• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.270-279
• /
• 2005

It is important to understand and evaluate the environmental impacts of rice cultivation for developing environmentally-friendly agriculture because rice is main crop in Korea and rice cultivation have both functions of water pollution and purification with environmental and cultivation conditions. This paper presents the evaluation of nitrogen impact by rice cultivation on water system. A simple protocol was proposed to assess the potential amount of nitrogen outflow from paddy field and most of parameters affect on the nitrogen outflow from paddy field such as the amount of fertilizer application, water balance, the quality and quantity of irrigation water, soil properties, nitrogen turnover in the soil and cultivation method were considered. To develop the protocol, coefficients for parameters affected nitrogen turnover and outflow were gotten and summarized by comparison and analysis of all possible references related, and by additional experiments at field and laboratory. And potential amount of nitrogen input and output by water in paddy field were estimated with the protocol at the conditions of the nitrogen contents of irrigation water, amount of fertilizer application, and irrigation methods. Where irrigation water was clean, below 1.0 mg $L^{-1}$ of nitrogen concentration, rice cultivation polluted nearby watershed. At the conditions of 2.0 mg $L^{-1}$ of nitrogen concentration, 110 kg $ha^{-1}$ of nitrogen fertilizer application and flooding irrigation, rice cultivation had water pollution function, but it had water purification function with intermittent irrigation. At the conditions of 3.0 mg $L^{-1}$ of nitrogen concentration and 110 kg $ha^{-1}$ of nitrogen fertilizer application, rice cultivation had water purification function, but that had water pollution function with 120 kg $ha^{-1}$ of nitrogen application. Where irrigation water was polluted over 6.0 mg $L^{-1}$ of nitrogen, it was evaluated that rice cultivation had water purifying effect, even though the amount of nitrogen application was 120 kg $ha^{-1}$.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.481-488
• /
• 1999

Background: The routine application of the combined regimen of corticosteroid-antituberculosis therapy to the tuberculous pleurisy remains controversial. Steroid therapy to tuberculous pleurisy could be effective on the acceleration of absorption of pleural effusion and symptom improvement, but there has been debate about the effect of prednisolone on the prevention of pleural adhesion. So we studied the efficacy of combined regimen of prednisolone-antituberculosis therapy on the absorption of pleural effusion and prevention of pleural adhesion. Method: A prospective, randomized study was performed in 82 patients, 50 patients(non-steroid group) were treated with only antituberculosis regimen for 6 months and in 32 patients(steroid group) prednisolone(30mg/day) were administered in addition to antituberculosis regimen for one months and tapered for another month. The amount of pleural effusion was compared at the beginning of treatment, 2nd month, 6th month and final visit with chest X-ray findings which were graded from grade 0(complete absorption) to grade 6(near total haziness). Results: The amount of pleural effusion of steroid group at 2nd month, 6th month and final visit was lesser than that of non-steroid group(P<0.05). The incidence of the complete absorption of the pleural effusion was 3/32(9.4%) in steroid group, 1/50(2%) in non-steroid group at 2nd month after treatment; and 12/32(37.5%) in steroid group, 6/50(12%) in non-steroid group at 6th month after treatment(P<0.05). At final observation, the incidence of residual pleural thickening was 15/32(47%) in steroid group and 37/50(74%) in non-steroid group(P<0.05). No serious side effects were noted during the treatment with prednisolone. Conclusion: The administration of prednisolone in conjunction with antituberculosis chemotherapy improved the absorption of pleural effusion and decreased the residual pleural thickening.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.834-841
• /
• 2004

The purpose of this study is to investigate the properties of traditional Korean ash glazes by using locally available sources; 10 kinds of grain stems,2 kinds of husks (pod, chaff), and 4 kinds of vegetables (spinach, radish leaf and stem, pumpkin leaf and stem, pepper stem), and to develop their practical uses as ash glazes. The test results of these ash glazes indicate that these ashes can be classified into four categories. The first group, which includes perilla stem ash, sesame stem ash, black bean stem ash and red-bean stem ash, shows strong milky white due to relatively lower content of $SiO_2$, and relatively higher content of CaO and P$_2$O$\_$5/ content (10% higher than others), and their glazes were found to be suitable for opaque glaze as they show relatively stable bright greenish color. The second group includes pepper stem ash, spinach ash, pod ash, radish leaf and stem ash, and bean stem ash, and this group was found to contain even quantity of every component. And their glaze show somewhat greenish color because of especially high content of MgO and more than 2% of Fe$_2$ $O_3$. They were found to be suitable for basic glaze of IRABO glaze. The third group, which includes com stalk ash, white bean ash, pumpkin leaf and stem ash, has more $SiO_2$ and Al$_2$ $O_3$ than other ashes, and it also contains 3～5% of Fe$_2$ $O_3$. As a result of those components, this third group shows the greatest change of color and chroma, and was found to be suitable glazes as basic glaze of Temmoku and black glazes. The fourth group (reed ash, rice straw ash, indian millet stalk ash and chaff ash) has as much as 45～82% of $SiO_2$ and relatively lower content of Fe$_2$ $O_3$ and P$_2$ $O_3$. This group shows blue or greenish white color, and was found to be suitable as the basic glaze of white glaze.

