• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.792-799
• /
• 1998

Further improvement of existing $H_{2}O/LiBr$ absorption refrigeration machine is absolutely neces-sary to promote the utilization of gas-cooling system Among various methods to improve the per-formance of the absorption refrigeration machine this research has focused on the use of a new working fluid that has better properties than the existing $H_{2}O/LiBr$ working fluid. In the series of the research, $H_{2}O/LiBr+HO{(CH_{2})}_{3}OH$ system was selected as the most promisable candidate. The absorption refrigeration machine is water-cooled double-effect, $H_{2}O/LiBr+HO{(CH_{2})}_{3}OH$ sys-tem with series flow type. In this study we found out the characteristic of new working solution through the cycle simulation and compared the result with that of LiBr solution to evaluate. Theoptimum designs and operating conditions were determined based on the operating constraints and the coefficient of performance. Results demonstrate that new working fluid subsrantially increases COP by as much as 10% and has a wider working range with 8% higher crystallization limits compared to the conventional $H_{2}O/LiBr$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.7
• /
• pp.360-365
• /
• 2017

Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.839-846
• /
• 2007

In this paper, the first attempt to design a novel structure of dual-band feedforward linear power amplifier(FFW LPA) was presented. Up to now, primary technical difficulty has been the extension of the conventional signal canceller to the dual-band operation. Therefore, we propose the design technique of the dual-band equal group delayed carrier canceller, the dual-band equal group delayed intermodulation distortion(IMD) canceller and the dual-band FFW LPA. The operation frequency bands of the implemented dual-band FFW LPA are digital cellular($f_0=880$ MHz) and IMT-2000($f_0=2.14$ GHz) band, which are separated about 1.26 GHz. With the high power amplifier of 120 W PEP for commercial base-station application, IMD cancellation loop shows 20.45 dB and 25.04 dB loop suppression at each band of operation for 100 MHz. From the adjacent channel leakage ratio(ACLR) measurement with CDMA IS-95A 4FA and WCDMA 4FA signal, we obtained 16.52 dB improvement at the average output power of 41.5 dBm for digital cellular band, and 18.59 dB improvement at the average output power of 40 dBm for IMT-2000 band simultaneously.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.199-207
• /
• 2003

In the combat environments at the sea, the naval ships should have enough structural integrity to perform the task under the enemy's attack and possible damages. Although the naval ships can be damaged from the enemy's attack, those damages should be minimized and the naval ships must maintain their combat capabilities continuously after recoveries from the damages. Therefore, it is ve교 important for modem naval ships, especially combat naval ships, to ensure the survivability. This paper reviewed the developing procedure for the technique of the naval ships structures and described method, especially box girder system considering survivability. The efficiency of box girder is examined by numerical simulation, and it is found that the establishment of box girder is a good design method to improve the survivability.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.287-294
• /
• 1996

An optical phase modulator is fabricated in GaAs/AlGaAs doble heterostructure wafer grown by MOCVD. A self-aligned process, in which the same photoresist pattern is used for both the waveguide etching and the insulation layer formation, is developed and is found to be very useful, Fabry-Perot interference technique is applied to the measurement and the phase modulation efficiency is measured to be 22.5$^{\circ}$/Vmm at 1.31 ${\mu}{\textrm}{m}$ for TE polarization.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.19-20
• /
• 2012

본 논문은 독립 다상 대용량 전동기의 상수 전환 기법에 관한 것이다. 독립 다상 전동기는 DC단 전압 이용률이 높고 고장에 강한 특성을 가지는 장점이 있지만, 많은 스위치 개수로 인하여 높은 스위칭 손실이 발생한다는 단점 역시 존재한다. 그러므로 저속 영역에서 독립된 다상 중 일부를 직렬 연결하여 상의 수를 감소시켜 저출력 영역에서의 효율을 개선할수 있다. 제안된 방법은 전류가 비도통 되는 구간에서 독립다상 BLDC 전동기의 일부 상을 순차적으로 직렬 연결함으로써 상수전환으로 인한 토크 맥동을 야기시키지 않으며 스위치의 스트레스를 줄일수 있고, 수명을 연장할수 있다. 제안된 방법의 효용성은 시뮬레이션을 통해서 증명하였다.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.300-305
• /
• 2009

