• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.9-18
• /
• 1983

In many geological investigation, a data sequence may be created which consisted of a succession of mutually exclusive state. However, now our interest lie in the nature of transition from one state to another, rather than in the position of states in the sequence. In this paper, authors studied for the deformation of HAEUNDAE beach by transition matrices and empirical eigenfunction method. In this paper, 5-yr. set of profile data from HAEUNDAE beach measured at several monthly or yearly intervals are analyzed by using the transition matrices and empirical eigen-function. Results of this study indicate that the transition matrices and empirical eigenfunctions are useful in the analysis of beach profile data and provide objective insight in the nature of profile configuration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.344-349
• /
• 1995

셀구조물은 선박, 항공기, 우주선 등의 산업분야에 자주 사용되는 중요한 구조요소로서, 이에 대한 연구도 공학적 필요성에 의해 많은 연구가 진행되어 왔다. Maddox등의 Rayleigh-Ritz법, Srinivasan and Bobby의 적분방정식 기법, Petyt의 유한요소법, Irie, Henderson등의 전달매트릭스법, 그 외 Webster, Petyt and Deb Nath, Blevins, Srinivasan and Krishnan등에 의해 여러가지 해석방법의 진동해석이 행해져 왔다. 현재 주로 사용되고 있는 매트릭스 구조해석 및 진동해석 방법으로는 유한요소법과 전달매트릭스법을 들 수 있다. 유한요소법은 범용적인 해석 프로그램의 개발은 수월하지만 대규모의 선형 연립방정식의 해법에 귀착되므로, 기억용량이 큰 대형컴퓨터가 필요하고, 반면 전달매트릭스법은 기억용량이 적은 퍼스널컴퓨터로도 계산수행이 가능하나 고차의 고유진동수를 구할 경우나, 중간에 단단한 경탄성지지가 존재할 경우 등에는 수치계산상의 문제점이 지적되고 있다. 이에 대한 대책으로, 상태변수를 바꾸어 넣은 Riccati방법, 각 절점의 기지의 상태변수를 제거하는 Frontal법, 전달매트릭스와 강성매트릭스를 결합시키는 방법 등이 보고 되고 있다. 이에 자자들은 퍼스널컴퓨터 이용에 적합한 고속, 고정도의 구조해석 및 진동해석 기법으로 전달영향계수법을 제안하여, 원판구조물, 사각판구조물, 원통형 셀구조물 등의 여러가지 형상구조물의 자유진동 해석에 적용해서, 종래의 전달매트릭스법에 비해 계산정도 및 계산속도의 양면에서 매우 우수함을 보고한바 있다. 본 연구에서는 동적영향계수의 축차전달에 그 개념을 두고 있는 전달영향계수법을 좀 더 일반화시키고 체계화시키기 위하여 탄성지지를 갖는 셀구조물에 적용하여 자유진동 해석 알고리즘을 정식화한 후, 간단한 모델에 대한 수치실험을 통해서 전달 영향계수법으로 구한 해를 전달매트릭스법의 결과와 비교.검토하여 본 방법의 유용성을 확인하였다.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.231-242
• /
• 1999

This paper presents a numerical study on the flat plates in deep basements, subjected to out-of-plane floor load and in-plane compressive load due to soil and hydraulic lateral pressure. For nonlinear finite element analysis, a computer program addressing material and geometric nonlinearities is developed. The validity of the numerical model is established by comparison with existing experiments performed on plates simply supported on four edges. The flat plates to be studied are designed according to the Direct Design Method in Korean Building Code for Structural Concrete. Through numerical study on the effects of different load combinations and loading sequence, the load condition that governs the strength of the flat plates is determined. For the plates under the governing load condition, parametric studies are performed to investigate variations of the strength with reinforcement ratio, aspect ratio, concrete strength, and slenderness ratio. Based on the numerical results, the floor load magnification factor is proposed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.87-95
• /
• 2008

Ladar (Laser Detection And Ranging, Lidar) is a sensor to acquire precise distances to the surfaces of target region using laser signals, which can be suitably applied to ATD (Automatic Target Detection) for guided missiles or aerial vehicles recently. It provides a range image in which each measured distance is expressed as the brightness of the corresponding pixel. Since the precise 3D models can be generated from the Ladar range image, more robust identification and recognition of the targets can be possible. If we simulate the data of Ladar sensor, we can efficiently use this simulator to design and develop Ladar sensors and systems and to develop the data processing algorithm. The purposes of this study are thus to simulate the signals of a Ladar sensor based on linear frequency modulation and to create range images from the simulated Ladar signals. We first simulated the laser signals of a Ladar using FM chirp modulator and then computed the distances from the sensor to a target using the FFT process of the simulated signals. Finally, we created the range image using the distances set.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.43-47
• /
• 1985

This paper describes fiber-optic current sensor using SF-4 flint glass for the first time, ails the flint glass has been theoretically analyzed by jones matrix and experimentally verified. Verdet constant of SF-4 flint glass, which determines the sensitivity of current sensor, has been experimentally found as 0.0606(min/g.cm). It is relatively lower value than currently used faraday rotators such as FR-5, SF-6 flint glasses and YIG. The fiber.optic current sensor system was established and the current measurement was performed in the range of 100-600 (A) and 100- 500 (G). It has beenfhown by the experi-mental results that the detector output linearly increased in proportion to the current. Since these experimental results were in good agreement with theoretical results, it has been shown that SF-4 flint glass can be used for the magnetooptic current sensor.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.210-216
• /
• 2005

