• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.22-22
• /
• 2010

주물과 용접에서 응고 과정에서 수지상간 또는 세포상간 영역에서 최종적으로 응고하는 저융점 공정 조성의 상이 응고균열의 발생에 직접적으로 영향을 미친다. 작은 량의 공정조성의 액상 필름이 응고된 고상과 고상 사이에 존재하게 되면 이 영역에서 생성되는 불연속부는 응고균열로 남게 된다. 이러한 공정조성 액상의 유동성이 좋고 충분한 부피로 존재한다면 응력과 부피수축등으로 생성된 수지상간, 또는 세포상강 영역에서 생성된 불연속부로 용이하게 유동하여 불연속부를 충진하게 된다. 따라서 발생한 응고균열이 치유되는 효과를 얻을 수 있다. 반면에 공정조상의 상이 전혀 존재하지 않는 순금속 응고의 경우에는 최종 응고 단계에 액상 필름이 존재하지 않게 되어 고상과 고상의 인터로킹이 가능하게 되어 균열 발생 가능성이 희박하다. 따라서 응고균열 발생을 제어할 수 있는 효과적인 방법은 용탕이나 용접금속의 조성을 공정 조성에 가깝게 제어하는 것이다.

• Journal of Welding and Joining
• /
• 제20권2호
• /
• pp.1-3
• /
• 2002

전 호에서는 용접부와 밀접한 관계가 있는 가스의 성질 및 가스가 용접부에 미치는 영향에 대하여 서술하였다. 본 호에서는 용접부의 균열 및 그 방지에 대하여, 먼저 용접 부에서 발생하는 균열의 종류와 고온균열 중의 일부를 소개하기로 한다 고온균열은 응고균열, 연성저하균열, 액화균열로 크게 나눌 수 있으며, 총 3회에 나누어 서술한다.

• Journal of Welding and Joining
• /
• 제12권1호
• /
• pp.28-37
• /
• 1994

본 소고에서는 Al-Zn-Mg 계통의 고강도 알루미늄합금의 제조과정에서 실시하는 열처리 공정을 통해 얻어지는 시효경화 효과, 합금원소 첨가에 따른 석출물의 생성과 이에 따른 석출경화 효과와 용착금속의 응고균열 발생과의 상호관계를 조사하고 용접열영향부의 용질원자 확산과 입계의 liquid film에 의한 액화(liquation) 균열의 생성을 분석하여 설명하고자 한다.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.20-28
• /
• 1999

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.78-89
• /
• 1997

This study has evaluated the weld metal solidification cracking behavior of several Ni base superalloys (Incoloy 825, Inconel 718 and Inconel 600). Austenitic stainless steels(304, 310S) were also included for comparison. In addition, a possible mechanism of solidification cracking in the fusion zone was suggested based on the extensive microstructural examinations with SEM, EDAX, TEM, SADP and AEM. The solidification cracking resistance of Ni base superalloys was found to be far inferior to that of austenitic stainless steels. The solidification cracking of Incoloy 825 and Inconel 718 was believel to be closely related with the Laves-austenite (Ti rich in 825 and Nb rich in 718) and MC-austenite eutectic phases formed along the grain boundaries during solidification. Cracking in Inconel 600 was always found along the grain boundaries which were enriched with Ti and P. Further, solidifidcation cracking resistance was dependent not only upon the type of love melting phases but also on the amount of the phases along the solidification grain boundaries.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1992년도 특별강연 및 춘계학술발표 개요집
• /
• pp.41-44
• /
• 1992

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.60-63
• /
• 2000

• 한국레이저가공학회지
• /
• 제4권1호
• /
• pp.39-48
• /
• 2001

This study was performed to evaluate basic characteristics of electron beam weldability for high strength aluminum alloys. The aluminum alloys used were A5083 and A6N01, and A7N01. The principal welding process parameters, such as accelerating voltage, beam current, welding speed and chamber pressure were investigated. The dimension and microstructure of welds were evaluated with OLM, and SEM (EDAX). In addition, weldability variation(cracking) due to process parameters was also evaluated. The degree of cracking in the EB fusion zone appears to be affected mainly by aspect ratio, such that as aspect ratio increases the cracking tendency also increases. The alloying element itself may also affect the hot cracking resistance, but its role is considered to be indirect effect such that the relatively higher vaporization pressure elements of Zn and Mg give deeper weld penetration and thus results in greater cracking tendency.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.54-60
• /
• 2016

In order to quantitatively evaluate the solidification cracking susceptibility in laser welds of three types of austenitic stainless steels (type 310: A mode, type 316-A: AF mode, type 316-B: FA mode solidifications), the laser beam welding (LBW) transverse-Varestraint tests consisted of multi-mode fiber laser, welding robot and hydraulic pressure system were performed. As the welding speed increased from 1.67 to 40.0 mm/s, the solidification brittle temperature range (BTR) of laser welds for type 316 stainless steels enlarged (316-A: from 37 to 46 K, 316-B: from 14 to 40 K), while the BTR for type 310 stainless steel reduced from 146 to 120 K. In other words, it founds that solidification cracking susceptibility could not be simply mitigated through application of LBW process, and the BTR variation behavior is quite different upon solidification mode of austenitic stainless steels.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.65-76
• /
• 1995

Weldability of DS100 and HY type high strength-toughness steel plates, tentatively produced as domestic production, was investigated. DS100 and DS130A had nearly same hardenability in HAZ in spite of its difference in Ceq. Based upon the y-groove test results, cold cracking susceptibility of DS130 was superior to that of DS100 because of its lower hydrogen level in weld metal. Solidification cracking tested by the Trans-Varestraint test was occured in all of the weld metals, and its susceptibility was high in the row of DS100, DS130A and DS130B. However, no liquation cracking and ductility-dip cracking tested by the Longi-Varestraint test with 6.0% augmented strain were detected in base metal and reheated weld metal. Toughness in the GMA welding joint was satisfied with the relative Mill Spec, even though welded joint of DS100 had relatively low impact energy especially at the weld metal.