The purpose of this study was to comparatively evaluate thermal and water transmission properties of several vapor permeable water repellent (VPWR) fabrics and synthetic battings that became available in recent years. Five VPWR fabrics evaluated were Hipora in three coating variants, $Gore-Tex^{\circledR}$ and $Aitace^{\circledR}$. Battings evaluated were $Viwarma^{\circledR}$, $Uniwarmr^{\circledR}$, $Thinsulate^{\circledR}$, and $Airseal^{\circledR}$ Thermal resistance and water vapor transmission were measured for each fabric and batting and in all combinations. Thermal resistance at zero and 37 cm/sec air velocity was determined by the Thermo Labo II technique for simultaneously measuring conduction and radiation heat transfer. Water vapor transmission over 24 hours was measured by a modified weight-gain method in a compact humid chamber at conditions simulating the clothing climate under heavy exercise ($40{\pm}1^{\circ}C$, $90{\pm}2\%$ R.H., and 0.5 m/sec air velocity). Fabric porosity was calculated from fiber density and fabric weight, thickness, and area. Thermal resistance results for the fabrics showed the effectiveness of coatings in inhibiting heat transfer. Measurements taken in wind were: $31.1\~37.6\%$ for $Hipora^{\circledR}$ variants; $31.0\%$ for $Gore-Tex^{\circledR}$; and $18.4\%$ for $Aitaca^{\circledR}$ Measurements without wind were higher but in the same order. Water vapor transmission results were in reverse order: $Aitac^{\circledR}$, $8.8 kg/m^{2};\;Gore-Tex^{\circledR}$, 6.4 kg/$m^{2}$; and $Hipora^{\circledR},\;4.4\~6.0\;kg/m^{2}$. In general thermal resistance increased with porosity. For battings, the thermal resistance with wind results were: $Viwarmu^{\circledR}$, $65.0\%;\; Thinsulate^{\circledR}$, $62.0\%$; $Uniwarm^{\circledR}$, $61.0\%$; and $Airseala^{\circledR},\;53.1\%$. Thermal resistance was proportional to thickness. Thermal resistance of fabric-batting combinations were $20\%$ higher than those of the battings only. Water vapor transmission for combinations was mainly affected by that for the VPWR fabric used.
The purpose of this study was to evaluate thermal properties of Taekwondo wears with three different materials. As a begging step, the questionnaire survey about the actual condition of Taekwondo wears was conducted. With the results of the questionnaire, cotton/nylon(70/30) blended fabric(CN) that was newly woven with sweat absorbent finishing and cotton/spandex(95/5) blended fabric with flexibility property were developed. The same designed 3 Taekwondo wears with 3 different materials which were two different materials(CN and CS) and a current material(cotton/PET, CP) were made. Four young males volunteered for this study, they kicked and punched as Taekwondo action for 20 minutes. Mean skin temperature was the highest in CS(33.1${\pm}$0.8$^{\circ}C$) and the lowest in CP(32.7${\pm}$0.6$^{\circ}C$). Increasing degree of rectal temperature didn't show any significant difference. Clothing microclimate temperature on the thigh was higher in CS(32.8${\pm}$17.4$^{\circ}C$) than in CN(29.4${\pm}$1.1$^{\circ}C$) and CP(29.4${\pm}$1.0$^{\circ}C$). Clothing microclimate temperature on the back and humidity on the thigh didn't show any significant differences. Clothing microclimate humidity on the back was higher in CP(65${\pm}$20%RH) than in CS(61${\pm}$17%RH). Heart rate, total body weight loss, and local sweating were not significantly different by materials. Most subject responded more hot in CN than in others, but there were no significant differences at the subjective sensation of thermal humidity. They answered more comfortable in CN than in others. Tectile sensations were the best in CN and the worst in CS. From those results, first of all, it is necessary to be weighted on Taekwondo wears made of CN in the aspects of the dignity of military arts uniform. Secondly, CS was required to be lighted and enhanced for the subjective sensation. Third, CP weaved honey comb was asked more various design to eliminate sweat high competition power within the scope of the dignity of military arts uniform.
천잠 견단백질을 이용한 비의류용 소재개발을 위한 기초 연구의 일환으로 천잠 가수분해 견단백질 분말을 제조하여 그 구조 및 별 특성을 살펴보고 중금속 함량을 분석하였다. 1. 천잠 고치를 가수분해하여 제조한 분말의 평균분자량은 430 정도였으며 아미노산 조성 분석 결과 일반적인 천잠 견피브로인의 조성과 유사하였다. 2. 천잠 분말의 X-선 회절 분석 결과 $2{\theta}=20.34^{\circ}$ 부근과 $31.5^{\circ}$ 부근에서 강한 회절 피크를 보였으며 원이색분석 결과 220nm의 피크와 215nm의 shoulder를 나타내어 ${\alpha}-helix$와 ${\beta}-sheet$ 구조임을 알 수 있었다. 3. 시차열분석 및 열중량분석 결과 천잠 가수분해 분말은 $250^{\circ}C$ 부근에서 열분해 흡열피크를 보였으며 $270^{\circ}C$ 부근에서 열분해에 의한 최대 중량감소가 나타났다. 4. 천잠 분말에서는 수은, 비소 등 인체 독성이 강한 중금속을 관찰할 수 없었으므로 기능성 소재 개발을 위한 재료로 천잠 가수분해 분말을 활용할 수 있을 것으로 사료된다.
