• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3304-3311
• /
• 2014

In the saponification to manufacture plant fatty acid hard soap, the drying process is required for its water evaporation and hardness. This study mixed it with essential oil(E.O) with high volatility instead of adding synthetic flavor. And it comparatively observed the duration of flavor changing to the additive ($TiO_2$) and the drying period of the major flavor component (Linalool, Linalyl acetate) in the essential oil (Lavender E.O) contained in the soap during the soap manufacture by using GC-MS. Advanced researches have mostly dealt with the utility of plant hard soap, and those related with the volatility of flavor have been hardly conducted. Regarding the volatility of linalool contained in the soap, the soap mixed with $TiO_2$ showed a higher reduction ratio up to the 12th week; however, at the point of the 20th week, it reduced to a similar level. Although Linalyl acetate did indicate a slight difference according to the mixture of $TiO_2$, the volatility was shown similar up to the point of the 20th week. During the 20 weeks of drying, the residual rate of linalool was found to be higher than that of Linalyl acetate regardless of the mixture of $TiO_2$. It has been found that the flavor component of lavender essential oil with the duration of two or so days at the room temperature remains for 20 weeks (or 5 months) when it is manufactured through the mixture of plant fatty acid hard soap.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.379-384
• /
• 2012

It is investigated that that the physical properties of Glutathione layer formed on gold surfaces may make an effect on the distribution of either gold particle adsorbed to the $TiO_2$ surface or vice versa with the adjustment of the electrostatic interactions. For the investigation, the atomic force microscope (AFM) was used to measure the surface forces between the surfaces as a function of the salt concentration and pH value. With the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, the forces were quantitatively analyzed to acquire the surface potential and charge density of the surfaces for each salt concentration and each pH value. The surface potential and charge density dependence on the salt concentration was described with the law of mass action, and the pH dependence was explained with the ionizable groups on the surface. The salt concentration dependence of the surface properties, found from the measurement at pH 8 and 11, was consistent with the prediction from the law. It was found that the Glutathione layer had higher values for the surface charge densities and potentials than the titanium dioxide surfaces at pH 8 and 11, which may be attributed to the ionized-functional-groups of the Glutathione layer.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.167.1-167
• /
• 2003

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.461-468
• /
• 2017

This study measured and compared the protective clothing using Pb used for shielding in a diagnostic X-ray energy range, and the shielding rates of X-ray fusion shielding materials using Si and $TiO_2$. For the experiment, a pad type shielding with a thickness of 1 mm was prepared by mixing $Si-TiO_2$, and the X-ray shielding rate was compared with 0.5 mmPb plate of The shielding rate of shielding of 0.5 mmPb plate 95.92%, 85.26 % based on the case of no shielding under each 60 kVp, 100 kVp tube voltage condition. When the shielding of $Si-TiO_2$ pad was applied, the shielding rate equal to or greater than 0.5 mmPb plate was obtained at a thickness of 11 mm or more, and the shielding rate of 100% or more was confirmed at a thickness of 13 mm in 60 kVp condition. When the shielding of $Si-TiO_2$ pad was applied, the shielding rate equal to or greater than 0.5 mmPb plate was obtained at a thickness of 17 mm or more, and a shielding rate of 0.5 mmPb plate was observed at a thickness of 23 mm in 100 kVp condition. Through the results of this study, We could confirm the possibility of manufacturing radiation protective materials that does not contain lead hazard using various metalic compound and liquid Si. This study shows that possibility of liquid Si and other metalic compound can harmonize easily. Beside, It is flexible and strong to physical stress than Pb obtained radiation protective closthes. But additional studies are needed to increase the shielding rate and reduce the weight.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.329-334
• /
• 2009

Yttrium ions doped $TiO_2$ particles have been prepared using a low temperature combustion method. The physical properties were investigated, together with the activity of $TiO_2$ particles as a photocatalyst for the decomposition of methylene blue. From XRD results, the major phase of all the $TiO_2$ particles prepared under basic condition was an anatase structure but a rutile peak was observed when they are prepared under acidic condition. The crystallite size of $TiO_2$ particles was decreased as the molar ratio of CA/TTIP increased. The photocatalytic activity increased with an increase of CA/TTIP molar ratio and pH in the solution. In addition, the doping of 1.0 mole% yttrium ion on the $TiO_2$ enhanced the photocatalytic activity and showed the higher activity than commercial P-25 catalyst.