• Membrane Journal
• /
• v.6 no.3
• /
• pp.157-165
• /
• 1996

Polysulfone(PS) membranes were prepared from homogeneous PS solutions by the phase inversion technique. When propionic acid(PA) was added into a casting solution of n-methylpyrrolidone(NMP) and PS, precipitation rate of the solution film was accelerated. This kind of acceleration was consistent, even though a precipitating nonsolvent was changed from water to isopropanol. These phenomena were caused by decrease of nonsolvent tolerance in the casting solution due to addition of PA. PS powder was prepared by precipitation of a 3wt% solution in dimethylformamide(DMF) using ethanol as nonsolvent. Gas adsorption analysis of the powder showed that the capillary condensation sites were found in the powder structure. Membranes prepared from PS solution(15wt%) in NMP had the following characteristics of gas adsorption and water permeation. In gas adsorption analysis, the membrane precipitated using isopropanol showed low uptake of nitrogen gas and the capillary condensation sites were not found. On the contrary, a significant amount of the capillary condensation sites was found in the membrane coagulated by water, which was related to increase of nitrogen uptake. tn the membrane prepared froin the solution including PA, an increase of the Henry's law sites and the Langmuir sites was not found clearly. However, the capillary condensation sites were significantly increased, and the water transport also increased.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.293-309
• /
• 2014

The Qinling-Dabie-Sulu-Hongseong-Odesan collision belt was formed by the collision between the North China and South China Cratons during late Permian to Triassic. During the collision, Triassic post-collision igneous rocks regionally intruded in the Qinling and the Hongseong-Odesan collision belts which represent the western and eastern ends of the collision belt, respectively. However, no and minor Triassic post-collision igneous activities occur in the Dabie and Sulu belts respectively. The peak metamorphic pressure conditions along the Qinling-Dabie-Sulu-Hongseong-Odesan belt indicate that the slab break-off occurred at the depth of ultra-high pressure (UHP) metamorphic condition in the Dabie and Sulu belts and at the depths of high pressure (HP) or high pressure granulite (HPG) metamorphic condition in the Qinling and Hongseong-Odesan belts. In the Dabie and Sulu belts the heat supply from the asthenospheric mantle through the gab formed by slab break-off could not cause an extensive melting in the lower continental crust and lithospheric mantle directly below it due to the very deep depth of slab break-off. On the other hand, in the Qinling and Hongseong-Odesan belts, shallower slab break-off caused the emplacement of regional post collision igneous rocks. The post-collision igneous rocks occur in the area to the north of the Mianlu Suture zone in the western Qinling belt and crop out continuously eastwards into the areas to the north of the Shangdan Suture zone in the eastern Qinling belt through the areas within the South Qinling block. This distribution pattern of post collision igneous rocks suggests that the Triassic collision belt in the Mianleu Suture zone may be extended into the Shangdan Suture zone after passing through the South Qinling block instead into the boundary between the South Qinling block and the South China Craton.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.257-264
• /
• 2006

This study investigated the effects of hybrid process(chemical coagulation, Fenton oxidation and ceramic UF(ultrafiltration)) on COD and color removals of commercial reactive dyestuffs. In the case of chemical coagulation, the optimal concentrations of $Fe^{3+}$ coagulant for COD and color removals of RB49(reactive blue 49) and RY84(reactive yellow 84) were determined according to the different coagulant dose at the optimal pH. They were 2.78 mM(pH 7) in RB49 and 1.85 mM(pH 6) in RY84, respectively. In the case of Fenton oxidation, the optimal concentrations of $Fe^{3+}\;and\;H_2O_2$ were obtained. Optimal $[Fe^{2+}]:[H_2O_2]$ molar ratio of COD and color removals of RB49 and RY84 were 4.41:5.73 mM and 1.15:0.81 mM, respectively. In the case of ceramic UF, the flux and rejection of supernatant after Fenton oxidation were investigated. After ceramic UF for 9 hr, the average flux of RB49 and RY84 solutions were $53.4L/m^2hr\;and\;67.4L/m^2hr$ at 1 bar, respectively. In addition, the permeate flux increased and the average flux recovery were 98.5-99.9%(RB49) and 91.0-97.3%(RY84) according to adopting off-line cleaning(5% $H_2SO_4$). Finally, COD and color removals were 91.6-95.7% and 99.8% by hybrid process, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.605-618
• /
• 1996

