• Applied Biological Chemistry
• /
• v.33 no.3
• /
• pp.239-246
• /
• 1990

Monascus anka strains with higher pigment production were developed using UV mutation and natural selection. To obtain organic solvent soluble pigments from Monascus anka, the following culture conditions were compared : standing and shaking culture with Nishikawa's medium, and shaking culture with Lin's medium. Shaking culture in Lin's medium exhibited decrease in solvent-soluble intracellular pigments after initial increase. The decrease was accompanied by the increase in water-soluble extracellular pigments. Monascus anka preferred sucrose and ethanol among 7 carbon sources tested. Treatment of sterol biosynthesis inhibitors, $({\pm})$-miconazole and chlorocholine chloride(CCC) , directed carbon pool to the biosynthetic pathway leading to the pigments with CCC's more pronounced effect. Two dimensional TLC revealed at least 7 yellow pigments suggesting existence of hereto unreported pigment. One of the most abundant yellow pigments was isolated and found to be ankaflavin by NMR and MS analysis.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.2
• /
• pp.98-103
• /
• 2011

[ $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ ]cathode material for lithium secondary battery is obtained using co-precipitation method. To determine the optimal metal solution concentration value, the CSTR coprecipitation was carried out at various concentration values(1-2 mol/L). The surface morphology of coated samples was characterization by SEM(scanning electron microscope) and XRD (X-Ray Diffraction)analyses. Impedance analysis and cyclic voltammogram presented that internal resistance of the cell was dependent upon the concentration of metal solution. such data is very helpful in determining the optimal content of metal solution concentration to enhancing electrochemical property by adjusting powder size distribution and crystal structure.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.467-476
• /
• 1999

This paper analyzed the behavior of fixed-bed catalytic reactor (FBCR) which synthesizing maleic anhydride(MA) from the selective oxidation of n-butane. The behavior of FBCR describing convection-diffusion-reaction mechanism is examined by using two-dimensional pseudohomogeneous plug-flow transient model, with the kinetics of Langmuir-Hinshelwood type. Prediction model is composed by optimum parameter estimation from temperature profile, yield and conversion of single FBCR on operating condition variations of Sharma's pilot-plant experiment. A double FBCR with same yield and conversion for single FBCR generated a $8.96^{\circ}C$ lower hot spot temperature than a single FBCR. We could predict parametric sensitivity according to the variation of possible operating condition (temperature, concentration, volumetric flow of feed reactant and coolant flow rate) of single and double FBCR. Double FBCR showed the behavior of more operating range than single FBCR. Double FBCR with nonuniform activities could assure safety operation condition for the possible variation of operating condition. Also, double FBCR had slightly higher than the single FBCR in conversion and yield.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.219-228
• /
• 2013

To understand characteristics of biogeochemical corrosion for the metal canisters that usually contain the radioactive wastes for a long-term period below the ground, some metal materials consisting of cast iron and copper were reacted for 3 months with D. desulfuricans, a sulfate-reducing bacterium, under a reducing condition. During the experiment, concentrations of dissolved metal ions were periodically measured, and then metal specimen and surface secondary products were examined using the electron microscopy to know the chemical and mineralogical changes of the original metal samples. The metal corrosion was not noticeable at the absence of D. desulfuricans, but it was relatively greater at the presence of the bacterium. In our experiment, darkish metal sulfides such as mackinawite and copper sulfide were the final products of biogeochemical metal corrosion, and they were easily scaled off the original specimen and suspended as colloids. For the copper specimen, in particular, there appeared an accelerated corrosion of copper in the presence of dissolved iron and bacteria in solution, probably due to a weakening of copper-copper binding caused by a growth of other phase, iron sulfide, on the copper surface.

• Applied Biological Chemistry
• /
• v.48 no.4
• /
• pp.411-417
• /
• 2005

Aqueous extracts were prepared from 21 medicinal herbs including Herba Pogostemi (Agastache rugosa) to examine their modulatory effects on NO production in mouse macrophage cell line RAW264.7 cells. While almost all medicinal herb extracts failed to show marked scavenging activities to NO produced by LPS stimulation, only Herba Pogostemi showed a rather strong induction of NO production in RAW264.7 cells without stimulation with LPS. When we treated the cell with $200{\mu}M\;of\;N^G-monomethyl-L-arginine\;(N^GMMA)$, a NOS2 inhibitor, a significant reduction in NO production could be observed. Moreover, a treatment of $100{\mu}M$ pyrrolidine dithiocarbamate (PDTC) led to about a 79% reduction of NO production. These results demonstrated that the aqueous extract of Herba Pogostemi might provide a second signal for the expression of NOS2 in RAW264.7 cells, and suggested that Herba Pogostemi induces NO production through L-argininedependent pathway.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.2
• /
• pp.68-74
• /
• 2015

