• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.75-86
• /
• 2009

Salt, one of the most common soluble materials in engineering soil, may have an effect on mechanical behaviors of soils under its cementation process. In order to investigate this natural phenomenon, non-soluble material by using glass beads is mixed with salt electrolyte and cemented by using oven to evaporate water. Three different sizes of glass bead particles, 0.26, 0.5, and 1.29 mm, with different salt concentration, 0, 0.1, 0.2, 0.5, 1.0, and 2.0M, are explored by using P- and S-waves, excited by bender elements and piezo disk elemets, respectively. The velocities of the P-wave and S-wave of the particulate medium cemented by salt show three stages with the degree of saturation: 1) S-wave velocities increase while P-wave velocities reduce with degree of saturation changing from 100% to 90%; 2) Both velocities are stable with degree of saturation varying from 90% to 10%; 3) The velocities change enormously when the specimens are nearly dry with degree of saturation from 10% to 0%. Besides, the resonance frequencies of S-wave show similar stages to the S-wave velocities. This study demonstrates meaningful trends of elastic wave characteristics of geo-materials according to the cementation of dissolved salt.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.10
• /
• pp.111-122
• /
• 2009

Dissolution of some of geo-materials may yield the loss of the soil strength and the settlement of earth structures. The goal of this study is to monitor the several physical behaviors of soluble mixtures during dissolution. Sand-salt mixtures are used to monitor the meso to macro response including the settlements and shear waves. The mixtures of photoelastic and ice disks are used to monitor micro to meso behavior of soluble mixture including the void ratio, force chain, coordination number and horizontal force changes. In the sand-salt mixtures, shear waves are measured by using bender elements in conventional oedometer cells. In the photoelastic disk - ice disk mixtures, micro to meso response are measured by digital images and load cells. The shear wave velocity decreases at the initial stage of the dissolution, and then increases and approaches to asymptotic value. The larger dissoluble particle and the more random packing produces the severe horizontal fore change. After dissolution, the void increases and the coordination number decreases. This study demonstrates that the particle level behavior such as the changes of the force chain, void ratio, and coordination number affects the global behavior such as the change of the shear wave velocity and horizontal force of the system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.6
• /
• pp.638-646
• /
• 2023

Recently, active research has been conducted to enhance the power characteristics and thermal stability of lithium-ion batteries (LiBs) by modifying separators using a ceramic coating method. However, since the thermal properties and surface features of the separator vary depending on the characteristics of the ceramic powders applied to the separator, it is crucial to manufacture ceramic powders optimized for the separator's performance. In this study, we evaluated the characteristics of three types of α-alumina (A-1, A-2, and A-3) produced with varying dispersant contents and milling times, in addition to commercial α-alumina (AES-11). Subsequently, the optimized powders (A-3) were coated onto the separator using an aqueous binder for comparison with the characteristics of an AES-11 coated separator and an uncoated PE separator. The A-3 coated separator improved electrolyte wettability with a low contact angle (44.69°) and increased puncture strength (538 gf). Furthermore, it exhibited excellent thermal stability, with a shrinkage value of 5.64% when exposed to 140℃ for 1 hour, compared to the AES11 coated separator (6.09%) and the bare PE separator (69.64%).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.992-1001
• /
• 2023

OWEC (Overtopping Wave Energy Converter) is a wave power generation system using the wave overtopping. The performance and safety of the OWEC are affected by wave characteristics, such as wave height, period. To mitigate this issue, optimal OWEC designs based on wave characteristics must be investigated. In this study, the environmental conditions along the Ulleungdo coast were used. The hydraulic efficiency of the OWEC was calculated using SPH (Smoothed Particle Hydrodynamics) by comparing 4 models that changed the substructure. As a result, it was possible to change the substructure. Through design optimization, a new truss-type structure, which is a substructure capable of carrying the design load, was proposed. Through a case study using member diameter and thickness as design variables, structural safety was secured under allowable stress conditions. Considering wave load, the natural frequency of the proposed structure was compared with the wave period of the relevant sea area. Harmonic response analysis was performed using wave with a 1-year return period as the load. The proposed substructure had a reduced response magnitude at the same exciting force, and achieved weight reduction of more than 32%.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.2
• /
• pp.41-47
• /
• 2024

When there were disparities in performance between models trained in the time and frequency domains, even after conducting an ensemble, we observed that the performance of the ensemble was compromised due to imbalances in the individual model performances. Therefore, this paper proposes a leakage detection technique to enhance the accuracy of pipeline leakage detection through a step-wise learning approach that extracts features from both the time and frequency domains and integrates them. This method involves a two-step learning process. In the Stage 1, independent model training is conducted in the time and frequency domains to effectively extract crucial features from the provided data in each domain. In Stage 2, the pre-trained models were utilized by removing their respective classifiers. Subsequently, the features from both domains were fused, and a new classifier was added for retraining. The proposed transfer learning-based feature fusion technique in this paper performs model training by integrating features extracted from the time and frequency domains. This integration exploits the complementary nature of features from both domains, allowing the model to leverage diverse information. As a result, it achieved a high accuracy of 99.88%, demonstrating outstanding performance in pipeline leakage detection.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.43-48
• /
• 2024

