• Defense and Technology
• /
• no.5 s.291
• /
• pp.30-41
• /
• 2003

최근 컴퓨터기술의 발전과 더불어 등장한 컴퓨터모델링기법을 이용하여 현재는 존재하지 않으나 합성에 의해 만들어낼수 있는 새로운 분자들을 예측할 수 있게되었다. 이러한 기술을 에너지물질의 설계에 적용하려는 시도가 1890년대부터 시작되어, 새로운 고밀도 고에너지물질 분자들이 이론적으로 존재 가능하다는 연구결과가 속속 보고되고 있다. 에너지물질 분자들의 주요 구성원소는 C, H, N, O 등인데, 이들 원자들로부터 에너지효율을 극대화하기 위하여 선진국을 위시한 세계 여러 나라의 이론화학자들이 양자역학 이론에 바탕을 둔 ab initio 계산이 주가 되는 분자모델링 기법을 이용하여 새로운 분자들의 존재가능성을 예측하려는 연구가 활발하게 이루어지고 있다. 이러한 새로운 고에너지 물질을 찾으려는 노력의 일환으로 순수한 질소 원자들로만 이루어진 분자들, 일명 질소클러스터(Nitrogen Clusters)에 대한 연구가 진행되고 있는데, N4에서 N60까지 다양한 개수의 질소원자로 이루어진 질소크러스터의 존재가능성이 이론적으로 확인되고 있고, $N5^+$가 최근 합성되는 등 이들 새로운 초 고에너지의 분자들의 출현이 기대된다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.467-474
• /
• 2003

Composite action can be achieved by providing shear connectors between the steel top flange and concrete topping. Composite sections are stiffer than the sum of the individual stiffness of slab and beam. They can therefore carry heavier loads or similar loads with appreciably smaller deflection. They are also less prone to transient vibration. In this study, T-type Steel Composite beam (TSC-beam) was developed and tested. The test results of TSC beam were compared with the theoretical results based on composite actions.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.61-71
• /
• 2017

The flexural behavior of composite ring stiffened by GFRP and steel pipe is presented in this paper. The effective width is required to construct FEM beam element model to verify the composite flexural behavior of stiffened ring of cylindrical shell structure. The experimental results are compared with the theoretical and FEM results by commercial program ABAQUS to verify the effective width coefficient. The yield, crack and ultimate loads is calculated using theoretical strains that varies depending on yield state and compared with experiment result and FEM results by ABAQUS solid model.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.91-97
• /
• 2001

Since the new field information of target signal is important in the development and verification of active sonar system, experimental method and simulation technique are widely used in order to analyze the detail characteristics of target scattered echoes. Therefore, in this paper, the scale target experiment is performed to develope and Improve the target signal simulation model. Since the experimental results show that the specular reflection is the major component among scattering mechanisms, the target signal simulation model based on the Geometric Optics Theory (GOT) is developed. Complex target is separated into simple shapes, known as canonical shape. The contribution from individual canonical shapes are summed with proper phase and amplitude to produce the target strength of the whole complex body. Simulated target signal is compared with the experimental results and discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.197-204
• /
• 2006

This experimental study of prominent section bending behavior beam without shear connector provides bond capacity between concrete profile and initial stiffness of SC beam by comparing the test result with a theological analysis result and an ANSYS(common structural analysis program) analysis result. The compared result provides a fundamental study for practical use of efficient SC beam. Test result indicates 88%-98% rate of theological result in moment capacity and composition ratio shows 30%-70%. In other words, the results are insufficient to make a complete composite action. Therefore, it is need to make pull shear connection of connection method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.914-924
• /
• 1991

