Europe. This is because the reliance on software in each field is deepening, and the efforts for improvement of software reliability have been made first in civil aviation field where economic and social impacts are catastrophic in the event of an accident. In this paper, we have identified some issues to be considered for requirements-based reliability verification required by DO-178 to improve software reliability and present the major elements of the present weapon system acquisition procedure of DAPA for each stage. In addition, we analyzed the results of applying the identified main check factors to a domestic aircraft development project based on the information accumulated in overseas aircraft development projects. As a result, we have shown that it is possible to verify requirements-based software reliability according to DO-178 by adding key checkpoints to the current weapon system acquisition procedure and providing objective inspection criteria.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.123-134
• /
• 2021

This study was conducted for the purpose of convergence exploration of evidence-based practices for the advancement of performance analysis of the extracurricular activities at Duksung Women's University. The research method consisted of an expert meeting procedure along with a procedure for analyzing previous studies dealing with the performance analysis of the university's extracurricular activities in the field of pedagogy. The contents of this study consisted of presenting some facts that should be based on evidence for the advancement of performance analysis of the extracurricular activities after the establishment of the center for extracurricular activities in Duksung Women's University. And in practices, the development and diagnostic analysis of tools for diagnosing extracurricular customized learning capabilities, data-based multidimensional analysis (IR system), continuous monitoring analysis through extracurricular certification, and analysis based on feedback tools were presented in a convergence perspective and context. As a result of the study, the evidence-based practices for the advancement of the performance analysis of the extracurricular activities at Duksung Women's University guarantees the validity and stability of the performance evaluation and feedback system of the extracurricular activities at Duksung Women's University, and has a close influence on the extracurricular education work of other universities analyzed as possible.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.787-796
• /
• 2009

The electronic commerce keeps going through a tremendous growth since the latter half of 1990's. But the consumer damages are being increased from characteristics such as non-confrontation, anonymity, internationality, unilaterality and possibility of temptation. Accordingly, this thesis has derived legal and systematic improvements for consumer protection in general as follows. First of all, it is necessary to extend the period to exercise the subscription withdrawal rights according to electronic commerce consumer protection law. Second, the electronic commerce has high possibility of causing errors by consumers because it is performed by non-confrontation and the accurate information must be provided to prevent errors in advance because it is not easy for consumers to prove their own errors. Third, a certification mark system on electronic agreement has to be adopted. Fourth, the legal, systematic and technological measures have to be adopted to prevent from having a sense of fear toward leaking or using personal information through a safe personal information management. Fifth, a strict supervision on internet trust mark is required. Finally, because the intervention or interference by a third party may take place through a hacking on messages or documents sent according to procedure in terms of online settlement, it is necessary to raise security on the system through a precise authentication between concerned parties.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.503-509
• /
• 2011

Specific surface area is becoming a very important factor when newly developed advanced nano-materials are evaluated. But there have been many differences in results when measuring specific surface areas, depending on the measuring equipments and analysis method. To verify the reliability of the specific surface area measurement device supplied within the country, Round Robin Test (RRT) has been done at 21 affiliated research institutes. As a result, it was found that several institute had problems in measuring of gas adsorption amount in measuring equipment, and this proved the need for certified reference material (CRM). Furthermore, it was also found that the results from BET analysis is easily swayed by the analyst's subjectivism, and the calculated results may differ up to 16% in case of CRM I depending on the selection range of BET analysis. So this showed that a standard guideline for BET constant C value and fitting correlation coefficient R is needed, to properly select range in BET analysis. The experience in RRT, distribution of CRM, and standardized procedure would result in improved reliability in industrial processes, and thus, would contribute to the quality management, the productivity improvement, the safety evaluation, and the new material development.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.498-507
• /
• 2017

Electronic equipments comprised of high density components with various packaging types have been recently applied to a satellite. Therefore, to guarantee high reliability of electrical equipment, a design approach, which can reduce the development period and cost through an early diagnosis in potential risks of failure, should be established. In the previous research, the reliability assesment of the electronic equipments have based on Steinberg's fatigue failure theory. However, this theory was not enough for further investigation of life prediction and reliability of the electronic equipments comprised of various sizes and packaging types due to its theoretical limitations and analysis results sensitivity with regard to different modeling technic. In that case, if detailed finite element model is established, aforementioned problems can be readily solved. However, this approach might arise disadvantage of spending much time. In this paper, to establish strategy for high reliability design of electronic equipment, we performed mechanical reliability evaluation of CCB (Camera Controller Box) at qualification level based on the approach using Sherlock unlike design techniques applied to existing business.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.573-584
• /
• 2001

Policy-Based Network Management (PBNM) architecture is to meet various needs of network users and to provide effective management facilities in distributed and large scale networks to network managers. In PBNM, network managers perform network management operations by stipulating a set of rules rather than control each network component. On the other hand, providing security services such as authentication, privacy of messages as well as a new flexible and extensible administration framework, SNMPv3 enables network managers to monitor and control the operation of network components more secure way than ever before. Despite of its enhanced security services, SNMPv3 has difficulties in managing distributed, large-scaled network because it does not provide centralized security management facilities. In this paper, we propose a new security model called Role-based Security Management model (RSM) with security management policy to support scalable and centralized security management for SNMP-based networks. Also, the structure and the operation of the security system as well as the efficiency analysis of RSM in terms of security management are also described.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.674-680
• /
• 2012

As(III) and As(V) were analyzed in bamboo salts by hydride generation ICP-AES. In order to quantify the total amount of As in bamboo salts, $AsH_3$ was producted by reacting with 6 mol/L hydrochloric acid and $NaBH_4$, which was then analyzed by hydride generation ICP-AES. As(V) was quantified simultaneously after selectively quantifying As(III). As(III) was quantified by determining the total amount of As and then correcting for the amount of As(III). To improve the reliability of the analysis we repeated the experiment several times to check the detection limit, quantification limit, and measurements of our testing methods. According to the result of our quantification analysis of As existing in bamboo salt, the range of total As content was 0.05 mg/kg~0.2 mg/kg and As(V) was over 90% of the total As.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.19-26
• /
• 2014

International attention on the Northern Sea Route has been increased as the decreased sea-ice extents in Northern Sea raise the possibility to develop new sea routes and natural resources. However, to protect ships' safety and pristine environments in polar waters, International Maritime Organization(IMO) has been developing the Polar Code to regulate polar shipping. The marine navigation supporting system is essential for ships traveling long distance in the Northern Sea as they are affected by ocean weather and sea-ice. Therefore, to cope with the IMO Polar Code, this research proposes the functional requirements to develop the marine navigation supporting system for the Northern Sea Route. The functional requirements derived from the IMO Polar code consist of arctic voyage risk map, arctic voyage planning and MSI(Marine Safety Information) methods, based on which the navigation supporting system is able to provide dynamic and safe-economical sea route service using the sea-ice observation and prediction technologies. Also, a requirement of the system application is derived to apply the marine navigation supporting system for authorizing ships operating in the Northern Sea. To reflect the proposed system in the Polar Code, continual international exchange and policy proposals are necessary along with the development of sea-ice observation and prediction technologies.