• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.39.4-40
• /
• 2009

이 연구의 목적은 고해상도 합성개구레이더 센서를 탑재한 관측위성의 운용요구사항에 맞춰 임무기간 동안 관측 목표지역을 주기적으로 반복하고 지상궤적을 $\pm2km$ 범위 내에서 안정성을 갖도록 유지 조정하는 궤도제어 알고리즘 연구를 수행하는데 있다. 기존에 수행되어 왔던 지상궤적에 대한 오차를 해석적으로 계산하여 궤도를 유지 조정하는 방법이 아닌 기준궤도에 대하여 상대좌표계에서 표현된 위성의 실제 접촉궤도를 기준궤도와 직접적으로 비교하여 목표궤적을 유지 조정하는 알고리즘을 연구하였다. 이를 위해 첫째, 고해상도 관측위성의 운용요구사항을 만족하는 계획된 목표궤도인 기준궤도를 설계하였다. 기본적으로 기준궤도는 임무 설계 시 완전한 주기성이 고려된 최대한 실제에 가까운 궤도이기 때문에 지구중력장 모델만을 고려하여 간략하게 설계하였다. 둘째, 실제의 인공위성의 궤도는 계획된 기준궤도를 유지해야 하지만 시간에 따라 섭동력의 영향을 받아 계획된 궤도로부터 벗어나게 된다. 기준궤도로부터 실제궤도가 얼마나 벗어나는지에 대한 정량적 분석을 위해 지구 중력장, 달-태양 중력, 대기저항력, 태양복사압, 조석력 등과 같은 다양한 섭동력의 영향에 대한 분석을 수행하였다. 셋째, 반경방향(radial), 진행방향(along-track), 교차방향(cross-track)의 세 방향의 성분으로 구성된 우주공간오차(Space Error) 개념을 적용하여, 투영된 지상궤적에 상응하는 오차를 계산하는 것 보다 안정적으로 오차를 계산하였다. 또한 운용요구사항에 따라 허용된 범위 내에서 궤도를 유지하기 위해 GVE(Gauss Variation Equation)을 이용한 궤도조정을 수행하였다. 섭동력의 분석 결과로부터 지구대기저항력, 달-태양 중력으로 인해 가장 두드러지는 장반경과 궤도이심률의 변화를 조정하기 위해, 임무에 사용되는 추력기의 연료 효율을 고려하여 동결궤도가 유지될 수 있는 최적의 위도이각에서 In-plane에 대한 궤도조정만을 수행하여 장반경과 이심률을 동시에 조정하였다. 지구대기와 태양활동의 영향으로 시간에 따른 장반경의 변화율에 따라 궤도조정 주기를 가지는 것을 알 수 있었고, 이 변화율 때문에 생기는 우주공간오차의 증가를 보정하여 위성의 지상궤적을 목표범위 안에서 유지할 수 있었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.219-225
• /
• 2013

Program and erase characteristics of the elliptic gate all around (e-GAA) SONOS cell have been studied as the variation of eccentricity of the channel. An analytic program and erase model for the elliptic GAA SONOS cell is proposed and evaluated. The model shows that the ISPP (incremental-step-pulse programming) property is changed non-linearly as the eccentricity of the e-GAA SONOS cell is increased. It is differently from the well known linear relationship for that of 2D SONOS and even 3D circular SONOS cell with program bias. We can find that the simulation results of ISPP characteristics are in accord with the experimental data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6391-6396
• /
• 2015

In order to investigate characteristics of the von Mises yield criterion under 2 dimensional stress condition, two cases of plane strain were studied. One of which was for zero elastic strain and the other was for zero plastic strain increment. Yield functions for the plane strain condition for zero elastic strain and for the plane stress condition were represented as ellipse and the two yield functions were compared by ratios of major axis, minor axis and eccentricity and it was seen that the ratio of minor axis was the same between the two cases and the ratios of major axis and eccentricity were functions of Poisson's ratio. Region of elastic behavior obtained from considering plane strain condition of zero elastic strain increases as the Poisson's ratio increases. Yield function for plane strain obtained from considering zero plastic increment and associate flow rule was displayed as straight line and the region of elastic behavior was greater than that for the case of plane stress.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.1
• /
• pp.83-91
• /
• 2004