It has been generally used for PLL(Phase Locked Loop) to be synthesized randomly chosen frequency state, but the PLL locking time was inevitable element. A direct digital synthesizer. Which makes output frequency directly in sine wave by a phase accumulating method, could be leiminate the defect, although a phase distortion in frequency spectrum. In order to improve this disadvantage, the phase accumulating method is reconsidered in the side of he output wave formula expression. A new mechanism is proposed, and it is constructed by a most suitable logic elements. The spectrum of synthesized sine waveform is simulated and compared with a measured value, and it’s the coherence frequency hoppong state with the PN(Pseudo Noise) code sequence is confirmed. In this results, the power levels of phase distortion harmonics are decreased to 10~25dB and bandwidths are increased to 420kHz.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.94-100
• /
• 1999

In this paper, we are implemented the courseware targets to the integrated a digital system analysis, a design theory, and a hardware description language training and a logic analysis. This paper consists of two subjects. One is that the learning of a digital system analysis, that of a design theory, and the training of a hardware description language is simultaneously performed. The other is that the experiment of courseware. To learn the hardware description language, the explanation using sound or moving images, setting-up of a simulation or a synthesis program, and simulating are executed on a courseware. And also, we proposed an integrated systems for the hardware description language and a logic synthesis. Also, The reliablity of the tool was verified to be preyed an efficient operation of an implemented digital system courseware tool by korea computer research association.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.173-178
• /
• 2001

부분구조 합성법(substructuring or substructure synthesis)은 부분구조(substructure)의 주파수 응답함수(FRFs, frequency response functions)를 이용하여 합성된 전체 구조물의 동특성(dynamic behavior)을 파악하는 기술로서 이에 관한 이론은 명확하며 간단하다. 즉, 역행렬 계산과 같은 기본적인 행렬연산으로 부분구조 합성을 수행한다. 그러나, 여러 가지 요인으로 인하여 계산된 합성 결과는 실제로 결합된 전체 구조물의 동특성과는 차이를 보인다. 현실적인 이유로 고려하지 못하는 회전자유도와 실험에서 수반되는 여러 가지 측정오차는 주요한 요인이며 이에 대한 연구 또한 많이 진행되었다. 본 연구에서는 이러한 요인 중, 상대적으로 덜 중요하게 평가된 모드자름 오차(modal truncation error)의 영향을 고려한다. 단순한 구조물에 대하여 모의실험을 수행함으로써, 모드자름 오차로 인하여 완전히 잘못된 합성 결과가 나을 수 있다는 것을 보인다. 측정된 FRE를 이용하여 이러한 오차를 보정(compensation)하는 소개하고 이를 대상 구조물에 적용하여 모드자름 오차의 영향을 상당히 줄일 수 있다는 것을 보인다. 복잡한(complicated) 구조물에 대하여 모드자름 오차의 영향을 줄이기 위해서 모든 FRFs를 보정하는 것은 어려우므로 현실적인 대안을 모색한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.516-519
• /
• 2002

멀티미디어 기술 발전으로 인하여 최근 에듀테인먼트에 관하여 많은 연구가 이루어지고 있다. 에듀테인먼트(edutainment)는 교육(education)과 놀이(entertainment)의 합성어로 교육용 소프트웨어에 놀이를 가미하여 게임 하듯이 즐기면서 학습하는 방법이나 프로그램을 말한다. 본 논문에서는 에듀테인먼트의 이론적 형성과정인 놀이, 게임과 교육의 관계를 역사를 통하여 살펴보아서, 에듀테인먼트의 과학적 개발과정의 이론적 토대를 마련하는 것을 제안한다.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.6
• /
• pp.671-680
• /
• 2000

This paper provides the results of the study on the structural behavior of the composite metal deck slab system. The experimental study on composite slabs with trapezoidal and inverse-triangle-top-flange deckplate result, it was found that the geometry of the cross-section was more important than any other factors to ensure the composite action of deck slabs. Hence the inverse-triangle-top-flange of closed box was more effective on the shear slip and deflection than the trapezoidal deck of open shape. These results show that the continuing development of composite deck plate must consider importantly the geometry of the deck. The experimental results were compared with established formulas and were analysed to advance a theory on composite slabs using deckplates.