• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.80-86
• /
• 2009

In this paper, we present a new charge pump circuit feasible for the implementation with standard twin-well CMOS process technology. The proposed charge pump employs PMOS-switching dual charge-transfer paths and a simple two-phase clock. Since charge transfer switches are fully turned on during each half of clock cycle, they transfer charges completely from the present stage to the next stage without suffering threshold voltage drop. During one clock cycle, the pump transfers charges twice through two pumping paths which are operating alternately. The performance comparison by simulations and measurements demonstrates that the proposed charge pump exhibits the higher output voltage, the larger output current and a better power efficiency over the traditional twin-well charge pumps.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.755-764
• /
• 2001

In this paper, we propose maximum likelihood (ML) decision feedback channel estimation (DFCE) for M-ary orthogonal modulation in direct sequence/code division multiple access (DS/CDMA) systems. The proposed DFCE uses the maximum combiner output in a RAKE receiver as decision feedback information, enabling M-ary orthogonal signals to be demodulated coherently and a RAKE receiver to use a em maximal ration combining (MRC) scheme. However, the performance of the proposed DFCE in the multiuser environment is severely degraded due to multiple access interference (MAI). To overcome this problem, a multistage parallel interference cancellation (PIC) scheme is combined with the proposed DFCE for multiuser environments. Accurate knowledge of the channel coefficient estimated by the proposed DFCE is used to regenerate the signal of each user for the multistage PIC scheme. According to the results of our simulations, the performance of coherent demodulation using the proposed system is significantly improved in comparison with conventional noncoherent demodulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.817-820
• /
• 2018

In this letter, a compact multiple-input multiple-output(MIMO) antenna design for a 2.4 GHz wireless local area network(WLAN) band is proposed for use in smart glasses. To miniaturize the MIMO antenna system, a ground plane is employed within the antenna and a T-shaped ground is proposed. To achieve wideband isolation, dual resonance is formed by the ground mode. One resonance is created by the T-shaped ground and the second resonance is created by adding a slot and a capacitor between the two feed lines. The measurements show that the reflection coefficient characteristic was less than -5.1 dB, whereas the isolation obtained was less than -20 dB. The diversity performance was evaluated using the measured two-dimensional radiation patterns, and the envelope correlation coefficient(ECC) values achieved in the target band(2.4~2.5 GHz) were less than 0.1.

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2015

In general, natural gas is used as GHP(Gas Engine Driven Heat Pump) fuel. On this study, the influences of different natural gas heating value on GHP were evaluated. As a result of engine test & field test using low heating value gas($9,800kcal/Nm^3$) as fuel, the engine power was reduced slightly, however the performance of start-up, the stability of operation and the characteristics of emission gas were almost similar. So it is considered that the normal operation of GHP is possible without any tuning when the low heating value($9,800kcal/Nm^3$) of natural gas was used as fuel.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.139-145
• /
• 2002

The flow zone through propeller jets are used in evaluating the environmental and constructional effects of navigation on the waterway. It relies on the characteristics of ships and water depth. A numerical model using the momentum theory of the propeller and Shield's diagram was developed in a restricted waterway. Equations for discharge are presented based on thrust coefficients and propeller speed and are the most accurate means of defining discharge. Approximate methods for discharge are developed based on applied ship's power. Equations for discharge are as a function of applied power, propeller diameter, and ship speed. Water depth of the waterway and draft of the shop are also necessary for the calculation of the grain size of the initial motion. The velocity distribution of discharge from the propeller was simulated by the Gaussian normal distribution function. The shear velocity and shear stress were from the Sternberg's formula. Case studies to show the influence of significant factors on sediment movement induced by the ship's propeller at the channel bottom are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.973-982
• /
• 2004

High-speed scheduling algorithms are required for high-performance input-queued switches to achieve good performance. Various Round-Robin scheduling algonthms for Virtual-Output-Queue (VOQ) switch architectures have been proposed, hke iSLIP, DRRM (Dual Round-Robin Matching). iSLIP can achieve high performance and have already been implemented in hardware. DRRM has been proved to achieve better performance and simpler than iSLIP But neither iSLIP nor DRRM can efficiently solve the problem of the Round-Robm pointers' desynchronization. In this paper, we have proposed "Well-Regulated Pseudo-request Dual Round-Robin Matching" Algorithm. It is developed from DRRM, and can always keep the pointers' desynchronization. Since our algorithm is based on the Round-Robin scheduling, it is also simple to be implemented. And simulation results also show that our proposed algonthm performs pretty well under various, traffic models.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.284-294
• /
• 1992

