• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.21-30
• /
• 2002

A preconditioned Navier-Stokes code was parallelized by the domain decomposition technique, and the accuracy of the parallelized code was verified through a comparison with the result of a sequential code and experimental data. Parallel performance of the code was examined on a Myrinet based PC-cluster and a Fast-Ethernet system. Speed-up ratio was examined as a major performance parameter depending on the number of processor and the network communication topology. In this test, Myrinet system shows a superior parallel performance to the Fast-Ethernet system as was expected. A test for the dependency on problem size also shows that network communication speed in a crucial factor for parallel performance, and the Myrinet based PC-cluster is a plausible candidate for high performance parallel computing system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.785-793
• /
• 2007

This paper presents the digital signal processing submodule of a 100Base-TX Ethernet receiver to support 100Mbps at TP cable channel. The proposed submodule consists of programmable gain controller, timing recovery, adaptive equalizer and baseline wander compensator. The measured Bit Error Rate is less than $10^{-12}BER$ when continuously receiving data up to 150m. The proposed signal processing submodule is implemented in digital circuits except for PLL and amplifier. The performance improvement of the proposed equalizer and BLW compensator is measured about 1dB compared with the existing architecture that removes BLW using errors of an adaptive equalizer. The architecture has been modeled using Verilog-HDL and synthesized using samsung $0.18{\mu}m$ cell library. The implemented digital signal processing submodule operates at 142.7 MHz and the total number of gates are about 128,528.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.899-903
• /
• 2017

In this paper, it is shown the in-vehicle network architecture and implementation for multimedia service which supports Human machine interface of multi-passengers. For multi-passengers' vehicle, it has to be considered the factor of network traffic, simultaneously data transferring to multi users and accessibility to use variety of media contents for passengers compared to conventional in-vehicle network architecture system Therefore, it is proposed the change of network architecture compared with general MOST network, implementation of designed software module which can be interoperable between ethernet and MOST network and accessible interface that passenger can be plugged into MOST network platform using their device based on ethernet network system.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.265-270
• /
• 2012

The subscriber access network is cause of the bottleneck phenomenon because equipment and infrastructure were not originally designed for busty high-bandwidth traffic between MAN(Metro Area Network) and LAN(Local Area Network). Whether riding on shorter copper drops or optical fiber, Ethernet is emerging as the future broadband protocol of choice, offering plug and play simplicity, and low cost. EPON(Ethernet Passive Optical Network) combines point-to-multipoint optical infrastructure with low-cost high-bandwidth Ethernet. The future broadband access network will be a combination of point-to-point and point-to-multipoint Ethernet, optimized for transporting IP data, as well as time critical voice and video. EPON is being considered as a novel communications infrastructure for next-generation broadband access network for the convergence of low-cost Ethernet equipment and low-cost fiber infrastructure. But, EPON has a problem with duplex multimedia services. It is the insufficiency of bandwidth for upstream. Because all ONUs use a shared transmission media for upstream. In this paper, we addressed the problem of upstream bandwidth in EPONs. We presented a wavelength division EPON supporting QoS in the differentiated services framework.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2015

To realize futuristic services with agility, the role of the experimental facility (i.e., testbed) based on integrated resources has become important, so that developers can flexibly utilize the dynamic provisioning power of software-defined networking and cloud computing. Following this trend, an OpenFlow-based SDN testbed environment, denoted as OF@TEIN, connects multiple sites with unique SmartX Racks (i.e., virtualization-enabled converged resources). In this paper, in order to automate the multi-point L2 (i.e., Ethernet) inter-connection of OpenFlow islands, we introduce an automated tool to configure the required Network Virtualization using Generic Routing Encapsulation (NVGRE) tunneling. With the proposed automation tool, the operators can efficiently and quickly manage network inter-connections among multiple OpenFlow sites, while letting developers to control their own traffic flows for service realization experiments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2008

This paper considers the multi-objective optimization of a multi-service arrayed waveguide grating-based single-hop WDM network with the two conflicting objectives of maximizing throughput while minimizing delay. This paper presents a genetic algorithm based methodology for finding the optimal throughput-delay tradeoff curve, the so-called Pareto-optimal frontier. Genetic algorithm based methodology provides the network architecture parameters and the Medium Access Control protocol parameters that achieve the Pareto-optima in a computationally efficient manner. The numerical results obtained with this methodology provide the Pareto-optimal network planning and operation solution for a wide range of traffic scenarios. The presented methodology is applicable to other networks with a similar throughput-delay tradeoff.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.49-54
• /
• 2016

In this paper, we propose an Arduino-based effective home security monitoring system. Proposed home security monitoring system consists of arduino which is inexpensive main processor, ultrasonic sensor and human body detection sensor to detect whether someone breaks into home. Data from ultrasonic sensor and human body detection sensor are transmitted to web server via ethernet shield connected to arduino. Web server checks whether someone breaks into home by using stored data from ultrasonic sensor and human body detection sensor. Snapshot is photographed via webcam connected by using JQuery. Photographed snapshot is stored in web server as image file. A user can monitor in web or smart device environment by using HTML5, CSS and Canvas. When examining efficiency of proposed home security monitoring system, it was found that proposed system is easier to be made than existing home security system and is cost effective by using arduino and is efficient and convenient and stable as it enables a user to handle an error in person and it uses reliable data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.73-82
• /
• 2011

As a demand of IP based packet service is increasing, transport network is evolving from circuit based transport technology using TDM to Ethernet based packet transport technology. In this paper we introduce packet transport network based on PBB-TE and MPLS-TP and propose a quality of service(QoS) management scheme to satisfy various user requirements in packet transport network. The proposed flow-based QoS management scheme guarantees that per-flow bandwidth control satisfies the predefined QoS requirement perfectly under bandwidth congestion condition by using perflow and per-PTL tunnel management. In order to evaluate the proposed scheme we defined flow and PTL tunnel per input frame and configured QoS parameters for each flow and PTL tunnel respectively. Simulation was done by using OPNET modeler 16.0 version.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1096-1101
• /
• 2004

By a tremendous expansion of Internet users, there's a number effects that cause the phenomenon of bottlenecked switching packets from routers. In order to tear down this problem, distributed system is applicable to almost every highly performed router systems. The main processor of distributed system, which manages routing table, commands IPC to delivering the forwarding table line processor that eases functionalities of the router. This makes the system having wired-speed forwarding function based on the hardware so that the performance of the network can be enhanced. Therefore, IPC, which assign a part of router, is necessary to exchange data smoothly and the constitution of IPC using Ethernet is widely adapted as a method for saving investment. In this paper, R-IPC mechanism improve the packet-processing rate over 10% through changed from defect of conventional Ethernet IPC, that is, 2 layer processing to TCP/IP or UDP/ IP into 1 layer processing for efficient packet forwarding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1579-1588
• /
• 2014

The LAN method is the most widely used in domestic high-speed internet access and rapidly moving to 1 Gbps Ethernet from 100 Mbps one to provide high-speed services such as UHD TV. The 1000BASE-T PHY with 4 pairs UTP transmits a PAM-5 signal at the 125 MHz clock per each pair to achieve 1 Gbps rate. In order to correct errors over the channel, the transmitter uses a TCM which is combined the convolutional encoder and PAM-5, and the receiver uses the Viterbi decoder. In this paper, we implement a Viterbi decoder which can correct two pair errors and operate at the least 125 MHz clock speed. Finally, we will verify the error correction function and the operating speed of the implemented decoder with a logic analyzer.