The discovery of a two-dimensional electron gas (2DEG) at the interface of LaAlO₃ (LAO) and SrTiO₃ (STO) substrates has sparked significant interest, providing a foundation for cutting-edge research in electronic devices based on complex oxide heterostructures. However, conventional methods for producing LAO thin films, typically employing techniques like pulsed laser deposition (PLD) within physical vapor deposition (PVD), are associated with high costs and challenges in precisely controlling the La and Al composition within LAO. In this study, we adopted a cost-effective alternative approach-solution-based processing-to fabricate LAO thin films and investigated their electrical properties. By adjusting the concentration of the precursor solution, we varied the thickness of LAO films from 2 to 65 nm and determined the sheet resistance and carrier density for each thickness. After vacuum annealing, the sheet resistance of the conductive channel ranged from 0.015 to 0.020 Ω·s^-1, indicating that electron conduction occurs not only at the LAO/STO interface but also into the STO bulk region, consistent with previous studies. These findings demonstrate the successful formation and control of 2DEG through solution-based processing, offering the potential to reduce process costs and broaden the scope of applications in electronic device manufacturing.

• Journal of Life Science
• /
• v.22 no.7
• /
• pp.871-879
• /
• 2012

Polyploids are a potentially important germplasm source in seedless citrus breeding program. Seedlessness is one of the most promising traits of commercial mandarin breeds that mandarin triploid hybrids possess permanently. The formation of new constant triploid hybrids can be recovered through diploid species hybridization from the fusion of divalent gametes at low frequencyor intra-and inter-ploidy crosses. However, extensive breeding work based on small $F_1$ hybrid seeds developed is impossible without a very effective aseptic methodology and ploidy event. In this study, in vitro embryo culture was employed to recover natural hybrids from monoembryonic diploid, open-pollinated mandarin. Flow cytometry was used to determine ploidy level. A total of 10,289 seeds were extracted from 792 fruits having approximately 13 seeds per fruit. Average frequency of small seeds developed was 7.1%, while the average frequency of small seeds per fruit were: 8.9% for 'Clementine' 10.2% for 'Harehime' 2.6% for 'Kamja' 3.1% for 'Pyunkyool' 2.8% for 'Sadookam' and 7.0% for 'Wilking' mandarin. Average size of a perfect seed was $49.52{\pm}0.07mm^2$ ('Clementine') while the small seed measured $7.95{\pm}0.04mm^2$ ('Clementine'), which was about 1/6 smaller than the perfect seed. In total, 731 small seeds were obtained and all of them contained only one embryo per seed. The efficiency of 'Clementine' was 14 times higher than 'Wilking' and more than 109 times higher than 'Pyunkyool'. The basic information on spontaneous polyploidy provides for the hybridization of constant triploids and increases the efficiency of conventional cross.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.1-17
• /
• 1977

Nitrogen responses to yield and other agronomic characters were studied using four rice varieties, Tongil, Jinheung, Milyang 23, and Yushin, at six nitrogen levels, 0, 10, 15, 20, 25 and 30kg/10a, in a silt loam soil at the Crop Experiment Station, Suweon, Korea, in 1976. Grain yields of Milyang 23 and Tongil were much higher than those of Jinheung and Yushin at high nitrogen levels (15-30kg/10a). Optimum nitrogen levels of the rice varieties, Tongil, Milyng 23, Yushin, and Jinheung, estimated by intersecting straight line, were 22, 19, 19, and 12kg/10a, respectively. Morpshological characters, dry matter production before and after heading, and yield components were dicussed in relation to the nitrogen responsivenees of the rice varieties. In addition, relationships between yield, yield components, and other agronomic characters were discussed to obtain some informations for higher rice yield.

• The Journal of the Korean Society for Microbiology
• /
• v.15 no.1
• /
• pp.77-84
• /
• 1980

The purpose of this paper is to study the incidence of humoral antibody to reovirus type 2 in the sera of the Koreans and animal(swine) at random. All the 614 of human beings and 877 of swine sera were collected during the period from June to December, 1979, from the healthy persons in the National Seoul Hospital and swine blood was collected from 25 different areas of June to 30th of September in 1977. The HI test was put with plastic plates according to the methods by Rosen(1960 a and 1974). The total 73.29% of the 614 cases in human and the 61.80% of the 877 in swine confirmed as a hemagglutination inhibition antibodies. In human the 76.47% of the 442 male cases and the 65.12% of the 172 female ones were confirmed to have humoral antibodies. The positive rate was widely shown in each age group. But the 31 to 50 old age groups showed a little higher than any other age group, which came to the 85.71% in 41-50 and the 78.72% in 31-40 old age groups. The monthly distribution of HI antibody was shown to reach the 93.22% of the 59 cases in June. This per cent was much higher than of any other distribution. Accordingly, the auther came to the conclusion that there is reovirus type 2 in all the parts of Korea and most of the Koreans have the higher rates of antibody. However, the positive rate of antibody was the 542 out of the 877 cases(61.8%) from the swine and antibodies was confirmed from the 25 different areas in Korea. The seasonal distribution of the antibody showed these high rates. In domestics animals; blood from the swine showed that distribution of HI antibodies to reoviras type 2. These antibody appears from the various areas of the province in Korea. For this reasons, reovirus was widely distributed in this country.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.