High-rise buildings have some problems by stack effect. And, the solutions on the problems should be determined by considering an overall building. But, ordinarily, the countermeasures on the problems are applied to local part of the building. Local countermeasures often can be possible to arouse the secondary problems accompanied by the stack-effect. In this study, the usefulness of local countermeasures are evaluated in terms of both the reduction effect on problems and the possible secondary problems with simulations. The simulation results show that the application of countermeasures on an overall building is very important and that local countermeasures can be used optionally according to building's conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.103.1-103.1
• /
• 2011

고체 산화물 연료전지(SOFC)는 크게 음극(anode), 양극(cathode), 전해질(electrolyte)로 구성되 있으며 연결자를 통해 직렬 또는 병렬로 연결된 형태로 발전장치 등에 활용되고 있다. 이중 연료의 산화반응을 담당하고 있는 연료전지의 음극으로 지금까지 Cobalt, Platinum, Palladium 등의 전이금속 또는 귀금속들이 사용되었지만 현재는 Nickel 또는 Nickel을 함유한 물질들 특히, Ni-YSZ 복합체가 주로 사용되고 있다. Ni-YSZ 복합체는 가격과 성능 등 여러가지 면에서 SOFC의 음극으로 사용하기에 가장 적합한 물질인데 특히 전지의 지지체 역할과 동시에 전극으로서의 역할도 병행해야하는 음극 지지형 SOFC의 경우 Ni-YSZ 복합체의 효용성을 더욱 커지게 된다. 본 연구에서는 SOFC의 음극물질로 가장 널리 쓰이고 있는 Ni-YSZ 복합체를 core shell 형태로 만들어 전도 path를 효율적으로 하고 그 특성을 최적화하기 위한 미세구조 및 소결 거동, 전기적 특성을 평가하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.282-283
• /
• 2020

3상 컨버터에서 스위치의 개방고장이 발생한 경우 고장 전류에 직류 및 고조파 성분이 발생할 수 있으며, 보호회로에 의한 고장 감지가 어려우므로 주변 기기에 2차 고장이 발생할 수 있다. 단일 및 이중 스위치 개방고장의 경우 21가지 고장 모드가 존재한다. 본 논문에서는 이러한 고장 모드를 진단하기 위해 정지 좌표계 d-q축 전류의 직류 및 고조파 성분을 활용하는 two-step 구조의 ANN(Artificial Neural Network)을 제안한다. 고장 시에 발생된 직류 및 고조파 성분 전류는 ADALINE(Adaptive-Linear Neuron)을 통해 얻는다. 고장 진단의 첫 번째 단계에서는 직류 성분을 기반으로 ANN을 이용하여 고장모드를 6개 영역으로 분류한다. 두 번째 단계에서는 6개의 각 영역에서 직류 성분과 전류의 THD(Total Harmonics Distortion)를 기반으로 ANN을 이용하여 개방고장이 발생한 스위치를 진단한다. 제안된 Two-step 방법으로 고장을 진단하므로써 간단한 구조로 ANN의 설계가 가능하다. 3.7kW급 3상 PWM 컨버터로 실험을 통해 제안된 방법의 효용성을 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1061-1068
• /
• 2013

This study predicts distillate productions according to design variables by numerical analysis when the waste heat from a diesel generator is added to the solar-assisted still proposed in a previous study. Mathematical models were set up in reference to previous studies, and the amount of heat exchange from the waste heat recovery pipe was considered. To ensure the reliability of numerical analysis, the result was compared with that of a previous study and then, the distillate productions according to design variables were obtained by the analysis model. The results were found to generally be in agreement, and the increasing amount of distillate production of the still with the added waste heat was confirmed. In addition, the optimal value of the tilt angle of glass cover and the number of cells were determined by numerical analysis.