The purposes of the study was to measure attitude and satisfaction concerning the service quality of university foodservices. The survey was conducted to 500 university students using questionnaires, of which 457 questionnaires were analyzed. A statistical data analysis was completed using SAS programs by the descriptive analysis. The results of the study were summerized as follows: 1) The mean frequencies of visiting the university foodservices per week were higher in males than females. The factor affecting the students on their first choice of the foodservices depended on the distance. The first complaint factor concerning the university foodservices was the taste of foods. 2) The students were not satisfied with the service quality of university foodservices personnels. The actual mean score of the service quality was 3.92 out of 5, but the perceived one was 2.94. Therefore, the satisfaction degree of the service quality was calculated as-0.98. 3) The students were more satisfied with the food quality of contracted foodservice management than that of self-operated one.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.769-778
• /
• 2016

Technical approach on the modeling, simulation and experimentation methods, which are applied for developing a constructive simulation and engagement experimentation software for supporting light weight torpedo operational tactics study, is introduced. Conceptual modeling for the weapon engagement and simulation entities, mathematical models for the simulation elements, approach for the design of experimentations are described, and screen shots of the software are also presented as some example results of experimentation and analysis. It is found that the simulation and experimentation results are useful to support and fulfill the mission needs and requests. As a consequence, the technical approach is rated to be appropriate to accomplish the dedicated purpose of the simulation and experiments.

• Korean Journal of Community Nutrition
• /
• v.4 no.3
• /
• pp.421-430
• /
• 1999

A neural network system was applied in order to analyze the nutritional and other factors influencing chronic diseases. Five different nutrition evaluation methods including SD Score, %RDA, NAR INQ and %RDA-SD Score were utilized to facilitate nutrient data for the system. Observing top three chronic disease prediction ratio, WHR using SD Score was the most frequently quoted factor revealing the highest predication rate as 62.0%. Other high prediction rates using other data processing methods are as follows. Prediction rate with %RDA, NAR, INQ and %RDA-SD Score were 58.5%(diabetes), 53.5%(hyperlipidemia), 51.6%(diabetes), and 58.0%(diabetes)respectively. Higher prediction rate was observed using either NAR or INQ for obesity as 51.7% and 50.9% compared to the previous result using SD Score. After reviewing appearance rate for all chronic disease and for various data processing method used, it was found that iron and vitamin C were the most frequently cited factors resulting in high prediction rate.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.781-787
• /
• 2011

Mine countermeasure missions(MCMs) may induce the loss of human and ship because of the covert of mine. In recent years, unmanned underwater vehicles(UUVs) have emerged as viable technical solution for conductimg underwater search, surveillance, and clearance operations in support of mine countermeasure missions because of her autonomy and long time endurance capability. This paper introduces a technical approach to mine countermeasure mission effectiveness analysis and presents some simulation-based analysis results for engineering of the UUV system definition which could be support analysis of alternatives for system definition and design.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.155-158
• /
• 2006

한국 남해안 거제도 앞바다에 투하된 인공용승구조물에 대한 유통 변화를 파악하기 위해 ADCP(Acoustic Doppler Current Profiler)를 선박에 장착하여 정선관측을 실시하였다. 관측결과 구조물 투하전과 후의 유통비교를 보면 구조물 주변역에서 표층에서부터 수심 $30\sim40m$까지의 충과 그 이심까지의 흐름이 다르게 나타났다. 또한 구조물 주변역에서 연직유동성분의 흐름이 구조물 투하 전에는 하강류의 분포가 많이 나타났으나 구조물 투하 후에는 상승류의 성분이 많이 나타남을 알 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• v.6 no.2
• /
• pp.91-100
• /
• 1989

The mean orbital elements for geosynchronou8s satellite are developed in terms of non-singular orbital elements. The true satellite position oscillates about the position calculated from the mean elements due to short period perturbations to the satellite motion. The displacement of a geostationary satellite from this mean orbit position is less than 1800m. The mean elements of ec are obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.4
• /
• pp.7-14
• /
• 1998

Noncircular gears have been used for obtaining the modified anglualr velocity ratio between parallel axes. The elliptical gear, which is a kind of noncircular gears, makes use of ellipse as a pitch curve, and is applied for the measurement of the discharge of liquid. The applications of an elliptical gear are more advantageous than any other mechanism as like a crank-slider linkage or a cam mechanism in view of the accuracy and the reliability to transmit the prescribed motion. In this paper, acceding to the theoretical involute tooth profile, two pairs of the elliptical gears were manufactured by using CNC wire electronic discharge machine. The proper ranges of the operating pressure angle and of module not to generate under cutting are studied on the change of the eccentricity, because it is the eccentricity of the pitch curve that determines most of the characteristics of the elliptical gear and then the vibration analysis is executed for the verification of harmonious rotating.