• Title/Summary/Keyword: 이수열

Search Result 502, Processing Time 0.029 seconds

Solvent-free determination of BTEX in water using repetitive membrane extraction followed by GC-MS (반복적인 막 추출과 GC-MS를 이용한 물 중 BTEX의 분석)

  • Kim, He-Kap;Kim, Se-Young;Lee, Soo-Hyung
    • Analytical Science and Technology
    • /
    • v.24 no.5
    • /
    • pp.352-359
    • /
    • 2011
  • An analytical method for solvent-free determination of benzene, toluene, ethylbenzene, and xylenes (BTEX) in water using repetitive membrane extractions coupled to cryofocusing and GC-MS was derived. BTEX compounds that permeated through a nonporous silicone membrane from the aqueous phase and evaporated into the acceptor phase were purged into a cryofocusing trap ($-100^{\circ}C$) with helium gas. The BTEX compounds, thus enriched in the trap, were thermally desorbed into a capillary column GC and detected using an MS. The flow rate of the donor phase (30 mL water) was set at 10 mL/min, and membrane extractions, accomplished by returning the water drained from the extraction module to the sample container, were repeated three times at $20{\pm}2^{\circ}C$. Although recoveries (%) were variable, from the highest for benzene (approximately 80%) to the lowest for ethylbenzene and xylenes (3.5-10%), the method showed satisfactory precision (RSD 2.2-10%) with good-linearity calibration curves ($r^2$ 0.9976-0.9997 in 1-100 ${\mu}g$/L range) for all of the compounds. The method detection limits (MDLs) ranged from 0.16 to 1.8 ${\mu}g$/L. The results showed the method's advantages such as short analysis time and overall simplicity without solvent compared to the conventional techniques.

Screening of Effective Factor to Inhibition of NDMA Formation in Yuza (Citrus junos) (유자 중 NDMA 생성억제에 영향을 미치는 인자의 검색)

  • Shin, Jung-Hye;Lee, Jun-Yeal;Cho, Hee-Sook;Lee, Soo-Jung;Jung, Keung-Hee;Sung, Nak-Ju
    • Journal of Food Hygiene and Safety
    • /
    • v.19 no.3
    • /
    • pp.126-131
    • /
    • 2004
  • This study was conducted to investigate of inhibition activity of yuza (Citrus junos) extracts and juice on nitrite scavenging and N-nitrosodimethylamine (NDMA) formation in model system. Yuza juice was separated into organic acid, ascorbate and phenolic portion using sep-pak $C_{18}$ cartridge, respectively. Nitrite scavenging activity and inhibition of NDMA formation from yuza extract has shown higher inhibition with pH of reaction condition lower and amount of added sample more. And peel extract of yuza was higher than those of flesh extract. Nitrite scavenging activity was excellent juice portion rather that 3 portions. Of the 3 portions, it activity was the highest in the organic acid portion, and decreased in the following order; phenolic acid, ascorbate portion. Therefore, organic acid of yuza was suggested to expect effective ihhibitor of NDMA formation.

Physical and Mechanical Properties of The Lignin-based Carbon Nanofiber-reinforced Epoxy Composite (에폭시 강화 리그닌 기반 나노탄소섬유 복합재료의 특성)

  • Youe, Won-Jae;Lee, Soo-Min;Lee, Sung-Suk;Kim, Yong Sik
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.3
    • /
    • pp.406-414
    • /
    • 2016
  • The lignin-based carbon nanofiber reinforced epoxy composite has been prepared by immersing carbon nanofiber mat in epoxy resin solution in order to evaluate the physical and mechanical properties. The thermal and mechanical properties of the carbon nanofiber reinforced epoxy composite were analyzed using thermogravimetric analysis (TGA), differential scanning calorimeter (DSC) and tensile tester. It was found that the thermal properties of the carbon nanofiber reinforced epoxy composite improved, with its glass-transition temperature ($T_g$) increased from $90.7^{\circ}C$ ($T_g$ of epoxy resin itself) to $106.9^{\circ}C$. The tensile strengths of carbon nanofiber mats made from both lignin-g-PAN copolymer and PAN were 7.2 MPa and 9.4 MPa, respectively. The resulting tensile strength of lignin-based carbon nanofiber reinforced epoxy composite became 43.0 MPa, the six times higher than that of lignin-based carbon nanofiber mats. The carbon nanofibers were pulled out after the tensile test of the carbon nanofiber reinforced epoxy composite due to high tensile strength (478.8 MPa) of an individual carbon nanofiber itself as well as low interfacial adhesion between fibers and matrices, confirmed by the SEM analysis.