A study on compressive garments guarantee the required pressure and form depending on the type of disease and the state of injury can be used in the preventive treatment of cardiovascular disease. This research is to provide a preliminary data to develop medical clothing products, especially knitted compression garments. Starting from analyzing knitted structure of imported pressure goods to apply to test samples, 11 kinds of knitted stretchy fabrics were manufactured under the various knitting conditions, then their tensile, mechanical and hand properties were measured. In comparison size changes by knitting structure, tuck stitch applied structure showed an increase in course direction and decrease in wale direction. Float stitch applied structure indicated the contraction of size in width because of unformed loops and floated yarn on the technical back of fabric. As a result of tensile properties in tuck and float applied structure, tensile strength was increased in the course direction. On the other hand, the more loops overlapped due to the tuck and float stitch, the more decreased their elongation and elastic recovery were. In case of mechanical properties, as the tuck and float stitch were overlapped double or triple the bending and shearing properties were risen. Accordingly, the drape of fabric becomes stiff, and its surface becomes rough and uneven. The measurements of hand properties showed that the value of KOSHI, FUKURAMI NUMERI in tuck and float applied structure are higher than the plain structure. This results from the relationship between the mechanical and hand properties.
As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.
VMD는 보여주기 위한 매장에서 잘 팔리는 매장으로써 갖고 싶은 것이 있는 매장, 찾아가고 싶은 매장, 사기 쉬운 매장으로 만들어가야 한다. 정보디자인을 VMD에 이용하여 잘 팔리는 매장을 만들기 위하여 1차 조사로써, 광주광역시의 여성을 대상으로 소비성향과 구매형태를 질문지조사 방법을 통하여 실시하였다. 2차 조사는 디자인과 유행에 민감한 여자 대학생을 대상으로 조사하였다. 3차 조사는 광주광역시에 소재하고 있는 백화점 내 의류를 취급하는 매장을 대상으로 질문지 조사를 실시하였다. 연구조사결과 VMD의 효과가 가장 크게 나타나는 곳은 백화점이라고 할 수 있으며 전체적인 문제점으로 각 매장의 특성을 살리지 못하고 획일적인 디자인을 추구한다는 것을 알 수 있었다. 그리고 VMD의 추진 운영상 당면한 문제점으로 디스플레이, 진열 등 미관의 한계를 벗어나지 못하고 있으며 실제로 매출 증대에 기여하지 못하고 비용만 많이 들어가고 일만 많아졌다는 부정적인 시각이 많았다. 정보 디자인은 VMD운영에 필수적이고, 사용자에게 보다 효율적인 전달을 위해 그래픽 요소를 활용 시각화되어야한다. 정보는 조직화되어야하고, VMD운영은 획일화 되어서는 안 되고, 업종과 특성에 따라 차별화시켜야 한다. 그리고 전사적으로 토탈화시켜 나아가야 할 것이다.
This study investigated the physical properties of warm up yarns and their knitted fabrics including the dye affinity and color fastness to washing of these knitted fabrics according to the various dyeing times and temperatures on dyeing process. The results were summarized as follows. The tenacity of Nylon/PP warm-up yarn was 4g/d and breaking strain was 4.5%. The wet and dry thermal shrinkages were higher than those of PET warm-up yarn. The maximum heat flow rate(Qmax) of Nylon/PP warm-up knitted fabric was lower than that of PET warm-up knitted fabric and heat keeping rate(a) of Nylon/PP warm-up knitted fabric was higher as 47% than that of PET warm-up knitted fabric. It was shown that the shape retention and wearing comfort of Nylon/PP warm-up knitted fabric were better than those of PET warm-up knitted fabric. The dye-affinity(K/S) of Nylon/PP warm-up knitted fabric showed maximum value at the dyeing condition of 40minute or 50minute dyeing time with $80^{\circ}C$ dyeing temperature, but PET warm-up knitted fabric showed maximum value at the 30minute or 40minute with $110^{\circ}C$ dyeing temperature. Finally, the color fastness to washing of Nylon/PP warm-up knitted fabric showed good value as between 4 and 5 grade.
This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.