We Propose a new feature normalization scheme based on eigenspace for achieving robust speech recognition. In general, mean and variance normalization (MVN) is Performed in cepstral domain. However, another MVN approach using eigenspace was recently introduced. in that the eigenspace normalization Procedure Performs normalization in a single eigenspace. This Procedure consists of linear PCA matrix feature transformation followed by mean and variance normalization of the transformed cepstral feature. In this method. 39 dimensional feature distribution is represented using only a single eigenspace. However it is observed to be insufficient to represent all data distribution using only a sin91e eigenvector. For more specific representation. we apply unique na independent eigenspaces to cepstra, delta and delta-delta cepstra respectively in this Paper. We also normalize training data in eigenspace and get the model from the normalized training data. Finally. a feature space rotation procedure is introduced to reduce the mismatch of training and test data distribution in noisy condition. As a result, we obtained a substantial recognition improvement over the basic eigenspace normalization.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.661-674
• /
• 2002

The objective of this study is to develop efficient numerical method to enable solution of optimal control problems of Navier-Stokes flows and to apply these technique to the problem of viscous drag minimization on a bluff body by controlling boundary velocities on the surface of the body. In addition to the industrial importance of the drag reduction problem, it serves as a model for other more complex flow optimization settings, and allows us to study, modify, and improve the behavior of the optimal control methods proposed here. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. This study shows how reduced Hessian successive quadratic programming method, which avoid converging the flow equations at each iteration, can be tailored to these problems.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.305-308
• /
• 2008

The purpose of this study is to propose the confinement effectiveness of precast segmental concrete that binding by lateral confining steel in the method of precast segmental concrete pridge piers construction. Generally, the confinement effect of concrete that binding by lateral confining steel is defined by the confinement effectiveness coefficient and the confinement effectiveness coefficient is defined as the ratio of area of effectively confined concrete core to area of confined concrete core. The area of effectively confined concrete core is defined by Arching action occurred on a space of lateral confinement steel and The area of confined concrete core is defined by the ratio of area of longitudinal reinforcement to area of core of section. But in case of precast segmental concrete, concrete cover that exist on top and bottom of concrete segment should be considered.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.247-257
• /
• 2001

New methods are proposed for printing a full resolution image on a limited output device. The proposed algorithm uses a dot-pattern database that models overlapping phenomena among neighbor printing dots. To solve the problem of dot-overlap, the gray levels of dot-pattern sets were calculated using a circular dot-overlap model and then measured by a spectrometer. Thereafter, in order to improve the visual quality of the color dithering, the contrast sensitivity function of the human visual system was used. As a result, the optimal dot-pattern can be selected from the database. Consequently, the proposed algorithm can produce high quality images while using low-cost color devices.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1185-1193
• /
• 1999

최적 스택 필터는 시그널 또는 영상의 임의의 특성 정보를 보존하고자 하는 요구조건에 의해 강제된 구조적 제약 하에서 최대의 잡음제거 효과를 얻을 수 있다. 그리고 임계치 분할 특성과 양의 부울 함수에 기반한 이진 영역에서의 처리 특성은 이 필터가 높은 병렬성을 갖고 있음을 보여준다. 본 논문에서는 두 개의 병렬 계산 모델 MCC(Mesh-Connected Computer)와 CCC(Cube-Connected Computer)에서 최적 스택 필터를 위한 1차원 병렬 알고리즘을 개발한다. 최적 스택 필터의 실행 시간은 주로 이진 median 연산에 의해 결정되고 본 논문에서 제안된 알고리즘은 선형 분리성에 의해 이 연산을 구현한다. 이를 바탕으로, M 레벨의 1-D 시그널의 길이가 L이고 윈도우 폭이 N이라고 가정할 때, 제안된 알고리즘은 {{{{root M times root M`` MCC에서 O(L sqrt{M}`) 시간에 그리고 M 개의 PE를 갖는 CCC에서 O(L log M)시간에 수행될 수 있다. 또한 잡음을 더욱 효과적으로 제거하기 위해 윈도우 폭 N을 증가시킬 때, 제안된 병렬 알고리즘의 계산 시간은 일정하게 유지됨을 보인다.Abstract An optimal stack filter achieves the maximum noise attenuation under the structural constraints imposed by the requirement of preserving certain signal or image features. And the filter provides a high parallelism due to the principles of threshold decomposition and binary processing based on positive Boolean functions(PBFs). In this paper, we develop an one-dimensional parallel algorithm for the optimal stack filter on two parallel computation models, MCC(Mesh-Connected Computer) and CCC(Cube-Connected Computer). The running time of the optimal stack filter depends mainly on the binary median operation and our algorithm realizes this operation by the linear separability. Based on this scheme, our parallel algorithm can be performed in {{{{O(L sqrt{M}`) MCC and inO(L log M) time on CCC with M PEs, when the length of M``-valued 1-D signal is L`` and window width is N`` Also, we show that the computation time of our parallel algorithm keeps constant when the window width N increases in order to achieve the best noise attenuation.