Pervaporation Separation of fluoroethanol/water Mixtures through Crosslinked Poly(vinyl alcohol) Composite Membranes (가교된 폴리비닐알콜 복합막을 이용한 불화에탄올/물 혼합용액의 투과증발분리 특성)

  • 이수복;안상만;장봉준;김정훈;이용택
    • Membrane Journal
    • /
    • v.14 no.2
    • /
    • pp.166-172
    • /
    • 2004
  • As a preliminary study for esterification membrane reactor used to produce 2,2,2-trifluoroethylmetacrylate (TFEMA), Pervaporation behaviors with crosslinked Poly(vinyl alcohol) composite membranes were investigated for aqueous TFEA (2,2,2-trifluoroethanol) feed solutions. In this study, crosslinked PVA composite membranes were prepared by reacting PVA with glutaraldehyde (CA)/acid catalyst onto porous polyethersulfone (PES) supports. SEH images (scanning electron microscopy) showed the thicknesses of selective coating layer was about 2-3 ${\mu}{\textrm}{m}$. The swelling tests showed the dogree of crosslinking decreased as content of the crosslinking agent, GA, increased. Total permeation flux decreased while separation factor increased as the CA content increased. As operating temperature increased, total permeation flux remarkably increased in the range of 85-95 wt% TFEA aqueous solutions. Interestingly, however, separation factor decreased in 85-90 wt% with operating temperature, while that increased in 95 wt%. In case of 90 wt% TFEA concentration and operating temperature 8$0^{\circ}C$, the PVA composite membrane crosslinked with 0.1 mol GA per PVA repeating unit showed high permeation flux of 1.5 kg/$m^2$hr and separation factor of 320. These results confirmed the applicability of the PVA composite membranes for the esterification membrane reactor of TFEMA.

Sulfonated Polystyrene/PTFE Composite Membranes for Direct Methanol Fuel Cell (직접 메탄올 연료전지를 위한 술폰화 폴리스티렌/테플론 복합막 제조 및 특성연구)

  • 김정훈;신정필;박인준;이수복;서동학
    • Membrane Journal
    • /
    • v.14 no.2
    • /
    • pp.173-184
    • /
    • 2004
  • For the application of direct methanol fuel cell (DMFC), sulfonated polystyrene/teflon (PS/PTFE) composite membranes were developed by changing monomer ratio of styrene and DVB. The composite membranes were prepared as follows: first, the monomer mixtures consisting of styrene, divinyl benzene and AIBN were impregnated in porous PTFE film and then, polymerized under 8$0^{\circ}C$ to give PS/PTFE membranes. Finally, the membranes were reacted with chlorosulfonic acid in 1,2-dichloroethane to give the sulfonated composite membranes. The measurements of ATR-FTIR, SEM, solvent uptake test and ion exchange capacity (IEC) were done for the resulting membranes before or after sulfonation, respectively, which showed the composite membranes with proper crosslinking degree and sulfonic acid content were prepared well as a function of styrene/DVB ratio. ion conductivity and methanol permeability were studied for the sulfonated membranes. It was found that with decreasing the ratio of styrene/DVB, methanol permeability decreased from $6.6{\times}10^{-7}∼1.3{\timas}10^{-7}$ $\textrm{cm}^2$/s, which are much lower values than that of Nafion$^{(R)}$117($1.02{\times}10^{-6}$ $\textrm{cm}^2$/s). Under the same monomer condition, ion conductivity decreased from 0.11 S/cm ($25^{\circ}C$) to 0.08 S/cm ($25^{\circ}C$), which are similar or a little higher values compared with $Nafion^{(R)}117 (1.02{\times}10^{-6}$ $\textrm{cm}^2$/s, 0.0824 S/cm). These two results confirmed the composite membranes prepared could be applied successfully to DMFC.C.

Application of CFD Simulation to Cooling System Design of Agricultural Products Processing Center Workplace (농산물산지유통센터 작업장의 냉방 설계를 위한 CFD 시뮬레이션 적용)

  • Kwon, Jin-Kyung;Lee, Sung-Hyun;Moon, Jong-Pil;Lee, Su-Jang;Kim, Keyong-Won
    • Journal of Bio-Environment Control
    • /
    • v.19 no.4
    • /
    • pp.195-202
    • /
    • 2010
  • Cooling air-conditioning of APC (Agricultural Products processing Center) workplace is important to improve the working environment in the summer season. As existing cooling systems for air-conditioning of whole workplace are inefficient because of their high equipment operating costs, relatively inexpensive cooling system is required. The objectives of this study were to simulate the thermal flow fields in APC workplace having the positive and negative pressure type fan and pad systems and spot cooling system by using CFD software (FLUENT, 6.2) and estimate the cooling effectiveness of respective cooling systems. The results showed that the negative pressure type fan and pad system was inappropriate for the present APC workplace because of excessive outside air influx from open gateway and the positive pressure type fan and pad system created relatively low temperature field but non-uniform velocity field at worker positions. The spot cooling system could supply cool air to worker positions with relatively constant air velocity and temperature.

