• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.4
• /
• pp.165-173
• /
• 1998

Analytical solutions to predict the movement rate of submerged mound are derived using the convection coefficient and the joint distribution function of wave heights and periods. Assuming that the sediment is moved onshore due to the velocity asymmetry of Stokes' second order nonlinear wave theory, the micro-scale bedload transport equation is applied to the sediment conservation. The nonlinear convection-diffusion equation can then be obtained which governs the migration of submerged mound. The movement rate decreases exponentially with increasing the water depth, but the movement rate tends to increase as the spectral width parameter, $ u$ increases. In comparison of the analytical solution with the measured data, it is found that the analytical solution overestimates the movement rate. However, the agreement between the analytical solution and the measured data is encouraging since this over-estimation may be due to the inaccuracy of input data and the limitation of sediment transport model. In particular, the movement rates with respect to the water depth predicted by the analytical solution are in very good agreement with the estimated result using the discritization technique with the hindcast wave data.

• Journal of Korea Water Resources Association
• /
• v.43 no.6
• /
• pp.543-557
• /
• 2010

The effects of the selection for sediment transport equations and advection-diffusion equations according to different sediment transport modes on the modeling results of bed changes were analyzed using the CCHE2D and compared with field data in this paper. The most suitable sediment transport equation and sediment transport mode for advection-diffusion equation were suggested for the upstream approached channel of the Nakdong River Estuary Barrage. The bed changes simulated by the Engelund and Hansen formula were very small in the modeling case for the low and high flow discharges compared with the case of the Ackers and White formula. Also, the numerical modeling with the actual hydraulic event in 2002 presents that the bed change result with the bed load transport type for advection-diffusion equation was close to the field measurement more than the suspended load type.

• Journal of the Korean Society of Visualization
• /
• v.20 no.3
• /
• pp.74-85
• /
• 2022

We propose a Cubic-Interpolated Pseudo-Particle Lattice Boltzmann method (CIP-LBM) for the convection-diffusion equation (CDE) based on the Bhatnagar-Gross-Krook (BGK) scheme equation. The CIP-LBM relies on an accurate numerical lattice equilibrium particle distribution function on the advection term and the use of a splitting technique to solve the Lattice Boltzmann equation. Different schemes of lattice spaces such as D1Q3, D2Q5, and D2Q9 have been used for simulating a variety of problems described by the CDE. All simulations were carried out using the BGK model, although another LB scheme based on a collision term like two-relation time or multi-relaxation time can be easily applied. To show quantitative agreement, the results of the proposed model are compared with an analytical solution.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.13-26
• /
• 1995

In this paper three turbulence models including two-equation model by Blumberg and Mellor (1987), one-equation model with mixing length formula of Blackadar's (1962), and zero-equation model of Prandtl's (1925) were compared in homogeneous, unstratified channel flows. Steady flows which a steep-sided trapezoidal trench with uniform discharge, tidal flow and steady wind-driven flow in finite channels are considered in detail. Steady flows in a trench and tidal flows in a finite channel were reproduced fairly accurately and there was virtually no difference among results of three turbulence models. However, In case of steady wind-driven flow only two-equation model reproduced the important features of experimental data. the other two models underestimated the surface velocity. In tidal and wind-driven flows with negligibly small adjective and diffusive effects, the two-equation model gives rise to parabolic profile of eddy viscosity with maximum at the mid0depth, and the one and zero equation model based on Blackadar formula linear profile with maximum at the surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.129-138
• /
• 1993

In this study, the applicability of finite analytic method (FAM) is studied by selecting linearized-Burgers equation and Burgers equation which have convective and diffusive behaviors as the model equation of Navier-Stokes equations and by comparing numerical solution of finite difference method (FDM) and finite analytic method. The results are as follows. It is shown that the convergence of FAM for steady-state analytic solution of linearized-Burgers equation and Burgers equation is better than that of FDM under the same criteria. Also the accuracy of FAM for transient solution of Burgers equation is excellent. Especially, it is shown that oscillation phenomenon due to dispersion errors which occur according to the choice of grid size in FDM does not occur in FAM at all. So, it can be thought that FAM is numerically very stable scheme, which is free from dispersion errors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.859-871
• /
• 2014

In order to analyze the density current due to salt and temperature difference, this study develops new numerical model (LES-WASS-3D ver. 2.0) by introducing state equation for salt and temperature and 3D advection-diffusion equation to existing 3D numerical wave tank (LES-WASS-3D ver. 1.0). To verify the applicability, the newly-developed numerical model is analyzed comparing to the experimental result of existing numerical model. In the result, it well implement the behavior and vertical salt concentration of advected and diffused seawater as well as flow velocity and temperature of the discharged warm water. This confirms the validity and effectiveness of the developed numerical model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.07a
• /
• pp.73-80
• /
• 1993

• Journal of Soil and Groundwater Environment
• /
• v.13 no.4
• /
• pp.54-61
• /
• 2008

Permeable reactive barriers (PRBs) technology has been focused in contaminated groundwater remediation. It is necessary to select adequate reactive material according to characteristics of contaminant in groundwater. In this research, the reaction between reactive material and heavy metal contaminants was estimated through column test. Reactive material was slag, which has been produced in Gwangyang power plant, and heavy metal contaminants were cadmium, lead and copper. Column test was performed in the condition of 1) single and multi contaminated solution and 2) different initial concentration of cadmium. Retardation factor of cadmium is 3.94 in multi contamination. But that of copper is 40.3 in single and 25 in multi. The difference of retardation between cadmium and copper is due to affinity, resulted from the difference of electronegativity. In multi-contamination, copper effluent concentration was above initial copper concentration and at the same time lead effluent concentration was decreased. This phenomenon was considered that lead extract copper sorbed in slag and then lead was sorbed to the vacant sorption site instead. And as the initial concentration was increased, the retardation factor of cadmium became decreased.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.181-193
• /
• 2000

This paper presents the flow and the suspended sediment movement over ripples for oscillatory flows. A new numerical model system is developed, and applied to a laboratory experimental condition of regular waves and a fictitious condition of irregular waves. The flow field is obtained from a programme proposed by Kim et. al.(1994), which is a modified version of SOLA based on SMAC scheme. The sub-model solves the continuity and Reynolds momentum equations in the x-z plane. The wave orbital velocities, shear stresses, and pressure are all reasonably reproduced by the model. The model results on the vertical velocity component show good agreement with the measurements. The suspended sediment transport sub-model is newly set up to solve the advection-diffusion equation of suspended sediment using a split method, and involving a special shear entrainment from the whole ripple surface. The calculated suspended sediment concentrations for regular waves show reasonable agreement with measurements at Deltaflume. The model results for random waves show that the suspended sediment concentration is higher than those for regular waves and that the sediment diffuses higher than for regular waves with the significant wave height and the peak wave period of the irregular waves.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.3
• /
• pp.133-142
• /
• 2010

We calculated using siltation model to know the influnce of the tidal current, the tidal level, the sediment transport of seabed around sea area due to the construction of the Song do New city. We calculated the tidal current and based on this we estimated scour, sedimentation using the advection-diffusion equation and accessed the sediment transport of seabed before and after the construction of the New city. Sedimentation was increased in the east coast of Young jong Do, and Scour was increased according to the direction from the front route of north harbor to Ho do. Tidal level was increased overall.