• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.87-92
• /
• 2010

This study set up 25, 35% for silica fume, SFFB's 2 level and water-combination material ratio, silica fume 10% for substitution ratio, and 4 level of SFFB 5, 10, 15(%) in order to compare and analyze the quality characteristic of ultra high strength concrete according to the substitution ratio of silica fume free binder (SFFB) that can be utilized as a substitute material for silica fume. As a result of an experimentation, the lower water-combination material ratio was, the higher addition ratio of high performance water-reducing agent for securing target liquidity increased, and it indicated the tendency that addition ratio of high performance water-reducing agent decreases because of material characteristic that SFFB has a lower absorptiveness than silica fume. The best strength was shown when SFFB substitution ratio is 10% at compressive strength and when substitution ratio is 15% at tensile strength, and it was indicated that at autogenous shrinkage contraction decreases compared to Plain(SF) regardless of substitution ratio of W/B and SFFB.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.204-210
• /
• 2011

In this study, Jute fibers reinforced polypropylene (JFRP) composites were manufactured by injection molding technique. In order to improve the affinity and adhesion between fibers and thermoplastic matrices during manufacturing, Maleic anhydride (MA) as a coupling agent have been employed. Untreated and treated surfaces of jute fibers were characterized using SEM and Fourier transform infrared (FTIR). Physical properties like water absorption rate were studied. Tensile and flexural tests were carried out to evaluate the composite mechanical properties. Tensile test and bending test indicated that JFRP composites show higher strength and modulus than pure PP. In addition, strength and modulus were found to be influenced by the variation of MAPP content (1%, 2%, and 3%). Tensile fracture surfaces were examined using scanning electron microscope. It ensures better interfacial adhesion between fibers and matrix by increasing the percentage of MAPP.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.33-41
• /
• 1992

For the purpose of improving the strength of Concrete, Silica Fume which has $SiO_2$ content of 90% and average particle diameter of $0.2{\mu}m$ was substituted to some extent as a cementious material of concrete. By means of using high range water reducing admixture and reducing water-cementions material ratio, the high strength mortar and concrete which have compressive strength of $865kg/cm^2$, $725kg/cm^2$, respectively were acquired. But the fact that the slump loss according to elapsed time was high and the tensile strength and elastic modulus were not improved sufficiently was the problem to be solved.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.24-31
• /
• 2008

In this work, calcium hydroxide and magnesium carbonate as metal ionic crosslinking agents were used to introduce ionic crosslinking points to the ethylene vinylacetate (EVA) emulsions for the enhancement of water resistance and mechanical properties of emulsion films. The properties of EVA emulsion film were investigated in crosslinking density, thermal features, surface energy, and mechanical properties, such as tensile strength, elongation at break and tear strength. With the increasing content of metal ionic crosslinking agent, the crosslinking density of the EVA emulsion film increases, resulting into the improvement of water resistance. The surface energy and mechanical properties of the EVA emulsion film, however, showed somewhat different behaviors. The highest surface energy, tensile strength, and tear strength were observed when 0.4% for calcium hydroxide and 0.5% for magnesium carbonate was added respectively, because the EVA emulsion containing carboxylic acid forms strong carboxylate-metal bond of ionically-crosslinked system. Therefore, it can be concluded that metal ionic crosslinking agents, such as magnesium carbonate and calcium hydroxide are considered to improve water resistance and mechanical properties of the EVA emulsion.

• Elastomers and Composites
• /
• v.49 no.2
• /
• pp.134-143
• /
• 2014

Polymers are introduced to neat asphalt to prepare self-healing asphalt. The polymers are Surlyn, Nylon and polyethyleneterephtalate(PET). Since they are known as having high intermolecular force, they have high processing temperature. Therefore they are hardly introduced into the asphalt as bulk state. So in this study, they are introduced as solutions. Polymer-modified asphalts showed excellent modification effect and also healing effect. 5% polymer added asphalt showed more than 18% increased tensile strength. This tensile strength increment can be explained by polymer's intermolecular forces. Especially Surlyn interacts with asphalt molecules by hydrogen bonding and also with metals in asphalt by ionic bonding. When it comes to healing aspect the healing efficiency of Surlyn increased to 138% based on tensile strength. That of PET increased to 141% based on complex modulus and in case of Nylon it increased to 131% based on impact strength. This tells that in dealing with healing efficiency the important considering factors are not only the intermolecular forces of the polymers but also the interaction between the polymer and asphalt molecules.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.206-215
• /
• 2017

