• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.399-399
• /
• 2012

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 나노시트(nanosheet)[1]나 붕소 탄화질화물(boron caronitride;BCN) 나노시트[2, 3]와 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 나노시트로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 폴리스틸렌(polystyrene)과 보레인 암모니아(borane ammonia)를 사용하여 BCN 나노시트를 합성하였다. 합성된 BCN 나노시트의 구조적 특징과 화학적 조성 및 결합 상태를 주사전자현미경(scanning electron microscopy), 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy), 라만 분광법(Raman spectroscopy)을 통해 조사하였고, 이온성 용액법 (ionic liquid)[4]을 이용하여 전계효과 특성을 측정하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.403-403
• /
• 2012

그래핀(graphene)은 우수한 전기적, 물리적인 특성을 지닌 물질로써 다양한 분야에서 이를 활용하려는 노력들이 활발히 진행되고 있다. 그중 그래핀을 채널로 이용하는 전계효과 트랜지스터(field effect transistor)로의 응용에 있어, 가장 핵심적인 도전과제는 전하농도(carrier concentration)의 제어 및 에너지 밴드갭(energy bandgap) 형성이라 할수 있다. 최근 다양한 물질을 이용한 도핑을 통해 이를 해결하기 위한 노력들이 진행되고 있는 추세이다. 본 연구에서는 열화학 기상 증착법(Thermal chemical vapor deposition)을 통해 합성된 단일층의 그래핀에 염화니켈 나노입자의 분산액을 스핀코팅 한후 열처리를 통해 그래핀-니켈 나노입자의 하이브리드 구조를 제작하였다. 제작된 그래핀-니켈 나노입자 하이브리드 물질의 구조적 특징을 주사 전자 현미경(Scanning electron microscope)과 원자힘 현미경(Atomic force microscopy)을 통하여 확인하였다. 또한 니켈 분산액의 농도와 도핑효과 와의 상관관계를 라만분광법(Raman spectroscopy)과 이온성 용액법(Ionic liquid)을 이용한 전계효과 특성분석을 통해 조사하였다. 나노입자의 형성 메커니즘은 X-선 광전자 분광법(X-ray photoelectron spectroscopy)을 통하여 규명하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.100-104
• /
• 2000

Diamond film was deposited on Si substrate by using microwave plasma-enhanced chemical vapor deposition (MPECVD) system. After thinning the cross section between diamond film and Si substrate by ion milling method, we investigated its interface via transmission electron microscopy We could observe that the diamond film was grown either directly on Si substrate or via the interlayer between diamond film and Si substrate. Thickness of the interlayer was varied along the cross section. The interlayer might mainly composed of Sic andlor amorphous carbon. We could observe the well-developed electron diffraction pattern of both Si and diamond around the interface. Based on this result, we can conjecture the initial growth behavior of diamond film on Si substrate.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.295-301
• /
• 2012

The collagen-liposomes were prepared with hydrogenated phosphatidylcholine and by solvent injection method for maximum protection and stable absorption of collagen into the body. Cholesterol was added to phosphatidylcholine to increase the stability of liposome membrane. The mixture was dissolved in ethanol and propylene glycol and PBS Buffer was used to Stabilize ions. The properties collagen-liposome were analyzed by DLS, SEM and POM.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.669-671
• /
• 2016

Hydroxyapatite (HAP) was prepared by a hydrothermal synthesis method and also silver was introduced on the surface of HAP through an ion exchange reaction. The crystal phase and morphology of HAP were then evaluated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). In addition, the absorption property of HAP was characterized by diffuse reflectance UV-Vis spectroscopy. The presence of silver nanoparticles on the surface of HAP was also verified by XRD and TEM analysis. Particularly, the silver doped HAP showed an enhanced absorption property in UV-Vis region compared to that of the pristine HAP.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.761-764
• /
• 2009

Ag-Doped bioactive ceramic composites were prepared by colloidal silver solution. The physical properties of colloidal silver solution and Ag-Doped bioactive ceramic composites were characterized by Scanning electron microscopy(SEM), X-Ray Diffractometer(XRD) and Raman spectrophotometer respectively. According to XRD, we have identified that the chloride ion was chemically attached silver nano particles. SEM studies showed that silver chloride phases were homogeneously distributed on the Ag-Doped bioactive ceramic composites surface. Finally, we concluded that the silver chloride phase on the Ag-Doped bioactive ceramic composites surface was strongly prevent formation of Ag-hydroxyapatite.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.286-290
• /
• 2010