Research on the Development of the Oriental Medical Model on the Health Examination in the Industry (산업장 건강검진의 한의학적 모델 개발 연구)

  • Chong M.S.;Kim S.C.;Lee E.K.;Chun E.J.;Han J.M.;Lee S.K.;Kang S.H.;Yu T.S.;Jeung J.Y.;Song Y.S.;Lee K.N.
    • Journal of Society of Preventive Korean Medicine
    • /
    • v.4 no.1
    • /
    • pp.32-50
    • /
    • 2000
  • On the process of research in the plan on oriental medical participation in the industrial health sponsored by BK21 project, we carried out the oriental medical health examination program for workers during former half-year We reached the conclusion as follows, 1. The oriental medical health examination program is contents and formalities that should be determined by present industrial health system, based on the oriental medical system and scholastic character, and included probability of the western and oriental medical cooperation. 2. The oriental medical health examination program can promote capability of individual health management and productive power of workers, and it is capable to manage on the self-conscious symptoms and macroschophically approach to their environment 3. The oriental medical health examination program that we have developed, is flow as questionare, understanding of working environment, information of result and later management. It is composed of three fields as follow , first, use of pulse diagnostic apparatus, understanding of the health promotion life style, and diagnosis of the oriental medical doctor, second, analysis of constitution, third, photographing for understanding of the musculoskeletal disorders, questionare for musculoskeletal self-conscious symptoms, and diagnosis of oriental medical doctor. 4. The oriental medical health examination program that we have developed, progressive from the view point of health, makes the oriental medical doctor's roll more important. It is the first trial at the western and oriental medical cooperation and characterized by excellence about musouloskeletal disorders. But it need to be improved in aspects of time and specialist on the health examination, diagnostic apparatus, control of examinant and later management. So we think that it needs research on the employment of health examination specialist, establishment of later management system, development of significantly diagnosable standard and assessable form on the health examination, and contents of health examination on the western and oriental medical cooperation.

  • PDF

Reinforcement Method of a Long Span Plastic Greenhouse using Tension-tie (인장타이를 이용한 광폭형 비닐하우스의 보강법)

  • Shin, Kyung-Jae;Shin, Dong-Hui;Lee, Swoo-Heon;Chae, Seoung-Hun
    • Journal of Korean Society of Steel Construction
    • /
    • v.23 no.1
    • /
    • pp.41-49
    • /
    • 2011
  • A long-span (more than 8m) plastic greenhouse is currently being used in farms due to its magnified benefits, such as the convenience of the farming equipment used, and the land usage efficiency. In this study, the reinforcing effects of the use of a pretension tie were shown. In a previous study, tests for a 6.5m single-span-type greenhouse announced by Rural Development Administration were carried out. The tests of symmetric and eccentrics now loading by the sun and wind were conducted for the 10.2m span with a ${\phi}48.1{\times}2.1$ section in this study, after which the load-deflection relationship was compared for the cases of reinforcement with a tie and without a tie. The results of the symmetric snow loading test showed that the strength increased by 68~93% in the case of the specimen with a tied arch. The failure mode of the specimen without a tie tended to be that with a sway failure mechanism, and that of the reinforcement specimens with a tie tended to be that with an arch buckling mechanism. The results of the eccentric snow loading test showed that the strength of the specimen with a tie increased by 10~20% compared to that of the specimen without a tie. For the failure mode of the latter, a combined failure mechanism was adapted, although the failure mode of the tied specimens tended to be that with an arch buckling mechanism.

