• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.478-484
• /
• 2006

The paper presents methods of determining the capacity and installation positions of regenerative inverters installed in DC 1500V electric railway system. We suggested a method that approximates using parameters related to substations where regenerative inverters are installed, railway lines and operating motor cars, and another that calculates using regenerative power obtained from Train performance Simulation (TPS) and Power Flow Simulation (PFS). We carried out TPS and PFS for Seoul Subway Line $5{\sim}8$, calculating regenerative power and determining substations where regenerative inverters would be installed and the optimal capacity and number of inverters to be installed.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.208-209
• /
• 2016

본 논문에서는 가동물체형 AFPM 파력 발전기용 시뮬레이터 구현 및 실험을 수행하였다. 파력 발전기는 파도의 에너지를 이용하여 부이의 움직임에 따라 발전하는 방식이다. 기존의 소형 파력 발전 시스템의 경우 단순히 전파 정류하여 축전지에 충전하는 방식을 사용한다. 그러나 전파 정류기를 사용하는 경우 파도에 속도에 따른 최적의 발전량을 제어하지 못해 발전 효율이 떨어지는 단점이 있지만, 인버터를 사용하는 경우 속도에 따른 발전량을 순시 적으로 제어할 수 있어 발전 효율을 높일 수 있다. AFPM 파력 발전기의 제어를 위하여 전류제어기와 센서리스 알고리즘을 구성하였으며 구현된 제어기는 파력 발전 시뮬레이터 실험을 통하여 회전자 위치 추정 및 속도에 따른 제어 성능을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.89-90
• /
• 2016

경전철 차량에 위치한 집전장치는 무선급전 인버터로부터 전력을 공급받아 동력계통 또는 에너지 저장장치에 전력을 전달하는 역할을 한다. 따라서, 집전장치의 손실을 최소화 하고 전력을 안정적으로 전달할 수 있는 제어방법이 필요하다. 본 논문은 이러한 필요를 만족하는 적절한 제어방법을 제안한다. 시뮬레이션을 통하여 제안한 집전장치 제어방법의 유효성을 검증한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.2
• /
• pp.191-198
• /
• 2011

In this paper, the fault diagnosis scheme for PMSM drives has been proposed to maintain control performance under a switch open-phase fault of inverter. When the open-phase fault occurs, the stator resistances of PMSM are estimated by Extended Kalman Filter (EKF) in real time and can appear differently according to the location of fault occurrence to check the fault detection and identification. The control algorithm is configured without the additional device and low cost by adding the existing control program. Also, by using motor parameter the estimated stator resistance value improves the control performance of the controller affected by parameter variation. The feasibility of the proposed fault diagnosis algorithm is validated in simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.4
• /
• pp.279-285
• /
• 2020

An open-end winding (OEW) permanent magnet synchronous motor with dual inverters can synthesize large voltages for a motor with the same DC link voltage. This ability has the advantage of reducing the use of DC/DC boost converters or high voltage batteries. However, zero-sequence voltage (ZSV), which is caused by the difference in the combined voltage between the primary and secondary inverters, can generate a zero-sequence current (ZSC) that increases system losses. Among the methods for eliminating this phenomenon, combining voltage vector eliminated ZSV cannot be accomplished by the conventional Pulse Width Modulation(PWM) method. In this study, a PWM carrier generation method using functionalization to generate a switching pattern to suppress ZSC is proposed and applied to analyze the control influence of the center-zero vector in the switching sequence about the current ripple.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.230-238
• /
• 2003

In this paper, Inverter drives adopting 2 phase space vector SRP-PWM (Separately Randomized Pulse Position PWM) with fixed switching frequency is proposed. The proposed 2 phase space vector SRP-PWM scheme is based on the 3 phase SRP-PWM. In the proposed SRP-PWM scheme, each of two phase pulses is located randomly in each switching interval. The experimental results show that the voltage and acoustic noise harmonics are spread to a wide band area. Also, the performance of the proposed 2 phase SRP-PWM and the conventional center aligned SVM are compared to each other. In result, the speed response is nearly similar to each other from the viewpoint of the v/f constant control.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5398-5404
• /
• 2011

Environment-friendly vehicles using electricity vary, but electrical motor, battery, BMS, inverter, converter, etc., are the core technologies. This research paper deals with the die design and manufacture of the terminal part, one of the key parts of the electrical motor. This research sought to introduce problems such as assembly defect, correction of the R-part shape, correction of the location between holes, etc., in the process of manufacturing the electrical motor terminal die and to produce final products by correcting the problems that were tackled herein.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.88-95
• /
• 2008

This paper proposes a fast fault detection algorithm under open-circuit fault of a switch for a brushless DC(BLDC) motor drive system. This proposed method is configured without the additional devices for fault detection and identification. The fault detection and identification are achieved by a simple algorithm using the operating characteristic of the BLDC motor. After the fault identification, the drive system is reconfigured for continuous operation. This system is reconfigured by four-switch topology connecting a faulty leg to the middle point of DC-link bidirectional switches. This proposed method can also be embedded into existing BLDC motor drive systems as a subroutine without excessive computational effort. The feasibility of a the proposed fault detection algorithm is validated in simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.81-90
• /
• 2002

This paper presents an Implementation of digital high-performance position sensorless control system of Reluctance Synchronous Motor(RSM) drives with Direct Torque Control(DTC). The system consists of stator flux observer, speed and torque estimator, two digital hysteresis controllers, an optimal switching look-up table, Insulated Gate Bipolar Transistor(IGBT) voltage source inverter, and TMS320C31 DSP board. The stator flux observer Is based on the combined voltage and current model with stator flux feedback adaptive control of which inputs are current and voltage sensed on motor terminal for wide speed range. In order to prove the suggested sensorless control algorithm for industrial field application, we have some simulation and actual experiment at low and high speed range. The developed high-performance speed control by fully digital system are shown a good response characteristic of control results and high performance features using 1.0[kW] RSM having 2.57 reluctance ratio of $L_d/L_q$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.287-297
• /
• 1998

RPWM(Random Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics on wide frequency area. Using randomly changed switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise can be spread into the wide-band area. And the wide-band noise is much more comfortable and less annoying than the narrow-band one. So RPWM have been attracting an interest as an excellent reduction method of acoustic noise on the inverter drive system. In this paper a new RPPWM(Random Position PWM) is proposed and implemented. Each of three pulses is located randomly in each switching intervals. Along with the randomization of PWM pulses, the space vector modulation is processed on the C167 microcontroller also. The experimental results show that the voltage and current harmonics were spread into wide band area and that the audible switching noise was reduced by proposed RPPWM method.