• Journal of the Korean earth science society
• /
• v.26 no.6
• /
• pp.560-572
• /
• 2005

This study investigates the characteristics of atmospheric circulation and the heat source $(Q_1)$ related to the winter cold surge in Korea from 1979 to 1999. The occurrence frequency of cold surge is about one event per year and $60\%$ of the total events occurred during the former period, before 1989. During the cold surge, the pressure pattern shows more dominant east-west dipole circulation pattern in the lower troposphere and the effect of upper level trough is stronger than normal cases. Temperature falling pattern over Korea shows that the pattern opposite to the temperature structure over Lake Baikal and temperature change has opposite signs between the low-middle level and upper level, with the boundary at 400 hPa. The analysis of heat source shows that atmospheric cooling by cold advection during the cold surge is balanced by adiabatic warming due to downward motion, indicating that the movement path of cold core is associated with that of heat sink. Therefore, the movement mechanism of the heat source and sink should be well known for understanding the maintenance mechanism of cold surge and predicting cold surges.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.329-336
• /
• 2000

Welding is a important technological method in mechanical engineering. $CO_2$MAG(metal active gas) welding means that metal part in double capstan drum for the inshore and costal vessels are joined by melting(with or without a filler material) or that new material is added to a metal part by melting. The thermal stresses appear due to a non-uniform temperature field, inhomogeneous material properties, external restraint and volume changes during phase transformations. In this study analysis the elasto-plastic thermal stresses distribution of welding part in double capstan drum for the inshore and costal vessels using finite element method (FBM). Therefore it calculates the numerical value that can be applied to the optimum design of welding parts and the shapes. The significant results obtained in this study are summarized as fellows. At early stage of the cooling after welding process, the abrupt thermal stresses gradient has been shown in the vicinity of welding part. In the thermal stresses analysis due to temperature gradient and heat shocking maximum stress was occurred of welding part and stresses were distributed from 54MPa~48MPa.

• Solar Energy
• /
• v.17 no.3
• /
• pp.43-49
• /
• 1997

Cycle simulaton of the double effect parallel flow model is applied to a Lithium-Bromide/water system, with the objective of evaluation the possibilities of effectively utilizing waste-heat as a secondary heat source for the low-temperature generator. In this study, cycle simulation has been carried out to clarify the effect heat exchange in order to predict the performance of absorption refrigeration cycles using waste heat.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.617-624
• /
• 2010

Line heating is a manufacture method, which was widely used to machining a curved surface in the ship construction. The qualities using by line heating are very difference compare to the proficiency level of the engineer. So it's mainly depend on the automation equipment instead of the proficiency level engineer. In this study, it would be investigate the temperature distribution of the heating plate, which was used by the automation equipment according to line heating. The main factors are the moving velocity of the heating source, strength and the heating method separately, in temperature distribution while line heating. In this paper, it was investigated the temperature change with the vary of each three variables. The numerical result showed that peak temperature decrease if the moving velocity of the heating source increased. It can also calculate the change quantitatively that the peak temperature and temperature distribution changed linearly with the vary of the heating source.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.41 no.9
• /
• pp.28-35
• /
• 2012

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.1-2
• /
• 2004

강구조물 제작시 용접프로세스에 의해 용접부 근방에서는 용접열원에 의해 급속가열ㆍ급속냉각의 열 사이클을 받으며, 열원의 이동과 함께 온도장이 변화하므로 용접부에 불균일한 온도분포가 발생된다. 이러한 불균일한 온도분포에 의한 용접부 근방의 열팽창ㆍ수축을 용접부로부터 떨어져 있는 저온상태의 부재가 이를 구속하여 결과적으로 용접변형과 잔류응력이 발생한다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.549-550
• /
• 2011

• Journal of Welding and Joining
• /
• v.13 no.1
• /
• pp.138-144
• /
• 1995

Recently, as the industrial structure tends to become large, the thickness of structural plate becomes thicker. Therefore, the thicker the plate of welded structure is, the larger the shape of welded joint. The effect of large heat input makes large heat affected zone(HAZ). These bring to complict welding residual stress and to weaken material, which may cause extremely harm to the safety of structures. Nevertheless, welding is design is regulated by the KS, JIS or standard in the resister of shipping such as KR, ABS or LR. However, these rules are based on rather experimental than theoretical. In this study, the computer program of heat conduction, considering un-steady state and quasi-steady state, is developed for optimizing(minimizing) a shape of welded joint. The characteristics of heat on the welded joints with various shapes are clarified by the results of the analyses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.709-710
• /
• 2008

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.114.2-114.2
• /
• 2010

마이크로 반응기술은 작은 반응기 부피, 높은 열전달, 넓은 반응 면적/부피 및 정확한 반응시간 조절이 가능하기 때문에 화학공정의 고집적화, 반응 선택도의 향상 및 안전도 향상을 꾀할 수 있는 장점이 있다. 이러한 마이크로 반응 기술을 중소형 천연가스 및 국내에서 소규모로 국지적으로 발생하는 메탄의 활용 방안으로서 개발함은 청정 합성유를 제조함으로서 석유 자원의 고갈과 고유가에 대비하여 에너지 자원의 다변화 및 자립을 확보 할 수 있다. 본 연구에서는 마이크로 반응기술을 적용한 미세 유로 반응기(Micro Channel Reactor)를 사용하여 메탄 스팀 개질 반응 특성을 연구하였다. 미세유로 반응기는 내부 홀이 존재하는 plate를 적층함으로 반응기내에 반응가스가 이동할 수 있는 미세유로가 존재하게 하였다. 이러한 미세유로는 반응기의 크기가 작음에도 반응기내에서 반응가스가 충분히 반응할 수 있는 시간과 높은 열전달 효율을 가질 수 있게 한다. 메탄 스팀 개질 반응에 사용된 촉매는 Ni 촉매를 사용하였고, 반응에 필요한 열원으로는 수소 연소에서 발생한 열을 사용하여 반응을 유도하였다. 본 반응기는 외부의 열원을 사용하지 않고, 반응기 내부의 수소 연소에서 발생한 열을 사용함으로 적은 발생 열만으로 메탄 스팀 개질 반응에 필요한 에너지를 얻을 수 있고, 열의 손실이 적다. 또한 메탄 스팀 개질 반응으로 발생한 일부의 수소를 열원으로 이용하여 에너지 사용면에서도 효율적인 반응 공정이다.