침치료에 대한 환자진료 평가 프로그램-독일 보험회사들의 침효과에 대한 검증-

  • Melchart, Dieter
    • Journal of Pharmacopuncture
    • /
    • v.6 no.1
    • /
    • pp.33-34
    • /
    • 2003
  • 배경: 독일 의사와 보험회사 위원회 (The German Board of Physicians and Insurance Companies:Bundesausschuss der Arzte und Krankenkassen)가 앞으로 일부 적응증에 대한 침치료에 대해 공적 보험회사가 보험료를 지급해야 할 지에 대한 추가 결정을 하기 위해 침의 효과를 평가하기로 했다. 목적: 1) 침치료가 편두통의 예방, 긴장성 두통, 요통, 무릎과 고관절의 골관절염치료에 대조군 침치료보다 효과가 있는지 검증 2) 침치료가 편두통의 예방적 치료에 표준 약물 치료와 비슷하게 효과가 있는지 검증 3) 보건의료 서비스체계 안에서 주어진 조건에 대한 일상적 침치료의 질적인 부분을 서술하고, 안전성을 평가하며, 다른 침술학파간의 임상결과의 차이와 비용의 효용적 활용부분을 평가한다. 4) 위의 적응증에 해당하는 모든 임상실험연구를 찾아내어 기존의 고찰내용을 갱신한다. 방법: 1) 무작위 표본추출 임상 실험, 침치료, 거짓침 치료, 대기자 명단 대조군, 출발시점 4주, 28주 관찰 2) 무작위 표본추출 임상 실험, 침치료, 표준약물치료 대조군, 츨발시점 4주, 28주 관찰 3) 전향적 다중 의료기관 관찰 연구, 두 가지 다른 자료를 활용하여서, 치료 결과를 침 시술자에 의한 모든 환자 평가 자료와, 열 두 명의 환자 가운데 한 명의 환자로부터 직접 받은 평가 자료 (관찰 출발시점, 치료 출발 시점, 치료 시작 후 6 개월) 실험공간: 1) and 2) 높은 수준의 수련을 한 침 시술 의사가 시술하는 병원이나 일차 진료기관의 외래. 3) 보건 의료 서비스내 저급의 침 시술 의사 (140 시간 수강, 학점 이수 필수) 참가자: 1) $4{\times}320$ 편두통의 예방, 긴장성 두통, 요통, 무릎과 고관절의 골관절염 환자 2) 480 편두통 환자(긴장성 두통 환자 추가적) 3) 약 500,000 환자, 2년 반 동안: 대략 한 적응증 당 10,000 환자 치료법: 모든 침치료 자리는 체침만 허용함. 1) 진짜 침은 학파의 지침에 따른 심자, 거짓 침은 비특이적 자리의 표피만 찌르는 자침 (12-15회, 8주): 대기자 대조군은 12주 동안에 아무 치료도 받지 않는다. 2) Group 1(N=240): 최대 15회 치료, 12주 동안: Group II (N=240) 투약 Proponolol (80-240mg), Metoprolol (100-200mg) or Flunarizin (5-10mg) 하루, 16주 이상 3) 치료회수와 침자리의 선정은 참가자가 결정 주된 임상 결과 지표: 1) 군 간의 치료 전 및 치료 진행 도중 4주 마다의 두통을 느낀 날 수의 차이 (평균 혹은 이상의 편두통이나 긴장성 두통) 2) 요통환자 군간의 기능을 측정하는 FFbH-R (Funktionsfragebogen Hannover) 비교 3) 관절염 환자의 군간 WOMAC 지표 비교 4) 군 간의 24주 동안 두통을 느낀 날 수의 차이(평균 혹은 이상의 편두통이나 긴장성 두통) 5) 적응증, 부작용, 성공율에 대한 거시적 평가, 사용한 침수, 환자의 만족도, SES(?). ADS(?) 통증 장애 지표(PDI), 삶의 질 지표(SF36). 예비 결과 위의 결과가 큰 관찰 연구에 초점을 맞추면서 소개될 것임.

Studies on the Complexes of Lanthanide ion with Multidentate Ligand (I). Determination of Thermodynamic Parameters with Solution Calorimetric Method in Nonaqueous Solvents (란탄족 원소의 여러자리 리간드 착물에 관한 연구 (제 1 보) 물아닌 용액에서 용액열량계에 의한 열역학적 함수결정)

  • Sam-Woo Kang;Won-Hae Koo;Soo-Min Lee;Chang Choo-Hwan;Moo-Yol Seo
    • Journal of the Korean Chemical Society
    • /
    • v.33 no.6
    • /
    • pp.588-595
    • /
    • 1989
  • Log K, ${\Delta}$H and ${\Delta}$S for the complexation of $La^{3+},\;Ce^{3+}$ and $Eu^{3+}$with various multidentate ligand containing crown ether, diaza crown ether and diamine ether have been determined in methanol and acetonitril solutions at $25^{\circ}C$ by solution calorimetric titration method. The greater stability constant of $La^{3+}$-15C5 than those of 18C6 diaza [2.2] in methanol are discussed in terms of the size of metal ion and the ligand cavity and of metal ion solvation. The stabilities of $Ce^{3+}$ and $La^{3+}$ ion complexes with a various multidentate ligand in acetonitril are in the order of (diamine ether)<18C6<15C5$Ce^{3+}$, $La^{3+}$ and $Eu^{3+}$-diaza [2.2] complexes in acetonitril are increased with the following order: $Eu^{3+}$ < $La^{3+}$ < $Ce^{3+}$, that is increasing order of the optimum size and of the charge density of metal ion.

  • PDF