• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.197-199
• /
• 2018

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper is prepared in the main control board to support the industrial communication protocol conversion, control, and monitoring. The industrial communication gateway module is also designed to ensure that the protocol conversion of CAN bus and Ethernet. The main board processor is used the Atmega2560, and placed 4ea RS485 serial slots for sub-board. One of them is used for communication CAN bus and Ethernet. It provides analog and digital I / O through each of the slots is used for control and monitoring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.197-209
• /
• 2010

In this paper, We have designed and analyzed a characteristics of backplane channel having 40 inch strip line length of four lanes and Flame Retardant four (PR-4) material, and have designed 40 Gb/s Receive and adaptive equalizer and its high-speed equalization algorithm using the backplane channel characteristics. For 40 Gb/s high-speed data communications pass through the backplane, a 10Gb/s 4 channel receive & equalizer with DFE except for FFE was proposed. This receive and equalizer meets the requirements of the IEEE Std P802.3ba standard-based receive equalizer to implement equalizers on the receive end of a 46 inch length's backplane channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1575-1580
• /
• 2012

In this paper, a DVB-T2(Digital Video Broadcasting-the 2nd Generation Terrestrial) receiver is designed under a USB-type windows environment, and the baseband frames for MPEG2-TS stream(File or Ethernet Modes) are analyzed for verifying the receiver. In addition, the performance of the BICM(Bit Interleaved Coding & Modulation) module in the receiver is analyzed in terms of PLP(Physical Layer Pipe) and L1(Layer 1) signals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.324-326
• /
• 2011

As development of education contents has become more active, it is not much that way to preserve copyright of S/W consuming contents. So this paper studied way to preserve copyright of S/W from MAC address of ethernet and hard disk volume serial number. This study realizes the simple but powerful security algorithm to preserve copyright. So this tightens to preserve copyright of S/W of education contents and will contributes to decrease damages because of using illegal S/W.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.722-729
• /
• 2005

Ethernet passive optical networks (EPONs) are an emerging access network technology which has a point-to-multipoint topology. EPONs operate point-to-multipoint in the OLT-ONU direction, and point-to-point in the ONU-OLT direction. To support point-to-point emulation and shared LAM emulation, EPONs use multi-point control protocol (MPCP). The MPCP uses logical link identification (LLID) field for frame tagging and filtering between the OLT and ONUs. In this paper, I propose logical-group identification (LGID) for logical link-based multicasting or VLAN services in EPONs. Using LGID with new frame tagging and filtering rules, EPONs support differentiated multimedia broadcasting or multicasting services. Additionally, EPONs can support logical link-based VLAN services that divides ONUs into several subsets.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.42-52
• /
• 1998

This paper proposes an extended TCP/IP protocol, LAN/TCP, that can be used for the distributed soft real-time systems connected through the Ethernet-based local area network. Since LAN/TCP shows soft real-time performance with keeping compatibility and interoperability with the standard TCP/IP, the existing application software can be used without any modification. LAN/TCP also provides the periodic transmission mode(PTM) with which the periodical data collection and updating the control signals can be efficiently implemented with relatively small traffic overhead. This paper includes the computer simulation and experimental results of the proposed protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.181-186
• /
• 2017

IEC 61850 is a standard for power utility automation. Using IEC 61850 that uses ethernet may consume more costs for the automation than its value in small distribution substations. Thus, less expense and installation cost are required for the automation of small distribution substations. This study used inexpensive and easy-to-install IEEE 802.15.4 and implemented a bridge between IEC 61850 and IEEE 802.15.4, using Raspberry Pi to connect the existing IEC 61850. Using IEEE 1588, IEC 61850 traffic performances were evaluated, such as SV, GOOSE and MMS. Analyzing IEC 61850 requirements and performance evaluation results, the scope of application of IEEE 802.15.4 was decided.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.63-68
• /
• 2009

As the complexity of the power system becomes higher, tests of the new devices, such as exciter and PCS(Power Conversion System) of the distributed generation sources, in the real operating condition are more important. However tests of the unverified devices in the real power system may cause hazardous malfunction of the system. In order to avoid this problem, power devices may be tested with the real-time simulators instead of the real power system. This paper presents an real-time multi machine power system simulator using PCs(Personal Computer) and Fast Ethernet. Developed real-time simulator performs the electro-mechanical dynamic simulation of multi-machine power system by the network distributed computing technique. Because the simulator consists of usual PCs and Fast Ethernet, it is possible to make up a simulation system very cheaper than the conventional real-time simulator which consists of dedicated expensive hardware devices. The performance of the developed simulator is tested and verified with the scaled model excitation system. The test which adjust the control parameters of the exciter is performed with the well-known New England 10 generator 39 bus sample power system.

• KIISE Transactions on Computing Practices
• /
• v.23 no.1
• /
• pp.80-84
• /
• 2017

Existing operating systems experience scalability issues as the number of cores increases. The network I/O performance on manycore systems is faced with the major limiting factors of cache consistency costs and locking overheads. Legacy methods resolve this issue include the new microkernel-like operating system or modification of existing kernels; however, these solutions are not fully application transparent. In this study, we proposed a library that improves the network performance by separating system call context from user context and by applying the core affinity without any kernel and application modifications. Experiment results showed that our implementation can improve the network throughput of Apache by up to 30%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.888-894
• /
• 2018

In this paper, we proposed a mixed-mode s-parameter measurement system for measuring the performance of twisted pairs. A twisted pair is a balanced type component, its characteristics can not be directly measured using network analyzer, which is generally implemented as a unbalanced type. It is possible to convert between balanced signal and unbalanced signal by using a balun but it restricts the frequency range of the measurement system. The proposed system measures the performance of twisted pairs by measuring mixed-mode s-parameters using a 4-port vector network analyzer and a designed fixture, without using a balun. We measured the performance of a commercial Ethernet cable and compared with the results which measured by using baluns. The results showed that the proposed system is capable of measuring the performance of twisted pairs.