• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.349-355
• /
• 2001

In this paper, we newly propose a performance enhanced CSMA/CD MAC(Medium Access Control) protocol for the Ethernet which changes its operation mode dynamically according to the network status, not fixed it as one of p-persistent mode and non-persistent mode. Dynamic mode change occurs independently on each node, and uses the consecutive success count and the fail count of the frame transmission. The simulation result shows that the dynamic mode change maintains the enhanced network utilization and transmission delay characteristics. Also we show the implementation simplicity of our MAC protocol through its conceptual design using the Ethernet commercial chip as it stands.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.143-147
• /
• 2014

In this paper, a novel MDI(Multiplex Distribution Interface) analyzer is designed in Ethernet-mode for DRM(Digital Radio Mondiale), and DRM+(Digital Radio Mondiale Plus) systems. The proposed MDI analyzer can reduce the overload of MDI packets by using memory sharing techniques into a common module block. In consequence, it verifies the received MDI packets by composition information of IP(Internet Protocol) and FAC(Fast Access Channel)/SDC(Service Description Channel) in DRM/DRM+ systems for the next generation digital radio broadcasting systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.873-878
• /
• 2001

광케이블을 이용한 기가비트 이더넷은 8B/10B 선로부호 방식을 채택하여 전이중 통신뿐만 아니라 CSMA/CD 방식의 반이중 통신을 지원토록 규정되어 있다. 또한 링크를 공유하고 있는 2대의 1000BASE-X 장치 사이에 구성정보를 교환하여 가장 적합한 통신모드로 동작시킬 수 있는 자동절충 기능을 지원해야 한다. 본 논문에서는 비교적 기능이 간단하고 구현이 용이한 기존의 전이중 방식만의 PCS 설계 방법과 비교하여 반이중 방식까지 지원할 수 있는 PCS 부계층을 기가비트 이더넷 스위치 시스템의 ASIC 칩 안에 구현한 적용 예를 바탕으로 PCS 설계 규격, 구조 및 방법 등을 제시한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.983-989
• /
• 2012

IEEE 802.3az LPI mechanism allows an Ethernet link to reduce power consumption by entering a low-power sleeping mode and letting some components being powered off when there is no data to be transmitted through the link. However, if small amount of packets are being sent periodically, such a mechanism can not obtain energy efficiency due to a high overhead caused by excessive mode transitions. In this paper, we propose an enhanced LPI mechanism which can perform state transition adaptively based on the traffic characteristics on transport layer and network status. This simulation result shows that proposed mechanism improves energy efficiency than LPI mechanism with respect to energy consumption rate for various traffic loads.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.292-301
• /
• 2014

This paper describes development of distributed type independent electro-hydraulic ballast valve remote control system with diagnostic function based on fuzzy inference using redundant Modbus communication and ethernet Modbus TCP/IP. Diagnostic function estimate degradation of system components and diagnose system faults, which results in shortage of fault maintenance time and improvement of system safety. Slave devices which control each valve and master device which command, monitor and diagnose slave system are developed. Slave devices are connected to master device with redundant Modbus networks and master device is connected to ship's integrated control system with Modbus TCP/IP. Also this paper describes development of simulator to test and confirm whether developed system can be integrated with ship's integrated control and monitoring system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.888-894
• /
• 2018

In this paper, we proposed a mixed-mode s-parameter measurement system for measuring the performance of twisted pairs. A twisted pair is a balanced type component, its characteristics can not be directly measured using network analyzer, which is generally implemented as a unbalanced type. It is possible to convert between balanced signal and unbalanced signal by using a balun but it restricts the frequency range of the measurement system. The proposed system measures the performance of twisted pairs by measuring mixed-mode s-parameters using a 4-port vector network analyzer and a designed fixture, without using a balun. We measured the performance of a commercial Ethernet cable and compared with the results which measured by using baluns. The results showed that the proposed system is capable of measuring the performance of twisted pairs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1579-1587
• /
• 2010

In this paper, we design the PCS(Physical Coding Sublayer) transmitting and receiving module for 400/1000 Ethernet and verify the performance of it through logic simulation. In this work, we defined each function module and internal/external control signals and implemented them using HDL programming language. We also designed 64B/66B encoding/decoding, scrambling/descrambling including operation mode, detection of invalid frames, and multi-lane based distribution/arrangement. It was simulated using ModelSim and verified in terms of the operation and timing according to input data. The simulation result shows that all designed modules in 400/100G Ethernet are correctly performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1575-1580
• /
• 2012

In this paper, a DVB-T2(Digital Video Broadcasting-the 2nd Generation Terrestrial) receiver is designed under a USB-type windows environment, and the baseband frames for MPEG2-TS stream(File or Ethernet Modes) are analyzed for verifying the receiver. In addition, the performance of the BICM(Bit Interleaved Coding & Modulation) module in the receiver is analyzed in terms of PLP(Physical Layer Pipe) and L1(Layer 1) signals.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.307-309
• /
• 2002

고가용성 및 고신뢰성의 분산 결함 허용 시스템의 설계와 구현에 대해서 다룬다. 이 시스템은 관리자 노드와 작업 노드 풀로 노드들을 구성하고, 각각의 노드들은 결함 허용 네트웍을 통해 통신을 하게 된다. 이 결함 허용 네트웍은 두 개의 네트웍이 중복되게 구성되어 한 네트웍의 결함 시에도 정상적인 데이터 교환을 보장한다. 여기서 중복된 네트웍을 위한 결함 검출 복구 기법이 필요하고 이들 관리자 노드와 작업 노드들의 관리를 위해 결함 허용 미들웨어가 포함된다. 미들웨어의 기능에 적응형 결함 허용 기법을 도입하여 실행 시간에 결함 허용 모드를 선택할 수 있게 하고, 결과적으로 보다 높은 가용성과 신뢰성의 결함 허용 시스템을 구성하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1168-1173
• /
• 2012

In this paper, we propose a protection architecture of passive optical network (PON) system by using two optical line terminals (OLTs). Using this scheme, the network can sustain services to access area and restores normal operation in faulty conditions. Unlike existing systems, the proposed one increases the efficiency of the system by operating both OLTs using different wavelengths in normal condition. During protection mode, a Shared-bandwidth allocation scheme is employed to maximize the utilization efficiency. Performance analysis shows that the proposed scheme can provide reliability to Ethernet-based PON system very efficiently.