To compare the microstructure and electrochemical properties between two binary alloys (Cr-Si, Ni-Si), two composition of binary alloys with the same capacity were selected using phase-diagram and prepared by matrix-stabilization method to suppress the volume expansion of Si by inactive-matrix. Master alloys were made by Arc-melting followed by fine structured ribbon sample preparation by Rapid Solidification Process (RSP, Melt-spinning method) under the same conditions. Also powder samples were produced by wet grinding for X-Ray Diffraction (XRD) and electrochemical measurements. As predicted from the phase diagram, only active-Si and inactive-matrix ($CrSi_2$, $NiSi_2$) were detected. The results of Scanning Electron Microscope (SEM) and Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy (TEM-EDS) show that Cr-Si alloy has finer microstructure than Ni-Si alloy, which was also predictable through phase diagram. The electrochemical properties related to microstructure were evaluated by coin type full- and half-cells. Separately, self-designed test-cells were used to measure the volume expansion of Si during reaction. Volume expansion of Cr-Si alloy electrode with finer microstructure was suppressed significantly and improved in cycle capability, in comparison Ni-Si alloy with coarse microstructure. From these, we could infer the correlation of microstructure, volume expansion and electrochemical degradation and these properties might be predicted by phase diagram.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.305-310
• /
• 2003

Hydrophobic core variant of ubiquitin appeared to have partially folded structure at pH around 2. The intrinsic tryptophan fluorescence emission maximum of this ubiquitin variant at pH 2 showed slight blue shift compare to that of unfolded state, suggesting that some residual tertiary structures remain in this solvent condition. At the same solvent condition, this ubiquitin variant binds with hydrophobic dye, 8-anilinonaphthalene-1-sulfonic acid(AMS), which is known to bind to exposed hydrophobic surface. Furthermore, far-UV circular dichroic spectrum of this ubiquitin variant in the diminished pH was remarkably different from the far-UV CD spectrum of the native state or unfolded state. Based on the molar ellipticity at 220 nm, this ubiquitin variant at pH 2 appeared to have significant amount of secondary structures. All these observations suggest that this ubiquitin variant in the diminished solvent pH has loosely folded hydrophobic core with some secondary structures, which are key features of molten globule conformation. Since molten globule has long been considered as a protein folding intermediate, it is considered that this hydrophobic core variant ubiquitin will serve as a valuable model to study protein folding process.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.85-94
• /
• 2011

Present study aimed to investigate the effect of zinc accumulation on the tissues of Carassius auratus with various rearing condition. Heavy metal, Zn, was accumulated in the gill, bone and muscle increased for exposure period of 40 days. Moreover, the accumulated concentration of Zn in the gill showed relatively higher than that in other tissues. Also, activities of antioxidant enzymes in the gill, kidney, liver and muscle tissues after exposure to Zn were increased in the manner of exposure period. Antioxidant enzyme activities were shown higher in the gill and muscle than those in the kidney and liver tissues. The gill of C. auratus showed abnormal shapes in its secondary lamellae by long time exposure condition and determined the increased numbers of mucous cells in gill exposed to Zn. In addition, the edema, the exfoliation of epithelial cell was shown in the gill and membrane damages were observed in mitochondria and nucleus. In the kidney, we observed not only the atrophied glomerulus, but the expansion of empty space in Bowman's capsule. Based on the above results, it is considered that the exposure to the high level of Zn for long period possibly involves in the decrease of respiratory and excretory rates, giving rise to secondary lesion of tissues.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.87-103
• /
• 2019

Nonaqueous organic electrolyte solution in commercially available lithium-ion batteries, due to its flammability, corrosiveness, high volatility, and thermal instability, is demanding to be substituted by safer solid electrolyte with higher cycle stability, which will be utilized effectively in large-scale power sources such as electric vehicles and energy storage system. Of various types of solid electrolytes, composite solid electrolytes with polymer matrix and active inorganic fillers are now most promising in achieving higher ionic conductivity and excellent interface contact. In this review, some kinds and brief history of solid electrolyte are at first introduced and consequent explanations of polymer solid electrolytes and inorganic solid electrolytes (including active and inactive fillers) are comprehensively carried out. Composite solid electrolytes including these polymer and inorganic materials are also described with their electrochemical properties in terms of filler shapes, such as particle (0D), fiber (1D), plane (2D), and solid body (3D). In particular, in all-solid-state lithium batteries using lithium metal anode, the interface characteristics are discussed in terms of cathode-electrolyte interface, anode-electrolyte interface, and interparticle interface. Finally, current requisites and future perspectives for the composite solid electrolytes are suggested by help of some decent reviews recently reported.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.173-181
• /
• 2021

Reinforced concrete structures are exposed to various environments, resulting in reinforcement corrosion due to moisture and ions penetration. Reinforced concrete corrosion causes a decrease in the durability performance of reinforced concrete structures. One solution to mitigate such issues is using FRP rebars, which offer several advantages such as high tensile strength, corrosion resistance, and light-weight than conventional rebars, in reinforced concrete instead of conventional steel rebars. The FRP rebar used should be examined at the limit state because FRP reinforced concrete has linear behavior until its fracture and can generate excessive deflection due to the low elastic modulus. It should be considered while designing FRP reinforced concrete for flexure. In the ultimate limit state, the flexural strength of FRP reinforced concrete as per ACI 440.1R is significantly lower than the flexural strength by applying both the environmental reduction and strength reduction factors accounting for the material uncertainty of FRP rebar. Therefore, in this study, the experimental results were compared with the deflection of the proposed effective moment of inertia referring to the local and international standards. The experimental results of GFRP and BFRP reinforced concrete were compared with the flexural strength as determined by ACI 440.1R and Fib bulletin 40. The flexural strength obtained by the experimental results was more similar to that obtained by Fib bulletin 40 than ACI 440.1R. The flexural strength of ACI 440.1R was conservatively evaluated in the tension-controlled section.