• Applied Microscopy
• /
• v.42 no.2
• /
• pp.87-93
• /
• 2012

In this study, fine structures of silica, titanium dioxide, talc and kaolin used in decorative cosmetics and the mixture extracted from BB cream cosmetics were observed by scanning electron microscopy. Kaolin had plate like shape structures of polygon with smooth surface and edge of kaolin had a relatively smooth appearance in comparison with talc. Also, thickness of each layer was estimated to about $0.1{\mu}M$ in the lump formed in stratum of several layers. Talc was observed by lumps shape phase of layering very thin flake. Boundary of thin flake was sharp or angular phase and thickness of flake was approximately 600 nm in diameter. When comparing the thickness of kaolin and talc, we was confirmed that kaolin was thicker than talc. Diameter of titanium dioxide was estimated to 0.2~0.3 ${\mu}M$ and surface of particle was a soft cubic form. Silica was confirmed that variety of size from 200 nm to $15{\mu}M$ of globular shape was measured. From the observation of inorganic pigments, silica was homogeneous dispersed in the BB cream cosmetics and among each other was filled with relatively small size like talc, kaolin, titanium dioxide and iron oxide. In conclusion, we suggest that silica at decorative cosmetics were formed in cosmetic coat at the skin as the minimum thickness.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.70-76
• /
• 2016

The objective of this study was to fabricate hydroxyapatite (HA) containing titania layer by HA blasting and anodization method to obtain advantages of both methods and evaluated biocompatibility. To fabricate the HA containing titania layer on titanium, HA blasting treatment was performed followed by microarc oxidation (MAO) using the electrolyte solution of 0.04 M ${\beta}$-glycerol phosphate disodium salt n-hydrate and 0.4 M calcium acetate n-hydrate on the condition of various applied voltages (100, 150, 200, 250 V) for 3 minutes. The experimental group was divided according to the surface treatment procedure: SM (simple machined polishing treatment), HA, MAO, HA+MAO 100, HA+MAO 150, HA+MAO 200, HA+MAO 250. The wettability of surface was observed by contact angle measurement. Biocompatibility was evaluated by cell adhesion, and cell differentiation including alkaline phosphatase activity and calcium concentration with MC3T3-E1 cells. The porous titanium oxide containing HA was formed at 150 and 200 V. These surfaces had a more hydrophilic characteristic. Biocompatibility was demonstrated that HA titania composite layer on titanium showed enhanced cell adhesion, and cell differentiation. Therefore, these results suggested that HA containing titania layer on titanium was improved biological properties that could be applied as material for dental implant system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.245-245
• /
• 2007

• Fiber Technology and Industry
• /
• v.8 no.2
• /
• pp.120-127
• /
• 2004

광촉매(photocatalyst)는 빛에 의하여 작용하는 촉매 물질로서 항균, 방취, 유기물 분해, 수질 및 대기개선 등의 환경분야와 물 분해에 의한 청정 에너지생성 등의 다양한 분야에서 많은 주목을 받고 있으며, 이미 기본적인 특성에 대한 많은 연구가 수행되었다［l-3］. 광촉매와 섬유의 연계연구는 기존의 연구를 통해 밝혀낸 광촉매의 많은 유용한 특성들을 섬유에 도입하거나, 기존의 연구의 한계점을 섬유의 고유의 특성을 이용하여 극복하여 광촉매 고유의 특성을 극대화하는 방향으로 연구가 수행되고 있다. 본고에서는 가장 널리 이용되고 있는 이산화티탄(titanium dioxide, TiO$_2$) 광촉매의 기본특성을 이해하고, 광촉매의 특성을 접목한 광촉매ㆍ섬유제품의 현재까지의 연구동향을 알아봄으로써, 섬유분야의 많은 지식을 가지고 있는 독자들에게 새로운 섬유제품 개발의 아이디어의 기회를 제시하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.182-182
• /
• 2009

실란, 실리카, 이산화티탄($TiO_2$) 광촉매의 sol-gel 반응을 통하여 자기세정 기능과 Cr-free 기능을 동시에 나타낼수 있는 친수성 자기세정 강판용 공중합체를 제조하여용융 아연 도금 강판위에박막으로 코팅하여 그 특성을 분석하였다. 코팅층의 상부에 위치한 TI층에 의하여 광활성화를 통한 친수성표면을 형성하였으며, 코팅표면에서의 수(水) 접촉각 측정결과 10도 이하의 초친수성 특성을 나타내었다.