Liquid-crystalline (LC) monomer, which was functionalized with a coumarin group on their extremity, was synthesized by UV light irradiation in their LC phases. LC monomer was converted into the dimers by the cycloaddition reaction of the coumarin group, and the LC phases were maintained after photodimerization reaction. The dimers showed LC phases in the wider temperature range than those of the corresponding monomer. Structures of the compound were identified by FT IR and $^1H$ NMR spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry (DSC), gel permeating chromatography (GPC) and polarized optical microscopy (POM). From optical polarizing microscopy, the prepared polymer shows enantiotropic liquid crystallinity with smectic and nematic textures.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.109-118
• /
• 2021

In the periodic surveillance material test for the spacer component of fuel channel assembly in CANDU, a microstructural characterization analysis is required in addition to the mechanical property evaluation test. In this study, detailed microstructure analysis and simple mechanical property evaluation of archive spacer parts were conducted to indirectly support the surveillance test and assist in the study of spacer material degradation. We investigated the microstructural characteristics of the spacer garter spring coil through comparative analysis with the plate material. The main microstructure characteristics of the garter spring coil X-750 are represented by the fine grain size distribution, the ordering phase distribution developed inside the matrix, the high dislocation density inside the grains, and the arrangement of coarse carbides. In addition, the yield strength of the garter spring coil X-750 was indirectly evaluated to be approximately 1 GPa. We also established an analytical method to elucidate the microstructural evolution of the radioactive spacer garter spring coil X-750 based on Canadian research experiences. Finally, we confirmed the measurement technique for helium bubble formation through TEM examination on the helium implanted X-750 material.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.95-100
• /
• 2012

$LiFePO_4$ is an attractive cathode material due to its low cost, good cyclability and safety. But it has low ionic conductivity and working voltage impose a limitation on its application for commercial products. In order to solve these problems, the iron($Fe^{2+}$)site in $LiFePO_4$ can be substituted with other transition metal ions such as $Mn^{2+}$ in pursuance of increase the working voltage. Also, reducing the size of electrode materials to nanometer scale can improve the power density because of a larger electrode-electrolyte contact area and shorter diffusion lengths for Li ions in crystals. Therefore, we chose electrospinning as a general method to prepare $Li[Fe_{0.9}Mn_{0.1}]PO_4$ to increase the surface area. Also, there have been very a few reports on the synthesis of cathode materials by electrospinning method for Lithium ion batteries. The morphology and nanostructure of the obtained $Li[Fe_{0.9}Mn_{0.1}]PO_4$ nanofibers were characterized using scanning electron microscopy(SEM). X-ray diffraction(XRD) measurements were also carried out in order to determine the structure of $Li[Fe_{0.9}Mn_{0.1}]PO_4$ nanofibers. Electrochemical properties of $Li[Fe_{0.9}Mn_{0.1}]PO_4$ were investigated with charge/discharge measurements, electrochemical impedance spectroscopy measurements(EIS).

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.299-306
• /
• 2017

In this research, it was examined chloride ion penetration resistance of slag-replaced concrete and cementless slag concrete considering marine environmental exposure conditions of splash zone, tidal zone and immersion zone. In the design strength of grade 24 MPa, the specimens were tested to determine their compressive strength, scanning electron microscopy images and chloride migration coefficient. Further, chloride ion penetration depth and carbonation depth of specimens exposed to marine environment were measured. Experimental results confirm that chloride migration coefficient of specimens tended to decrease with increasing the replacement ratio of ground granulated blast-furnace slag in accelerated laboratory test. In addition, the specimens exposed to the tidal zone were found to be the greatest chloride ion penetration depth compared to splash zone and immersion zone. On the other hand, the chloride ion penetration depth of the specimens exposed to splash zone tended to increase with increasing the replacement ratio of ground granulated blast-furnace slag in contrast with the results for the tidal zone and immersion zone.