합성용질확산법으로 GaP단결정을 성장시키고 몇가지 성질을 조사하였다. 정지상태에서 결정의 성장속도는 1.75[mm/day]이었고 결정성장용 석영관을 전기로내에서 하강시키므로써 양질의 GaP 단결정을 성장하였다. 에치피트밀도는 결정의 성장축 방향으로 3.8*$10^{4}$[$cm^{-2}$]부터 2.3*$10^{5}$[$cm^{-2}$] 까지 증가하였다. 성장된 GaP결정의 이동도와 캐리어농도는 실온에서 197.49[$cm^{2}$/V.sec]와 6.75*$10^{15}$[$cm^{-3}$]이었고 77K의 온도에서는 266.91[$cm^{2}$ /V.sec]와 3.13*$10^{14}$[$cm^{-3}$]이었다. 에너지갭의 온도의존성은 실험적으로 $E_{g}$(T)=2.3383-(6.082*$10^{-4}$) $T^{2}$/(373.096+T)[eV]로 구하여졌다. 저온에서 측정된 광루미네센스 스펙트럼은 구속된 여기자의 복사재결합과 재결합 과정에 포논의 참여로 인하여 에너지갭 부근의 복잡한 선 스펙트럼이 나타났고 얕은 준위의 Si도너와 Zn억셉터준위 사이에서의 복사재결합 및 이에 대한 1LO, 2LO의 포논복제가 나타났으며 S $i_{Ga}$ -S $i_{p}$의 쌍방출에 의하여 1.8932[eV]에서 넓은 반치전폭의 피크가 나타났다. GaP의 적외선 흡수는 TO, LO, LA, T $A_{1}$, T $A_{2}$ 포논들의 이중결합모드와 G $a_{2}$O의 진동모드 및 Si도너와 Zn억셉터들에 의하여 일어났다. Zn를 확산시키어 제작한 p-n GaP발광다이오드는 실온에서의 발광중심피크가 6250[.angs.]이었고 최대광출력은 0.0916[mW], 양자효율은 0.51%이었다.이었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.130-137
• /
• 2013

This paper presents analog front-end(AFE) circuits for bio-potential measurement. The proposed AFE is composed of IA(instrument amplifier), BPF(band-pass filter), VGA(variable gain amplifier) and SAR(successive approximation register) type ADC. The low gm(LGM) circuits with current division technique and Miller capacitance with high gain amplifier enable IA to implement on-chip AC-coupling without external passive components. Spilt capacitor array with capacitor division technique and asynchronous control make the 12-b ADC with low power consumption and small die area. The total current consumption of proposed AFE is 6.3uA at 1.8V.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.379-386
• /
• 2005

This paper provides a rigorous theory for analysis of quantization effects and optimum filter bank design in quantized multidimensional subband filter banks. Even though subband filter design has been a hot topic for last decades, a few results have been reported on the subband filter with a quantizer. Each pdf-optimized quantizer is modeled by a nonlinear gain-plus-additive uncorrelated noise and embedded into the subband structure. Using polyphase decomposition of the analysis/synthesis filter banks, we derive the exact expression for the output mean square quantization error. Based on the minimization of the output mean square error, the technique for optimal filter design methodology is developed. Numerical design examples for optimum nonseparable paraunitary and biorthogonal filter banks are presented with a quincunx subsampling lattice. Through the simulation, $10\~20\;\%$ decreases in MSE have been observed compared with subband filter with no quantizers especially for low bit rate cases.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.193-200
• /
• 2007

Natural gas is one of the most promising alternatives to gasoline and diesel fuels because of its lower harmful emissions, including $CO_2$, and high thermal efficiency. In particular, natural gas is seen as an alternative fuel for heavy-duty Diesel Engines because of the lower resulting emissions of PM, $CO_2$ and $NO_x$. Almost all CNG vehicles use the PFI-type Engine. However, PFI-type CNG Engines have a lower brake horse power, because of reduced volumetric efficiency and lower burning speed. This is a result of gaseous charge and the time losses increase as compared with the DI-type. This study was conducted to investigate the effect of injection conditions (early injection mode, late injection mode) on the combustion phenomena and performances in the or CNG Engine. A DI Diesel Engine with the same specifications used in a previous study was modified to a DI CNG Engine, and injection pressure was constantly kept at 60bar by a two-stage pressure-reducing type regulator. In this study, excess air ratios were varied from 1.0 to the lean limit, at the load conditions 50% throttle open rate and 1700rpm. The combustion characteristics of the or CNG Engine - such as in-cylinder pressure, indicated thermal efficiency, cycle-by-cycle variation, combustion duration and emissions - were investigated. Through this method, it was possible to verify that the combustion duration, the lean limit and the emissions were improved by control of injection timing and the stratified mixture conditions. And combustion duration is affected by not only excess air ratio, injection timing and position of piston but gas flow condition.