웨어러블 광섬유 직물의 주요 요건은 의류에 적용하기 위해 높은 유연성을 전제로 해야 한다는 점과 인체의 평평한 부위뿐만 아니라 굴곡이 있는 구간에서도 발광 효과, 즉 휘도를 유지해야 한다는 점이다. 따라서 본 연구에서는 위 조건을 충족하는 웨어러블 광섬유 직물의 세부 구조를 직조(weaving) 타입과 자수(computer embroidery) 타입의 2가지로 제작하였고, 이를 토대로 다음의 두 가지 조건에서 실험을 실시하였다. 첫째, 굴곡이 없는 평평한 상태에서의 웨어러블 광섬유 직물을 1cm간격으로 총 10개의 측정점을 좌표화하여 그 휘도를 측정하였다. 둘째, 인체 부위 중 입체적 굴곡이 발생하는 팔뚝 부위에 가로 방향으로 웨어러블 광섬유 직물을 배치하고 1cm 간격으로 총 10개의 측정점을 좌표화하여 그 휘도값을 측정하였다. 그 결과 직조(weaving) 타입의 경우, 평평한 상태에서의 휘도값은 최대 $5.23cd/m^2$, 최소 $2.74cd/m^2$, 평균 $3.56cd/m^2$, 표준편차 $1.11cd/m^2$로 나타났고, 팔뚝 부위에서의 휘도값은 최대 $7.92cd/m^2$, 최소 $2.37cd/m^2$, 평균 $4.42cd/m^2$, 표준편차 $2.16cd/m^2$로 나타났다. 또한 자수(computer embroidery) 타입의 경우, 평평한 상태에서의 휘도값은 최대 $7.56cd/m^2$, 최소 $3.84cd/m^2$, 평균 $5.13cd/m^2$, 표준편차 $1.04cd/m^2$로 나타났고, 팔뚝 부위에서의 휘도값은 최대 $9.62cd/m^2$, 최소 $3.63cd/m^2$, 평균 $6.13cd/m^2$ 표준편차 $2.26cd/m^2$ 나타났다. 즉, 자수(computer embroidery) 타입의 경우가 직조(weaving) 타입의 경우에 비해 더 높은 발광 효과를 보였는데 이는 자수(computer embroidery) 타입의 세부 구조가 배면 소재로 인해 빛의 손실을 줄일 수 있었기 때문으로 사료된다. 또한 두 타입 모두에서 팔뚝부위의 휘도가 평평한 상태에 비해 각각 124%, 119%로 나타나, 인체의 굴곡에도 본 웨어러블 광섬유 직물의 발광효과가 우수하게 나타남을 알 수 있었다. 이는 빛의 파동설을 정의한 호이겐스의 원리(Huygens' principle), 빛 파면의 진행 방향과 이루는 각도(${\theta}$)의 크기에 커지면 이와 비례하여 빛의 세기도 커진다는 호이겐스-프레넬-키르히호프 원리(Huygens-Fresnel-Kirchhoff principle)와 일치하는 결과이다.
본 연구의 목적은 형광직물과 재귀반사 소재만으로 제작, 보급되고 있는 현 안전의복에, LED 부착으로 시인성을 높여 야간이나 기상악화 시 안전사고로부터 작업자나 보행자를 보호하고, 기울기 센서와 소리신호를 탑재하여 의식불명자의 구명에 도움을 주는데 있다. 이를 위하여 공학적 하이테크를 적용하여 설계·제작한 산업용 서스펜더형 안전벨트 및 기울기 센서와 소리신호가 탑재된 안전조끼형 벨트를 개발하였다. 그 효과로 첫째, 서스펜더형 안전벨트는 필름에 접착된 자동 점멸 LED에 의해 빛을 방출하도록 설계하여 벨트 착용자의 신체는 LED와 재귀반사를 통해 멀리서 인식되어 사고예방에 도움이 된다. 또한 야간에 실시하는 도로변이나 고지대에서의 작업, 구조대원 활동, 스포츠 활동 시사고를 예방하거나, 비상상황이 발생할 경우 LED 발광을 변화시키는 신호로 사고 지점을 빨리 발견할 수 있어 인명구조에 도움이 된다. 둘째, 착용자가 조난사고 등으로 인하여 의식불명으로 쓰러질 경우, 조난신호를 발생하는 첨단 디바이스를 개발하여 감지 및 신호 장치를 탑재한 결과 제어부의 기울기 센서가 인체의 각도를 자동 감지하였다. 동시에 조끼형의 벨트 형태로 제작함으로써 탈착이 용이하도록 하여 활용도를 높였다. 사고로 착용자가 쓰러지면 이 벨트의 기울기 센서가 각도를 감지하고 제어기가 고주파 음과 LED 점멸신호를 동시에 발생시킨다. 기존의 안전 조끼의 경우 주변 조명이 없을 때는 조끼를 착용한 사람을 감지하는 것이 거의 불가능 하였지만, 본 연구에서는 안전벨트의 음향과 빛 신호로 주변 조명이 없을 때에도 100 m 이내에서 착용자를 발견할 수 있었다. 그러므로 본 연구에서 LED 부착과 기울기 센서, 소리신호 소자를 부착한 스마트 안전의류의 개발은 사고발생 감소와 구명에 이바지할 수 있을 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.