An experimental program was carried out to investigate the mechanical properties of high-strength concrete. High-strength concrete with compressive strengths of 80 to 120 MPa was tested. Test results are presented regarding effect of water-binder ratio on compressive strength and compressive strength gain. In addition, the effect of curing methods on compressive strength, elastic modulus, splitting tensile strength, and modulus of rupture is investigated. Test results of elastic modulus, splitting tensile strength, and modulus of rupture are compared with predictions from the current design recommendations. Predictions of elastic modulus by using KCI recommendation has good agreement with test results. However, predictions of modulus of rupture by using KCI recommendation underestimate the test results. ACI 363R recommendations predict well test results of splitting tensile strength and modulus of rupture. ACI 363R recommendations for predicting splitting tensile strength and modulus of rupture can be used for high-strength concrete with compressive strengths up to 120 MPa.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.81-94
• /
• 2010

This paper deals with the fracture simulation of UHPFRC girder with the interface type model. Based on the existing numerical simulation of quasi-brittle fracture in normal strength concrete, constitutive modeling for UHPFRC I-girder has been improved by including a tensile hardening at the failure surface. The finite element formulation is based on a triangular unit, constructed from constant strain triangles, with nodes along its sides and neither at the vertex nor the center of the unit. Fracture is simulated through a hardening/softening fracture constitutive law in tension, a softening fracture constitutive law in shear as well as in compression at the boundary nodes, with the material within the triangular unit remaining linear elastic. LCP is used to formulate the path-dependent hardening-softening behavior in non-holonomic rate form and a mathematical programming algorithm is employed to solve the LCP. The piece-wise linear inelastic yielding-failure/failure surface is modeled with two compressive caps, two Mohr-Coulomb failure surfaces, a tensile yielding surface and a tensile failure surface. The comparison between test results and numerical results indicates this method effectively simulates the deformation and failure of specimen.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.141-146
• /
• 1995

In this study the plastic buckling analysis of a simply supported plate under biaxial compression/tension loading is carried out considering the plastic compressibility. Plastic buckling of a biaxially loaded rectangular plate is governed by two kinds of mechanism, the tension strengthening and plastic weakening under which the optimal combination of tension and compression is obtained for the buckling strength. To consider the plastic compressibility, the Drucker-Prayer plastic potential is employed. General eigenvalue equations are derived for a rectangular plate within the framework of small strain plasticity and isotropic hardening.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.373-376
• /
• 2004

자동차 부품제조에 있어 비용절감과 경량화에 대한 노력은 시간이 지날수록 더욱 그 강도를 더해가고 있다. 이에 따라 tube hydroforming 공법과 고강도 소재를 결합한 부품제조 기술이 국내에서도 활기를 띄기 시작하여 각 자동차사별로 양산 적용을 앞두고 있다. 포스코는 철강소재 자동차 부품 개발에 대한 촉진 및 신수요 창출을 위하여 hydroforming사업을 시작하였으며 이미 수 종의 부품을 국내 자동차사와 공동으로 개발하여 적용을 추진하고 있다. 특히 인장강도 45kg 이상의 고강도 튜브를 이용한 hydroforming샤시 부품을 국내에서 최초로 개발하였으며 현재 시작품 제작을 완료하였다. Hydroforming 부품의 개발은 부품형상 정보를 이용 CAE를 통한 공정해석, 금형의 상세 설계 및 제작 그리고 시작품 제작의 과정을 통해 이루어지며 최종적으로 양산금형이 제작된다. 본 연구에서는 이러한 일련의 과정을 소개하고자 한다.

• Composites Research
• /
• v.12 no.3
• /
• pp.8-16
• /
• 1999

Carbon woven fabric/C/SiC composites were fabricated by multiple impregnations of carbon woven fabric/carbon preform with the polymer precursor of SiC, i.e., polycarbosilane. In addition, two kinds of low density carbon/carbon preforms which had different fiber volume fraction and fiber orientation, i.e., a carbon woven fabric(${\thickapprox}$55 vol%)/carbon and a chopped carbon fiber${\thickapprox}$40 vol%)/carbon composites, were reaction-bonded with a silicon melt at 1$700^{\circ}C$ in a vacuum to fabricate dense carbon fiber/Si/SiC composites. The reaction-bonding process increased the density to ~2.1 g/$cm^3$ from 1.6 g/$cm^3$ and 1.15 g/$cm^3$ of a carbon woven and a chopped carbon preforms, respectively. All of the composites fractured with extensive fiber pull-out. The higher the density the higher the stiffness and proportional limit stress. The mechanical properties obtained from a three-point bend and tension tests were compared. The ratios of the peak tensile stresses to the bending strengths of a carbon woven and a chopped carbon composites were about one-third, respectively. The carbon woven fabric/Si/SiC composites with density of 2.06 g/$cm^3$ showed ~120 MPa of ultimate strength and ~80 MPa of proportional limit in bend testing.