Namsan area supposed to be a disturbed ecosystem and Kwangneung area considered to be a natural ecosystem were selected for the study. On the basis of the plant species composition, the study was planned to examine structural plant species diversity so as to provide basic ecological information to restore more stable and healthy ecosystem for Namsan. The stratified sample plot method was employed for collecting vegetation data, establishing $20m{\times}20m$ square plots for overstory trees, $4m{\times}4m$ plots for mid-story woody plants, and $1m{\times}1m$ plots for ground vegetation. The herbaceous plants were periodically investigated by taking into account for seasonal(spring, summer, and autumn) variation in presence. Ecological attributes were evaluated through analyzing species composition, species diversity, life forms, interspecies association, and growing habitat for various forest types, vertical layers, life forms, and seasonal variation. Even though the species diversity index of canopy trees in the deciduous forest of Namsan was estimated higher than that of the natural forest of Kwangneung, overall species diversity of plants in Kwangneung area was greater than that in Namsan area. Herbaceous plants presented in Kwangneung but not in Namsan were Aconitum pseudo-proliferum, Botrychium virginianum, Dryopteris tokyoensis, Scutellaria insignis, Tricyrtis dilatata, and Viola kamibayashii, most of them were endemic species of Kwangneung. Elaeagnus umbellata, and Prunes padus var. seoulensis were found only in Namsan. Such species typically composed of the natural deciduous forest as Acer mono, Acer triflorum, Carpinus laxiflora, Cornus controversa, Fraxinus mandshurica, and Phellodendron amurertse were limited growing in a small size of area in Namsan. The future project should be made for encouraging the growth and expansion of the distribution of such species to restore biodiversity in Namsan area.

• Journal of the Korean Magnetics Society
• /
• v.19 no.3
• /
• pp.89-93
• /
• 2009

Amorphous $Ge_{1-x}Mn_x$ semiconductor thin films grown by low temperature vapor deposition were annealed, and their electrical and magnetic properties have been studied. The amorphous thin films were $1,000{\sim}5,000\;{\AA}$ thick. Amorphous $Ge_{1-x}Mn_x$ thin films were annealed at $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$ and $700^{\circ}C$ for 3 minutes in high vacuum chamber. X-ray diffraction analysis reveals that as-grown $Ge_{1-x}Mn_x$ semiconductor thin films are amorphous and are crystallized by annealing. Crystallization temperature of amorphous $Ge_{1-x}Mn_x$ semiconductor thin films varies with Mn concentration. Amorphous $Ge_{1-x}Mn_x$ thin films have p-type carriers and the carrier type is not changed during annealing, but the electrical resistivity increases with annealing temperature. Magnetization characteristics show that the as-grown amorphous $Ge_{1-x}Mn_x$ thin films are ferromagnetic and the Curie temperatures are around 130 K. Curie temperature and saturation magnetization of annealed $Ge_{1-x}Mn_x$ thin films increase with annealing temperature. Magnetization behavior and X-ray analysis implies that formation of ferromagnetic $Ge_3Mn_5$ phase causes the change of magnetic and electrical properties of annealed $Ge_{1-x}Mn_x$ thin films.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.202-211
• /
• 2016

This study evaluated the changes of phytoestrogen contents and antioxidant activities of soybean-powder milk (SPM) prepared from yellow soybean during fermentation with Lactobacillus plantarum P1201. In consequence, the levels of total phenolic and isoflavone-aglycone contents, ABTS and DPPH radical-scavenging activities, and FRAP assay values increased, while isoflavone-glycoside contents decreased during fermentation. The highest levels of daidzein, glycitein, and genistein were present in the Daepung SPM at concentrations of 177.92, 20.64, and $106.14{\mu}g/g$, respectively after 60 h of fermentation. Moreover, Daepung SPM showed the highest DPPH radical-scavenging activity of 48.54%, an ABTS radical-scavenging activity of 99.25%, and a FRAP assay value of 0.84 at the end of fermentation. The fermented Daepung SPM possessed highest isoflavone aglycone contents and antioxidant activities, which can be utilized for the development of functional foods.